About Hicrest International Limited - Small Trollies & Related Items Supplier in China

Hicrest International Limited operates out of China and currently offers six distinct products in its catalogue. The listed items fall under the Small Trollies & Related Items and Two Wheelers/Three Wheelers categories. Products include a standard trolley cart, an aluminum trolley cart, a two‑shelf cart, an aluminum hand truck, an aluminum alloy scaffold, and a stainless‑steel caster equipped with a TPR wheel. Each product is identified without specific HS codes in the provided data, but they correspond to typical HS chapter 84 for hand‑carts and chapter 73 for metal castings. The supplier’s trust tier is classified as harbor, indicating a moderate level of verification within trade platforms.

The trolley cart series is generally used for intra‑facility material handling, while the aluminum variants target users seeking corrosion resistance. The two‑shelf cart provides an additional storage tier, often employed in retail or warehouse environments. Aluminum hand trucks are lightweight and typically rated for loads up to 250 kg, suitable for small‑scale logistics. The aluminum alloy scaffold is designed for temporary work platforms, conforming to standard scaffold dimensions and load ratings. Stainless‑steel casters with thermoplastic rubber (TPR) wheels are commonly matched to carts to improve durability on smooth surfaces.

Product Range and Specialties of Hicrest International Limited

The catalogue lists six concrete items: a basic trolley cart, an aluminum‑frame trolley cart, a two‑shelf cart, an aluminum hand truck, an aluminum alloy scaffold, and a stainless‑steel caster with a TPR wheel. In the material handling sector, trolley carts are often fabricated from cold‑rolled steel or aluminium alloy 6061‑T6, offering load capacities from 150 kg to 300 kg, while aluminum hand trucks prioritize a lightweight design of around 5‑7 kg net weight for easy maneuverability. Two‑shelf carts typically feature a load‑bearing deck of 120 mm gauge steel or aluminium, supporting up to 200 kg per shelf, and scaffolds are built to meet EN 12811 standards for temporary structures, using tubular aluminium alloy with a typical height range of 2‑6 m. Stainless‑steel casters are usually made from grade 304 stainless steel and paired with TPR wheels that meet ASTM F2293 for abrasion resistance, providing smooth rolling on polished floors.

Trade and Export Information - Hicrest International Limited

Exporters of material‑handling equipment from China commonly ship to North America, Western Europe and the Middle East, where logistics firms and warehouse operators source durable carts and scaffolds. The relevant HS chapters are 84.71 for handcarts and 73.21 for metal casters, and shipments are often subject to CE marking requirements for the EU and ASTM compliance for the US market. Buyers typically request documentation such as a commercial invoice, packing list, Certificate of Origin and, where applicable, a test report confirming load‑capacity compliance. Containerisation follows standard 20‑ft or 40‑ft containers, with pallets or wooden crates used to prevent deformation of frames during transit, and the supplier’s harbor trust tier suggests that basic due‑diligence documentation is available.

Sourcing from Hicrest International Limited - Buyer Guidance

When sourcing from this supplier, request a detailed product specification sheet that lists material grade, maximum payload, dimensions and finish coating for each cart or scaffold. Ask for third‑party test reports that verify load‑capacity and corrosion‑resistance, especially for aluminium alloy items and stainless‑steel casters. Verify whether the supplier can provide ISO 9001 certification or CE conformity declarations, as these are commonly required by importers of handling equipment. Confirm packaging details - whether items are shipped in bulk pallets, individual crates or protective film - to ensure they meet your logistical handling and warehouse storage standards.

What product types does Hicrest International Limited supply?

The supplier lists a trolley cart, an aluminum trolley cart, a two‑shelf cart, an aluminum hand truck, an aluminum alloy scaffold and a stainless‑steel caster with a TPR wheel. Each item is presented as a separate SKU in the catalogue.

Which HS chapters normally cover these items?

Trolley carts and hand trucks are typically classified under HS chapter 84 (machinery for handling goods). Stainless‑steel casters fall under chapter 73 (articles of iron or steel). The catalogue does not provide specific HS codes, but these chapters are standard for the product types.

What material standards are typical for the aluminium products?

Buyers often require aluminium alloys such as 6061‑T6 or 6082‑T6, which comply with ASTM B221 for extruded profiles. These grades provide a balance of strength and corrosion resistance suitable for carts and scaffolds.

What load capacities should be verified for the hand truck and trolley carts?

Standard hand trucks and trolley carts are commonly rated for payloads between 150 kg and 300 kg. The supplier’s technical data sheet should state the exact capacity for each model.

Which certifications are commonly required for metal handling equipment?

International purchasers usually ask for ISO 9001 quality‑management certification, CE marking for EU entry, and compliance with ASTM or EN load‑testing standards. Such documents confirm that the products meet recognised safety and performance criteria.

What packaging and shipping formats are typical for these goods?

Equipment is generally packed in export‑grade wooden crates or bulk pallets, with dimensions arranged to fit 20‑ft or 40‑ft containers. Casters may be wrapped in protective film to avoid surface damage during transit.

What are typical minimum order quantities and lead times?

For small‑scale handling equipment, suppliers often set MOQs of 50‑100 units per item. Lead times usually range from 15 to 30 days after order confirmation, depending on production scheduling and export documentation.