About Hisky International Trading Co., Ltd. - Pipe Valves Supplier in China

China‑based Hisky International Trading Co., Ltd. lists seven active products across three top categories: Pipe Valves, Industrial Valves & Gauges, and Brass Hardware. The catalogue includes a magnetic check valve, a reverse osmosis system, a solenoid valve, a drainage pump, a plunger‑ball valve, a diaphragm solenoid valve, and brass fittings identified with HS code 7412.20. The brass fittings are described as made from Brass Alloy CW614N / CW617N (CuZn39Pb3), a leaded brass commonly used for plumbing connections. The supplier is classified as an imported tier with a harbor trust tier, indicating it operates through Chinese export channels.

The product list combines fluid‑control components and water‑treatment equipment, covering both valve mechanisms and associated hardware. The magnetic check valve and both solenoid‑type valves are typical for automated pipeline systems, while the plunger‑ball valve provides manual shut‑off capability. The drainage pump adds a complementary pumping solution, and the reverse osmosis system addresses water purification needs. Brass fittings provide the necessary connection points for these valve assemblies, completing a functional suite for industrial piping projects.

Product Range and Specialties of Hisky International Trading Co., Ltd.

The catalogue’s valve offerings span magnetic check, solenoid, plunger‑ball and diaphragm‑type designs. In the valve market, magnetic check valves are frequently rated up to 1.0 MPa (150 psi) and operate at temperatures from - 10 °C to 80 °C, often fabricated from stainless steel or brass. Solenoid and diaphragm solenoid valves are commonly supplied with coil voltages of 24 V DC or 110 V AC, pressure ratings of 0.5 - 1.6 MPa, and response times under 0.2 s. Plunger‑ball valves typically feature a full‑port design with a 0.5 mm ball seat and are used for quick‑acting shut‑off in water or oil lines. Brass fittings listed under HS 7412.20 usually conform to DIN 11851 or BS 4293 standards, covering DN15 - DN100 dimensions, thread types (NPT, BSP), and a tolerance of ±0.2 mm. The alloy CW617N contains approximately 3 % lead, providing good machinability and corrosion resistance for hot‑water distribution.

Trade and Export Information - Hisky International Trading Co., Ltd.

China is a leading exporter of industrial valve components and brass fittings, with major destinations in Southeast Asia, the Middle East, and the European Union. Brass fittings under HS 7412.20 fall within Chapter 74, which is subject to customs inspections for material composition and anti‑dumping duties in certain markets. Valve products typically classify under HS 8481 or 8482, and buyers often request ISO 9001 certification, CE marking, and RoHS compliance as part of the pre‑shipment documentation. Standard export packaging includes wooden crates or bulk pallets sized for 20‑ft or 40‑ft containers, with moisture‑resistant liners for brass parts. Common Incoterms used by Chinese valve exporters are FOB Shanghai or CIF Dubai, reflecting the logistics routes for heavy equipment and hardware.

Sourcing from Hisky International Trading Co., Ltd. - Buyer Guidance

When sourcing from Hisky International Trading, request a material test certificate that confirms the brass alloy composition (CuZn39Pb3) and a pressure‑test report for each valve type. Buyers should verify that the supplier can provide CE Declaration of Conformity and ISO 9001 audit reports, as these are typical requirements for industrial valve imports. Samples of the magnetic check valve and brass fittings are advisable to assess sealing performance and dimensional tolerance before confirming bulk orders. Minimum order quantities in the valve segment often start at 500 units per model, while brass fittings may have a MOQ of 1 000 pieces, with typical lead times of 30‑45 days from order confirmation.

What valve types does Hisky International Trading list in its catalogue?

The catalogue includes a magnetic check valve, a solenoid valve, a plunger‑ball valve, and a diaphragm solenoid valve, each used for fluid control in piping systems.

Which material is specified for the brass fittings?

The fittings are described as Brass Alloy CW614N / CW617N (CuZn39Pb3), a leaded brass alloy common for plumbing connections.

What HS code applies to the brass fittings?

The brass fittings are assigned HS code 7412.20, which covers other brass articles such as fittings and pipe connectors.

Are there standard certifications buyers should request for these valves?

Buyers typically request ISO 9001 quality‑management certification, CE marking for safety conformity, and RoHS compliance certificates for valve products.

What are typical pressure ratings for the listed valve models?

Magnetic check and solenoid valves are commonly rated up to 1.0 MPa, while plunger‑ball and diaphragm solenoid valves often handle up to 1.6 MPa, depending on construction material.

What packaging format is used for shipping the brass fittings?

Brass fittings are usually packed in bulk on wooden pallets or in reinforced cardboard boxes, with moisture‑resistant liners to prevent corrosion during transit.

What Incoterms are most frequently used for exporting these products from China?

Exporters from China often use FOB Shanghai for valve shipments and CIF Dubai for bulk hardware, reflecting common logistics routes for industrial equipment.

What sample or testing procedures should a buyer arrange before a large order?

Buyers should obtain a functional test of the valve’s sealing performance and a dimensional inspection of the brass fittings, supported by a material test report confirming alloy composition.