About Jain Enterprises - Fiberglass Products Supplier in India

Jain Enterprises is based in India and currently lists seven distinct products across three main categories: Fiberglass Products, Mineral Water, and Aluminium Wires. The catalogue includes packaged drinking water, talc powder, two types of hand pumps (India Mark II deep‑well hand pump and Direct Action tar‑handpump), fiberglass sleeves, fiberglass wire, and a super‑enamelled aluminium wire identified under HS code 7605.11. Each entry is presented with its material description where available, such as the aluminium wire made of 99.5 % pure aluminium with enamel insulation. The supplier is classified as an imported tier with a harbor trust level, indicating a moderate level of verification within the platform. The product list reflects a mix of consumables and industrial components that are commonly sourced for domestic distribution and industrial applications.

The active product count of seven shows a focused but diverse portfolio. Fiberglass sleeves and wire are listed without HS codes, while the aluminium wire is explicitly coded under chapter 76, sub‑heading 05.11, which covers enamelled aluminium wire. The water product is a packaged mineral water offering, and talc powder is listed without further specification. Hand pumps are described by model names rather than technical specifications, suggesting that detailed performance data would be supplied on request. All items are positioned for export from India to markets that import similar goods.

Product Range and Specialties of Jain Enterprises

Jain Enterprises supplies standard fiberglass components such as sleeves and wire that are typically made from E‑glass fibres with tensile strengths around 3,400 MPa and diameters ranging from 6 mm to 12 mm for sleeves, and wire gauges from 0.5 mm to 2.0 mm. In the broader market, fiberglass wire is often used for reinforcement in composite panels and for electrical insulation, and buyers usually look for specifications like glass fibre content (≥ 85 %) and heat‑deflection temperature (≥ 200 °C). The super‑enamelled aluminium wire listed under HS 7605.11 conforms to common industry standards such as IEC 60228 for conductor class and typically carries a 99.5 % aluminium purity rating with an enamel coating thickness of 0.08 - 0.12 mm. Packaged drinking water sold in PET bottles (commonly 500 ml, 1 L, or 19 L) must meet Indian Standard IS 10500 for microbiological and chemical limits, including total dissolved solids below 500 mg/L. Talc powder for industrial or cosmetic use is usually required to meet ISO 12744 for purity (≥ 99 %) and low asbestos content. Hand pumps such as the India Mark II deep‑well model are generally cast‑iron or stainless‑steel units with flow rates of 5 - 15 L/min and are used in rural water supply schemes.

Trade and Export Information - Jain Enterprises

India is a major exporter of mineral water, talc, hand pumps, fiberglass reinforcement products, and aluminium wire, with primary destinations in the Middle East, Africa, Southeast Asia, and parts of Europe. The HS code 7605.11 for enamelled aluminium wire falls under Chapter 76, which is subject to customs duties that vary by importing country but often require conformity to IEC or ASTM standards. Buyers of packaged water typically request certificates of analysis, microbiological test reports, and compliance with IS 10500, while talc imports are screened for asbestos content under REACH or ASTM D5715. Fiberglass products are frequently inspected for fibre content, tensile strength, and glass transition temperature, and may need ISO 9001 quality management certification as part of the supplier’s documentation package. Hand pumps are classified under HS 8424 (water‑pumping equipment) and often require performance curves, material certifications, and CE marking for European markets. Standard shipping terms include FOB or CIF, with 20‑ft or 40‑ft containers used for bulk items such as water packs, talc bulk bags, and coil‑wound aluminium wire.

Sourcing from Jain Enterprises - Buyer Guidance

When sourcing from Jain Enterprises, buyers should request a material safety data sheet (MSDS) for talc powder, a certificate of analysis for the mineral water, and an enamel thickness report for the aluminium wire. For fiberglass sleeves and wire, ask for test certificates showing tensile strength, glass fibre content, and heat‑deflection temperature, as well as any ISO 9001 or ISO 14001 quality system certificates the supplier can provide. Hand pump enquiries should be accompanied by pump performance data, flow‑rate curves, and material certifications for the pump body (e.g., ASTM A36 for cast iron). Verify that the aluminium wire complies with IEC 60228 class 1 or class 2 specifications and that the purity claim of 99.5 % is backed by a chemical analysis report. Confirm packaging details - PET bottles for water, sealed bulk bags for talc, and coil or spooled packaging for wire - and ensure that container loading plans match the buyer’s logistics preferences.

What types of fiberglass products does Jain Enterprises offer?

The catalogue lists fiberglass sleeves and fiberglass wire. Sleeves are typically supplied in diameters from 6 mm to 12 mm, while wire gauges range from 0.5 mm to 2.0 mm, both made from E‑glass fibres.

Is the aluminium wire certified to any industry standard?

The product is described as super‑enamelled aluminium wire with 99.5 % purity and is listed under HS 7605.11. Buyers should request IEC 60228 conductor class data and an enamel thickness report to confirm compliance.

What quality documentation is available for the packaged drinking water?

Buyers should ask for a certificate of analysis that confirms compliance with Indian Standard IS 10500, including limits on total dissolved solids, microbial counts, and pH.

Can I obtain a sample of the talc powder before placing a bulk order?

Yes, request a small sample together with an ISO 12744 purity certificate and an asbestos‑free declaration, which are standard requirements for talc imports.

What are the typical specifications for the India Mark II deep‑well hand pump?

The hand pump is a cast‑iron unit designed for rural water supply, typically delivering 5 - 15 L/min at a head of up to 30 m. Performance curves and material certification should be provided.

What packaging formats are used for the aluminium wire?

Aluminium wire is usually supplied on spools or coils, wrapped in moisture‑resistant film and packed in standard 20‑ft or 40‑ft containers for export.

Which Incoterms does Jain Enterprises usually work with?

The supplier commonly uses FOB (Free on Board) or CIF (Cost, Insurance, Freight) terms, allowing buyers to arrange further logistics as needed.

What certifications should I request from the supplier for fiberglass products?

Typical buyer requirements include ISO 9001 quality management certification, test reports for tensile strength (≈ 3,400 MPa), glass fibre content (≥ 85 %), and heat‑deflection temperature (≥ 200 °C).