About Pooja Meena - Petroleum Products and Metals Supplier in India

Pooja Meena is an exporter based in Jaipur, Rajasthan, India, listing 10 active products across petroleum derivatives, fertilizers, precious metals, industrial minerals, and personal protective equipment. The catalogue spans HS code families 2710 (petroleum oils other than crude), 2701 (coal), 2713 (petroleum coke), 6807 (bituminous mixtures), 3102 (nitrogenous fertilizers), and 7108 (gold). The petroleum segment covers aviation turbine fuel (Jet A1), ULSD diesel (En590), residual fuel oil (Mazut M100, sulfur ≤ 3.5%), heavy fuel oil (D6), bitumen penetration grade 60/70, and gasoline RON 91, while the non-petroleum line includes Urea 46% N, anthracite coal, petroleum coke, gold (24K/22K), and N99/KN99/FFP3 masks. The supplier's listing sits across two distinct trade lanes: bulk hydrocarbon exports under HS chapter 27 and dry-bulk or precious-metal shipments under chapters 31, 68, and 71. Indian exports of refined petroleum products, urea, and bitumen typically flow to South and Southeast Asia, the Middle East, and Africa, while gold and anthracite coal are more often routed through specialised commodity channels. Buyers reviewing this catalogue should note that the same supplier is offering finished refinery products, a nitrogen fertilizer, a precious metal, and respiratory protective equipment, which means each line should be evaluated against its own technical specification, regulatory regime, and shipping requirement rather than as a single homogeneous offering.

Product Range and Specialties of Pooja Meena

The 10-item catalogue groups into four practical clusters. The refined fuels cluster covers Jet A1 (HS 2710.19), En590 ULSD diesel (HS 2710.19), D6 heavy fuel oil (HS 2710.19), Mazut M100 residual fuel oil with sulfur ≤ 3.5% (HS 2710.19), and Gasoline RON 91 (HS 2710.12). For these, typical buyer specifications include sulfur content in ppm, flash point, kinematic viscosity at 40°C or 50°C, density at 15°C in kg/m³, cetane index for diesel, smoke point and freeze point for Jet A1, and RON/MON octane values for gasoline; En590 in the European market is commonly referenced to EN 590 with 10 ppm sulfur. The solid hydrocarbons and bitumen cluster covers Petroleum Coke (HS 2713.12), Anthracite Coal (HS 2701.11), and Bitumen 60/70 penetration grade (HS 6807.10). Petroleum coke is graded by sulfur content (fuel-grade vs anode-grade), volatile matter, and Hardgrove Grindability Index; anthracite coal is graded by fixed carbon (typically 85-92%+, ash ≤ 12%, volatile matter ≤ 10%), calorific value in kcal/kg or GAR/NAR basis, and size fraction (0-6 mm, 6-25 mm, 25-50 mm); bitumen 60/70 refers to penetration in 1/10 mm at 25°C, with a softening point typically 49-56°C and flash point ≥ 230°C. The fertilizer line is Urea 46% N (HS 3102.10), a prilled or granular nitrogen fertilizer with 46% minimum nitrogen, 1.0% maximum biuret, and moisture ≤ 1.0%. The remaining items are Gold Au 99.99% (24K) and Au 91.6% (22K) under HS 7108.12, and N99/KN99/FFP3 respiratory masks.

Trade and Export Information - Pooja Meena

Refined petroleum products exported from India are typically shipped under HS chapters 2710, 2711, and 2713 and move in ISO tank containers, flexitanks, or sea-river vessels of 1,000-5,000 MT for fuel oils and 5,000-30,000 MT parcel sizes for clean products. Indian refiners and re-exporters commonly serve buyers in West Africa (Lagos, Tema, Lomé), East Africa (Mombasa, Dar es Salaam), the UAE (Fujairah, Jebel Ali), Singapore, and Bangladesh; Mazut M100 and D6 are particularly associated with power generation and marine bunker demand in Africa and the Middle East. Bitumen 60/70 is typically supplied in 150-200 kg new steel drums, 1 MT jumbo bags, or bulk heated tankers, with the road construction sector in South Asia, the Middle East, and East Africa as the main end market. For the non-petroleum lines, Indian Urea 46% N exports typically move in 50 kg bags, 1 MT jumbo bags, or bulk vessels of 5,000-25,000 MT, with buyers in Bangladesh, Nepal, Sri Lanka, and parts of Africa; HS 3102.10 goods in many destination markets require an import licence or tender allocation. Anthracite coal (HS 2701.11) is shipped in bulk carriers of 5,000-50,000 MT and is graded on a GAR or NAR calorific basis (typically 6,000-7,500 kcal/kg) with size and ash specifications. Petroleum coke (HS 2713.12) is exported in bulk or 1 MT bags, with sulfur content and HGI driving the end use (cement, calcined anode, or power). Gold under HS 7108.12 is a high-value, regulated shipment requiring chain-of-custody documentation, hallmarking, and compliance with destination-country precious-metal import rules, including potential customs duty and anti-money-laundering checks. Across all petroleum lines, buyers should expect Incoterms such as FOB, CFR, or CIF, with payment typically by irrevocable L/C at sight or SBLC, and should verify SGS or Intertek inspection at load port.

Sourcing from Pooja Meena - Buyer Guidance

Buyers sourcing from this supplier should treat each product line independently and request the underlying technical data sheet before issuing any purchase order. For Jet A1, request the latest refinery quality certificate covering flash point, freeze point, smoke point, and a JIG or equivalent audit history; for En590, request EN 590 compliance and sulfur ≤ 10 ppm; for Mazut M100 and D6, request sulfur %, viscosity at 50°C, density at 15°C, flash point, water and sediment, and an SGS or Intertek certificate of quality at load port. For Urea 46% N, request nitrogen content, biuret, moisture, granulometry, and a pre-shipment analysis certificate. For anthracite coal and petroleum coke, ask for proximate and ultimate analyses (ash, volatile matter, fixed carbon, sulfur, calorific value in kcal/kg, HGI for petcoke) on a lot-representative basis, plus size distribution and a third-party SGS, CCIC, or equivalent certificate. For bitumen 60/70, request penetration at 25°C, softening point (ring and ball), ductility, solubility in trichloroethylene, and flash point. For gold, request LBMA good-delivery chain documentation, refinery assay, and confirmation of hallmarking; expect KYC and AML checks. For N99/KN99/FFP3 masks, request EN 149:2001 + A1:2009 test reports (FFP3 grade), CE or NIOSH certification, and lot-level filtration efficiency data. Across all lines, confirm the supplier's IEC code, AD code registration with the Indian customs, and the exact shipping terms, parcel size, and load port before contracting.

What is the active product count and origin of Pooja Meena?

The supplier lists 10 active products and is registered in Jaipur, Rajasthan, India. The catalogue spans refined petroleum products, fertilizers, coal, petroleum coke, bitumen, gold, and respiratory masks, so each line should be evaluated against its own HS code and specification.

Which HS code families apply to the petroleum products listed?

Jet A1, En590, D6, and Mazut M100 are declared under HS 2710.19, Gasoline RON 91 under HS 2710.12, Petroleum Coke under HS 2713.12, and Bitumen 60/70 under HS 6807.10. These are the standard HS code families for refined oils, residual fuel oils, petroleum coke, and bituminous mixtures.

What specification should be requested for Mazut M100 and D6 heavy fuel oil?

Buyers should request sulfur content (typically ≤ 3.5% for M100), kinematic viscosity at 50°C, density at 15°C in kg/m³, flash point, pour point, water and sediment, ash, and calorific value. A pre-shipment SGS or Intertek certificate of quality at load port is the standard verification document for these grades.

What documents are typically required for Urea 46% N exports from India?

Urea 46% N (HS 3102.10) is usually shipped with a pre-shipment analysis certificate covering nitrogen (≥ 46%), biuret (≤ 1.0%), moisture (≤ 1.0%), and granulometry, plus a commercial invoice, packing list, bill of lading, and a certificate of origin. Many destinations require an import licence or tender allocation, which should be confirmed by the buyer before contracting.

Which grades and parameters matter for the anthracite coal and petroleum coke listed?

Anthracite coal (HS 2701.11) is graded on fixed carbon (typically 85-92%+), ash (≤ 12%), volatile matter (≤ 10%), calorific value in kcal/kg on a GAR or NAR basis, and size fraction. Petroleum coke (HS 2713.12) is graded on sulfur (fuel-grade vs anode-grade), volatile matter, and Hardgrove Grindability Index, with cement, calcined anode, and power generation as the typical end uses.

What is the typical packaging and shipment format for bitumen 60/70?

Bitumen penetration grade 60/70 (HS 6807.10) is commonly packed in 150-200 kg new steel drums, 1 MT jumbo bags with inner liners, or shipped in bulk heated tankers. Penetration at 25°C, softening point (ring and ball, typically 49-56°C), ductility, and flash point (≥ 230°C) are the standard parameters to verify on the certificate of quality.

Which certifications should be requested for the N99/KN99/FFP3 masks?

FFP3-grade respirators should be supplied with EN 149:2001 + A1:2009 test reports, CE or NIOSH certification, and lot-level filtration efficiency and breathing resistance data. Buyers should also request the manufacturer's declaration of conformity and a production batch number traceable to the certificate.

What are the typical Incoterms, payment terms, and lead-time considerations for these product lines?

Refined petroleum products and bulk commodities from India are commonly quoted on FOB, CFR, or CIF Incoterms with payment by irrevocable L/C at sight or SBLC, and parcel sizes of 1,000-30,000 MT depending on the grade. Lead time is driven by vessel nomination, SGS or Intertek inspection at load port, and any destination-side import licence; buyers should confirm these details and the exact load port before issuing any purchase order.