About Promivision Packaging (China) Co., Ltd. - Plastic Foil Supplier in China

China hosts Promivision Packaging (China) Co., Ltd., which currently lists five active products in its catalogue. The company’s offerings are concentrated in the plastic film segment, specifically anti‑static skin packaging film, vacuum skin packaging film, Surlyn film, food skin packaging film, and a generic skin packaging film. Each product falls under the broader HS chapter 39 for plastics, typically classified under headings such as 3919 (self‑adhesive plates, sheets, film of plastics) or 3920 (other plates, sheets, film of plastics). The catalogue does not specify additional product attributes, but the titles indicate applications in food preservation, medical device packaging, and industrial sealing. The supplier is recorded as an imported tier with a harbor trust rating.

Product Range and Specialties of Promivision Packaging (China) Co., Ltd.

Promivision Packaging lists five distinct film types: anti‑static skin packaging film, vacuum skin packaging film, Surlyn film, food skin packaging film, and a general skin packaging film. In the plastic film market, these products are commonly produced in thicknesses ranging from 10 µm to 100 µm, with tensile strength between 30 MPa and 70 MPa depending on polymer grade. Anti‑static films usually meet a surface resistivity of 10⁶  -  10⁹ Ω/sq, while vacuum skin films are evaluated for elongation at break above 200 % to ensure conformity under vacuum. Surlyn films are characterized by a melt flow index of 2 - 5 g/10 min and provide impact resistance comparable to polyolefin films. Food‑contact versions are typically certified to FDA 21 CFR 174.300 and EU Regulation 1935/2004. Buyers typically receive these films on industrial rolls, with standard lengths of 1 000 m and widths up to 1 200 mm, packed on pallets for 20‑ft or 40‑ft containers. The material can be supplied in either mono‑layer or multi‑layer constructions, the latter incorporating barrier layers such as EVOH for improved oxygen transmission rates (often below 5 cc/m²/24 h).

Trade and Export Information - Promivision Packaging (China) Co., Ltd.

China is a major exporter of polymer films, and shipments of skin packaging films are usually classified under HS 3919 or 3920. Major import regions include the United States, the European Union, and Japan, where food‑service, medical device and consumer electronics manufacturers source such films. Buyers often request compliance documents such as FDA food‑contact certification, EU REACH registration, and ISO 9001 quality‑management certificates, although the supplier’s catalogue does not list specific certifications. Standard export terms for these goods are FOB Shanghai or Ningbo, with cargo consolidated in 20‑ft containers (approximately 15 tons of film) or 40‑ft containers (up to 30 tons). Customs inspections may involve verification of material composition, tensile strength, and moisture content, and third‑party labs such as SGS or Intertek are frequently engaged for pre‑shipment testing. For food‑related films, buyers usually require migration test reports and a declaration of compliance with the EU Framework Regulation 1935/2004. Industrial tape and film applications may also need flame‑retardant or anti‑static performance certificates, depending on end‑use specifications.

Sourcing from Promivision Packaging (China) Co., Ltd. - Buyer Guidance

Prospective buyers should obtain a detailed data sheet that lists film thickness, tensile strength, elongation at break, surface resistivity (for anti‑static grades) and barrier properties. Requesting a pre‑production sample enables verification of clarity, sealability and compatibility with packaging equipment. Standard documentation to request includes FDA food‑contact compliance, REACH registration numbers, and any relevant ISO certifications. Buyers typically confirm the roll dimensions, weight per roll and total container load before finalizing order quantities. Typical minimum order quantities for specialty films range from 5 tons to 15 tons, depending on thickness and width, with lead times of 30 - 45 days after sample approval. Packaging is usually in shrink‑wrapped rolls on Euro pallets, and shipments are arranged under CIF or FOB terms to the buyer’s preferred port. Verification of third‑party test reports and a Certificate of Origin can reduce customs delays and facilitate smoother entry into regulated markets.

What types of skin packaging films does Promivision Packaging offer?

The catalogue lists anti‑static skin packaging film, vacuum skin packaging film, Surlyn film, food skin packaging film and a generic skin packaging film, all supplied as polymer laminates.

Which HS codes are applicable to these films for customs clearance?

Skin packaging films are normally classified under HS chapter 39, most commonly under heading 3919 (self‑adhesive plates, sheets, film of plastics) or heading 3920 (other plates, sheets, film of plastics).

What quality specifications should buyers verify for anti‑static films?

Buyers should check surface resistivity (10⁶  -  10⁹ Ω/sq), thickness (10 - 100 µm), tensile strength (30 - 70 MPa) and request an anti‑static performance test report.

Are food‑contact certifications required for the food skin packaging film?

Yes, buyers typically request FDA 21 CFR 174.300 compliance or EU Regulation 1935/2004 documentation, along with migration test results.

What is the typical packaging format and container capacity for these films?

Films are delivered on industrial rolls up to 1 200 mm wide and 1 000 m long, shrink‑wrapped and palletised; a 20‑ft container holds roughly 15 tons, while a 40‑ft container can accommodate about 30 tons.

What are common payment and shipping terms used for exporting these films from China?

Export transactions often use FOB Shanghai or Ningbo, with buyers arranging freight; CIF terms are also accepted for major ports.

How long does it take to produce and ship an order after sample approval?

Lead times are typically 30 to 45 days, depending on film thickness and order volume, after the buyer confirms specifications and any required test reports.