About Nexa energy - Industrial Valves & Gauges Supplier in India

India, specifically Ahmedabad in Gujarat, lists seven active products under Nexa energy. The catalogue spans industrial valve components, pipe fittings and related hardware, reflecting the supplier's focus on valve and flange solutions. Products include Swivel Joints, Hammer Unions, Plug Valve, Api 16 A Clamps, Flanges, Tee & Crosses, Check Valves and a Hydraulically Actuated Gate Valve. Two items carry explicit HS codes: Flanges, Tee & Crosses (HS 7307.93) made from carbon steel, stainless steel 316 or alloy steel, and Check Valves (HS 8481.80) in carbon steel or stainless steel 316. The remaining items are listed without HS codes but fall within standard valve and piping categories.

The product set covers a range of valve and fitting types used in process, water and hydraulic systems. Swivel Joints provide rotational linkage for pipe networks, while Hammer Unions serve as quick‑connect couplings. Plug Valves and Hydraulically Actuated Gate Valves offer shut‑off functions, and Api 16 A Clamps are used for securing pipe sections. Flanges, Tee & Crosses and Check Valves represent standard pressure‑class components that are routinely supplied to industrial projects.

Product Range and Specialties of Nexa energy

Nexa energy’s catalogue includes carbon‑steel and stainless‑steel variants that align with common industry specifications. For flanges, tees and crosses, buyers typically require compliance with ASME B16.5, pressure classes from 150 lb to 2500 lb, and dimensions ranging from DN50 to DN2000. Materials such as carbon steel, stainless steel 316 and alloy steel are standard, with corrosion‑resistant finishes for marine or chemical applications. Check valves are usually supplied to API 6D or ISO 5752 standards, featuring full‑port or reduced‑port designs, pressure ratings up to 250 bar and operating temperatures from - 20 °C to 200 °C. Plug valves and gate valves commonly meet API 6D, with stem diameters from 1 inch to 6 inch and actuation options including manual, pneumatic or hydraulic. Swivel joints and hammer unions are sized by nominal pipe diameter (NPD) and often conform to DIN 2605 or ISO 228‑1 standards.

Trade and Export Information - Nexa energy

India is a major exporter of industrial valve and fitting components, with shipments frequently destined for the Middle East, Southeast Asia, Africa and parts of Europe. The HS‑code 7307.93 for steel flanges, tees and crosses falls under Chapter 73 (articles of iron or steel), while HS‑code 8481.80 for check valves is classified in Chapter 84 (machinery and mechanical appliances). International buyers usually request ISO 9001 quality management certification, and for pressure equipment, API or CE marking is common. Typical export packaging includes wooden crates with internal bracing for flanges, and steel‑reinforced pallets for valve assemblies, allowing safe transport in 20‑ft or 40‑ft containers under FOB or CIF terms. Indian manufacturers often provide mill test reports (MTR) and material certificates to satisfy customs and buyer inspections.

Sourcing from Nexa energy - Buyer Guidance

When sourcing from Nexa energy, request mill test reports that confirm chemical composition and mechanical properties for carbon steel, stainless steel 316 and alloy steel items. Verify compliance with ASME B16.5 for flanges and API 6D for valves, and ask for any applicable CE or ISO certifications that the supplier can furnish. Buyers should confirm the pressure class, temperature range and connection size required for each component, and negotiate sample shipments to validate dimensions and finish before placing larger orders. Typical minimum order quantities range from 50 units for small‑size flanges to 200 kg for valve assemblies, with lead times of 4‑6 weeks for standard grades and longer for custom alloys.

What valve and fitting types does Nexa energy list in its catalogue?

The catalogue includes Swivel Joints, Hammer Unions, Plug Valve, Api 16 A Clamps, Flanges/Tee/Crosses (HS 7307.93), Check Valves (HS 8481.80) and a Hydraulically Actuated Gate Valve.

Which materials are specified for the flanges, tees and crosses?

Materials are carbon steel, stainless steel 316 and alloy steel, matching the typical material grades used for pressure‑class flange families.

What standards should a buyer check for the check valves?

Check valves are commonly required to meet API 6D or ISO 5752 specifications, with pressure ratings up to 250 bar and operating temperature ranges from - 20 °C to 200 °C.

Are HS codes available for all products?

HS codes are provided for Flanges, Tee & Crosses (7307.93) and Check Valves (8481.80). Other items are classified under standard valve and fitting codes in Chapters 84 and 73 but are not listed in the supplier data.

What documentation is typically required before ordering?

Buyers should request mill test reports, material certificates, and any applicable ISO 9001, API or CE compliance certificates to verify product conformity.

What are common packaging methods for these items?

Flanges and fittings are usually packed in wooden crates with internal bracing, while valve assemblies are secured on steel‑reinforced pallets; both are shipped in 20‑ft or 40‑ft containers.

Which regions import these types of industrial valves from India?

Major import regions include the Middle East, Southeast Asia, Africa and selected European markets that source pressure‑class valve and fitting components.

What are typical minimum order quantities and lead times?

Standard items often have MOQ of 50 units for small flanges and 200 kg for valve assemblies, with lead times of 4 - 6 weeks for standard grades and longer for custom alloy specifications.