About Panjin G-High Carbon Products Co., Ltd. - Petroleum By Products Supplier in China

Based in Panjin, Liaoning Province, China, Panjin G-High Carbon Products Co., Ltd. currently lists five distinct products across its catalogue. The supplier’s active product count of five covers Petroleum By Products, Graphite, Anthracite Coal, Industrial Rods, and Coke categories. Its catalogue includes Graphited petroleum coke, Electrical calcined anthracite, Calcined anthracite coal, Graphite electrode, and Calcined petroleum coke. Each item is classified under the broader commodity families of carbon materials and high‑temperature industrial fuels. The company is recorded as an imported supplier with a harbor trust tier.

Graphited petroleum coke is a high‑carbon feedstock commonly used in steelmaking blast furnaces, while calcined petroleum coke provides a low‑sulfur, high‑density material for aluminum smelting and carbon anode production. Electrical calcined anthracite and calcined anthracite coal are processed forms of anthracite intended for use as refractory fuel and in metallurgical coke substitution. The graphite electrode listed is designed for electric arc furnace applications, where high electrical conductivity and dimensional stability are required. Across the five entries the supplier references standard HS chapters for carbonaceous fuels and electrode products, aligning with typical international customs classifications.

Product Range and Specialties of Panjin G-High Carbon Products Co., Ltd.

Petroleum coke variants are usually graded by volatile matter, sulfur content and ash, with high‑volatile, low‑sulfur grades (e.g., 2‑4 % S, 10‑15 % VM) preferred for metallurgical use. Calcined petroleum coke is further heat‑treated to achieve a fixed carbon content above 96 % and a moisture level below 0.5 %, meeting specifications such as ASTM D 4236 for anode grade. Anthracite products are commonly specified by calorific value (≥7 800 kcal/kg), ash below 5 %, and a bulk density around 1.5 t/m³; calcination reduces volatile matter and improves grindability for refractory applications. Graphite electrodes are typically supplied in standard lengths of 2.5 m to 5 m, with a diameter of 100‑150 mm, a purity of 99.5 % carbon, and a compressive strength exceeding 350 MPa as per IEC 60331. The catalogue’s focus on carbon‑rich materials reflects typical industrial demand for high‑temperature, low‑impurity feedstocks.

Trade and Export Information - Panjin G-High Carbon Products Co., Ltd.

China is a major exporter of carbon materials, and shipments of petroleum coke, calcined coke and anthracite from ports in Liaoning frequently target steel producers in South Korea, Japan and India, as well as aluminum smelters in the Middle East and Europe. Graphite electrodes are similarly shipped to electric arc furnace facilities in the United States, Germany and Brazil, where IEC and ASTM compliance is routinely inspected. Buyers generally request material safety data sheets, third‑party laboratory analysis (e.g., SGS, Bureau Veritas) and conformity certificates such as ISO 9001 or ISO 14001 before contract award. Standard export packaging includes 20 ft or 40 ft containers with bulk bags (25 kg or 50 kg) for coke products, and wooden crates or steel drums for electrode lengths, with moisture barriers to preserve product quality. Common Incoterms used by Chinese carbon material exporters are FOB Tianjin or CIF destination port, depending on buyer preference.

Sourcing from Panjin G-High Carbon Products Co., Ltd. - Buyer Guidance

Prospective buyers should obtain a full proximate analysis (moisture, ash, volatile matter, fixed carbon) and an elemental analysis (sulfur, iron, calcium) for each coke or anthracite batch, and compare the results against the typical grade ranges described above. For graphite electrodes, request a certificate of conformity that includes dimensions, density, electrical resistivity and compressive strength test results, as well as a visual inspection report for surface flaws. Samples are usually supplied in 25 kg bags for coke and 1 m electrode sections, allowing verification of particle size distribution and mechanical properties before full order placement. Minimum order quantities often start at one 20 ft container (≈20 t of coke) or a single pallet of electrodes, with lead times ranging from 30 days for standard grades to 60 days for specialty specifications. Confirm the applicable HS code classification and ensure that any required import permits or environmental certifications are in place for the destination country.

What product categories does the supplier list?

Panjin G-High Carbon Products Co., Ltd. lists five items: Graphited petroleum coke, Electrical calcined anthracite, Calcined anthracite coal, Graphite electrode, and Calcined petroleum coke, covering petroleum by‑products and graphite materials.

Which specifications are typical for the petroleum coke offered?

Buyers usually look for a sulfur content of 2‑4 %, volatile matter of 10‑15 %, fixed carbon above 90 % and a moisture level below 0.5 %; the supplier’s calcined coke is processed to meet ASTM D 4236 anode grade criteria.

How are graphite electrodes packaged for export?

Electrodes are typically packed in wooden crates or steel drums, with individual units protected by foam inserts; a full 20 ft container can hold 12‑15 pallets depending on electrode length.

What documentation should a buyer request before purchasing?

Standard documents include a full laboratory analysis report (proximate and elemental), a material safety data sheet, a third‑party inspection certificate (e.g., SGS), and any applicable ISO quality system certificates.

What are the usual minimum order quantities and lead times?

Minimum orders are generally one 20 ft container (≈20 t) for coke products or a single pallet for electrodes; lead time is about 30 days for standard grades and up to 60 days for customized specifications.

Which markets commonly import these carbon materials?

Major importers are steel and aluminum producers in South Korea, Japan, India, the Middle East, as well as electric‑arc furnace operators in the United States, Germany and Brazil.

Which Incoterms are typically used for shipments from this supplier?

Export shipments are frequently quoted on FOB terms from Tianjin or Dalian ports, and buyers may also negotiate CIF to their destination port.