About Huangshi Better International Trade Co., Ltd - Steel Supplier in China

Located in China, Huangshi Better International Trade Co., Ltd lists 31 active products in its catalogue. The products are all variants of tool steel, covering high‑speed, hot‑work and cold‑work grades such as 1.3247 High Speed Steel, 1.2067 Cold Work Tool Steel, SKD11, M2/1.3343, H11, H13, D2, S7 and many DIN‑specified alloys. Each entry is paired with an HS‑code from Chapter 72, primarily 7228.20, 7228.30, 7228.40, 7224.10 and 7222.20, which are the standard tariff headings for tool steel and related alloy products.

The catalogue concentrates on steel grades that are used for cutting tools, molds, dies and industrial wear parts. Materials are described with their chemical composition ranges, for example SKD11 contains 1.40‑1.60 % C, 11‑13 % Cr, 0.80‑1.20 % Mo and 0.20‑0.50 % V. The list also includes stainless‑type 420/1.2083 martensitic steel and plastic‑mold steel 1.2316 (X36CrMo17). No other product categories beyond steel are specified in the supplied facts.

Product Range and Specialties of Huangshi Better International Trade Co., Ltd

The supplier’s catalogue enumerates a broad spectrum of tool‑steel grades. High‑speed steels such as 1.3247 (M42) and M2/1.3343 provide high hot‑ hardness (typically 62‑66 HRC) and are used for metal‑cutting inserts. Hot‑work steels like H11, H13 and H21 are characterised by excellent thermal fatigue resistance and are common in die‑casting and forging dies. Cold‑work steels - including D2, S7, A2, O2 and SKD11 - offer high wear resistance and are supplied in DIN or AISI designations. Typical industry specifications reference ASTM A681, DIN EN 10084 and ISO 4957 for chemical composition and mechanical properties. Buyers often request certificates confirming compliance with these standards, as well as heat‑treatment reports that document hardness and tempering conditions.

Trade and Export Information - Huangshi Better International Trade Co., Ltd

Chinese tool‑steel exporters normally ship to North America, Western Europe and Southeast Asian manufacturing hubs. The HS‑code families seen in the catalogue (7228.* for tool steel and 7224.* for other alloy steel) are subject to anti‑dumping duties in the EU and the US, so importers usually provide a certificate of origin and a commercial invoice indicating the HS code. Commonly required certifications include ISO 9001 quality‑management systems, ISO 14001 environmental management, and where applicable CE marking for EU market entry. Packaging is typically in wooden crates or steel drums, with 20‑ft containers holding roughly 30‑35 metric tonnes of steel billets or rolled coils, and 40‑ft containers up to 60 tonnes. Standard Incoterms are FOB Shanghai or CIF destination port, depending on buyer preference.

Sourcing from Huangshi Better International Trade Co., Ltd - Buyer Guidance

When sourcing from this supplier, request a full chemical analysis (ICP‑OES) and a hardness test report for the specific grade. Verify that the material complies with the relevant ASTM or DIN standard cited for that grade. Ask for the supplier’s ISO 9001 certificate and a recent third‑party inspection report, such as SGS or Bureau Veritas, to confirm compliance with dimensional tolerances and surface quality. Typical minimum order quantities for bulk steel range from 5 tonnes to 20 tonnes, and lead times are 30‑45 days after order confirmation, allowing time for heat treatment and quality inspection.

What types of tool steel does Huangshi Better International Trade Co., Ltd list?

The catalogue includes high‑speed steels (e.g., 1.3247, M2/1.3343), hot‑work steels (H11, H13, H21), cold‑work steels (D2, S7, A2, O2, SKD11) and martensitic stainless steel 420/1.2083, each identified with its DIN or AISI designation.

Which HS codes are associated with the listed steel products?

Most grades fall under HS 7228 (tool steel), with sub‑headings 7228.20, 7228.30, 7228.40. A few items such as 420/1.2083 are coded 7222.20, and plastic‑mold steel 1.2316 uses 7224.90.

What certifications should a buyer request for these steel grades?

Buyers should request the supplier’s ISO 9001 and ISO 14001 certificates, a material test report (chemical analysis and hardness), and, for EU shipments, a CE conformity declaration or a third‑party inspection certificate.

What is a typical minimum order quantity and lead time?

Bulk orders usually start at 5 tonnes, with larger contracts of 20 tonnes or more. Lead time after order confirmation is generally 30‑45 days to allow for heat treatment and quality verification.

How are the steel products packaged for export?

Products are packed in wooden crates or steel drums, suitable for loading into 20‑ft or 40‑ft containers. A 20‑ft container can carry about 30‑35 tonnes, while a 40‑ft container can hold up to 60 tonnes of steel.

Which markets commonly import Chinese tool steel?

Major import destinations include the United States, Germany, Italy, Japan and South Korea, where the steel is used for cutting tools, molds, dies and wear‑resistant components.