About PRIMA SAL - Plastic Bags Supplier in Lebanon

Based in Lebanon, PRIMA SAL lists six active products in its catalogue. The portfolio includes standard garbage bags, garbage bags with drawstring, T‑shirt shopping bags, HDPE plastic bags, LDPE plastic bags, and a cold‑rolled steel freezer roll. The plastic bag items fall under HS chapter 39, specifically HS 3923.21 for most HDPE/LDPE bags and HS 3923.29 for the drawstring variant, while the freezer roll is classified under HS 7209.18 for cold‑rolled steel. Materials are identified as high‑density polyethylene (HDPE), low‑density polyethylene (LDPE) and cold‑rolled low‑carbon steel, indicating both polymer and metal product lines.

The company states that it manufactures both virgin and recycled polymer grades and can supply all micron thicknesses and sizes on request. Production covers household and industrial line B2B applications, ranging from small‑capacity shopping bags to large‑capacity trash bags. The catalogue references flexible packaging bags, liner bags and HDPE bags, aligning with common industry classifications for bulk polymer film products. No additional product categories beyond those six are listed in the supplied data.

Product Range and Specialties of PRIMA SAL

The garbage bag line (HS 3923.21) is offered in HDPE and LDPE film, a material choice that typically supports tensile strengths of 10‑15 MPa for HDPE and 7‑10 MPa for LDPE, with common thicknesses from 20 µm to 120 µm. Industry standards such as ASTM D‑395 for tensile properties and ISO 9001 quality management are frequently applied to ensure durability for household or commercial waste handling. The drawstring variant (HS 3923.29) adds a sewn or heat‑sealed drawstring, a feature often required for secure closure in waste collection.

T‑shirt shopping bags, also under HS 3923.21, are usually produced in lightweight HDPE or LDPE film with thicknesses between 15 µm and 30 µm, suitable for retail carry‑out applications. The separate HDPE and LDPE plastic bag listings indicate the supplier can provide single‑material bags that meet food‑contact requirements when certified to FDA or EU Regulation 1935/2004. The freezer roll (HS 7209.18) is a cold‑rolled low‑carbon steel strip, commonly supplied in widths of 1000‑1250 mm and thicknesses from 0.5 mm to 2 mm, and conforms to ASTM A568 or EN 10025 specifications for cold‑rolled steel plates used in packaging and appliance manufacturing.

Trade and Export Information - PRIMA SAL

Lebanon’s polymer packaging sector primarily exports to the Gulf Cooperation Council (GCC) states, the European Union and North‑African markets, where demand for HDPE and LDPE bags aligns with food‑service, retail and municipal waste sectors. HS chapter 39 products such as the listed bags are routinely inspected under the EU’s REACH regulation and may require a CE declaration of conformity for certain commercial applications.

Cold‑rolled steel rolls classified under HS 7209.18 are commonly shipped to manufacturing hubs in the Middle East, Turkey and Southern Europe, where they are further processed into containers, appliance panels or packaging trays. Buyers typically request mill test certificates, chemical composition reports and compliance with ASTM A568 or EN 10025. Standard export logistics involve palletizing the steel coils in 20‑ft or 40‑ft containers, with FOB or CIF terms most frequently used for Lebanese exporters.

Sourcing from PRIMA SAL - Buyer Guidance

When sourcing the HDPE or LDPE bag line, buyers should obtain a material data sheet that lists melt flow index (MFI), density, tensile strength and thickness tolerance. Requesting a sample batch tested for puncture resistance (ASTM D‑6198) and, if the bags will contact food, a compliance certificate for FDA 21 CFR 174 or EU Regulation 1935/2004 is advisable.

For the freezer roll, the buyer should ask for a mill test certificate showing carbon content, tensile strength and surface hardness, as well as verification of the low‑carbon steel grade (typically ≤0.15 % C). Confirm packaging details such as coil wrapping, pallet dimensions and whether the shipment will be made on a 20‑ft or 40‑ft container. Verifying these documents before order confirmation helps ensure the product meets downstream manufacturing specifications.

What types of plastic bags does PRIMA SAL offer?

PRIMA SAL lists standard garbage bags, garbage bags with drawstring, T‑shirt shopping bags, HDPE‑only bags and LDPE‑only bags. All of these are classified under HS 3923.21 except the drawstring version, which uses HS 3923.29.

Which HS codes apply to PRIMA SAL’s bag products?

The HDPE and LDPE bags, including the T‑shirt shopping bags, use HS code 3923.21. The drawstring garbage bags are recorded under HS code 3923.29.

Can PRIMA SAL provide recycled polyethylene material?

The supplier’s profile states that both virgin and recycled materials are available for its HDPE and LDPE bags, allowing buyers to specify recycled content when requesting a quote.

What certifications should a buyer request for the HDPE/LDPE bags?

Buyers should ask for a material data sheet, melt flow index, tensile strength test results and, if the bags are for food contact, a certificate of compliance with FDA 21 CFR 174 or EU Regulation 1935/2004. ISO 9001 certification is commonly requested for overall quality management.

What are the typical dimensions and thickness ranges for the garbage bags?

Garbage bags are typically supplied in widths from 300 mm to 600 mm and lengths up to 1000 mm, with film thicknesses ranging from 20 µm to 120 µm depending on load requirements.

How is the drawstring feature implemented on the drawstring garbage bags?

The drawstring is usually formed by heat‑sealing a narrow tube of the same HDPE or LDPE film and then cutting the tube to create a pull‑string, a method that complies with HS 3923.29 specifications.

What specifications are standard for the freezer roll product?

The freezer roll is a cold‑rolled low‑carbon steel strip classified under HS 7209.18, commonly supplied in widths of 1000‑1250 mm, thicknesses of 0.5‑2 mm, and meeting ASTM A568 or EN 10025 mechanical property requirements.

What packaging and shipping methods does PRIMA SAL use for exports?

Plastic bag orders are usually packed in bulk cartons on wooden pallets, while steel rolls are coil‑wrapped and palletized. Shipments are typically dispatched in 20‑ft or 40‑ft containers under FOB or CIF Incoterms.