About Hebei Chuangye Metal Wire Mesh Co., Ltd - Wire Mesh Supplier in China

China based Hebei Chuangye Metal Wire Mesh Co., Ltd currently lists six active products in its catalogue. All items fall under the wire mesh category and include galvanized welded wire mesh, PVC welded wire mesh, chain link fence, razor wire mesh, welded wire mesh, and stainless steel wire mesh. The catalogue does not provide individual HS codes, but the products are classified under the broader HS heading for metal wire products. The supplier is listed as an imported tier with a harbor trust rating. Each product type is described by its material and coating rather than detailed dimensions.

The galvanized welded wire mesh is supplied with a zinc coating applied by hot‑dip galvanizing. PVC welded wire mesh features a continuous PVC sheath that improves weather resistance. Chain link fence and razor wire mesh are offered in standard bar diameters used for security applications. Welded wire mesh without coating is typically sold as plain steel, while stainless steel wire mesh is offered in common grades such as 304 and 316. These six listings represent the full active product set reported for the supplier.

Product Range and Specialties of Hebei Chuangye Metal Wire Mesh Co., Ltd

The catalogue covers five distinct wire mesh variants: galvanized, PVC‑coated, plain welded, chain link, razor and stainless steel. In the metal mesh industry, galvanized products commonly meet ASTM A123 or ISO 1461 standards, with zinc coating weights ranging from 275 to 350 g/m². PVC‑coated meshes are usually produced with PVC thickness between 0.5 mm and 1.5 mm to achieve UV resistance. Stainless steel meshes are typically fabricated from grade 304 (18‑8) or grade 316 (marine grade) and may be passivated for enhanced corrosion protection. Chain link fences are supplied in mesh openings from 25 mm to 75 mm, while razor wire often uses bar diameters of 2 mm to 3 mm with sharp bar edges for security use. Buyers usually specify wire diameter, mesh opening, tensile strength (often 300 - 600 MPa for steel) and coating thickness when selecting a product.

Trade and Export Information - Hebei Chuangye Metal Wire Mesh Co., Ltd

China is a major exporter of metal wire products, and wire mesh items are generally classified under HS Chapter 73, sub‑heading 7315 for woven or welded wire mesh. Major import markets for Chinese wire mesh include the United States, the European Union, the Middle East and Southeast Asia, where construction, agriculture and security sectors are the primary end‑users. Typical certifications requested by overseas buyers are ISO 9001 quality management, CE conformity for EU shipments, and compliance with ASTM or ISO standards relevant to the specific mesh type. Export shipments are usually packed on wooden pallets, with 20‑ft containers holding approximately 15 tonnes of mesh, and 40‑ft containers up to 30 tonnes, depending on coil or flat roll dimensions. Common Incoterms are FOB Shanghai or CFS Ningbo, allowing buyers to arrange onward freight and customs clearance.

Sourcing from Hebei Chuangye Metal Wire Mesh Co., Ltd - Buyer Guidance

When sourcing wire mesh from this supplier, buyers should request a product data sheet that lists wire diameter, mesh opening size, coating weight (for galvanized or PVC variants) and tensile strength. Samples should be examined for coating uniformity, edge quality and dimensional accuracy; a galvanised sample can be verified with a zinc thickness gauge. Buyers are advised to ask for third‑party test reports such as ASTM A123 compliance certificates, ISO 9001 audit reports, and, for stainless steel, certification of grade 304 or 316 according to EN 10088. Verifying the HS code used in the commercial invoice (typically 7315) helps ensure correct duty treatment at import.

What wire mesh variants are listed by Hebei Chuangye Metal Wire Mesh Co., Ltd?

The supplier lists galvanized welded wire mesh, PVC welded wire mesh, chain link fence, razor wire mesh, plain welded wire mesh and stainless steel wire mesh.

Which HS code family does the supplier’s wire mesh fall under?

Wire mesh products from China are generally classified under HS Chapter 73, sub‑heading 7315 for welded or woven metal wire mesh.

What standard coating thickness is typical for the galvanized mesh offered?

Galvanized mesh commonly carries a zinc coating weight between 275 g/m² and 350 g/m², meeting ASTM A123 or ISO 1461 requirements.

What stainless steel grades are normally used for the stainless steel wire mesh?

Buyers usually encounter grades 304 (18‑8) and 316 (marine grade) for stainless steel mesh, both complying with EN 10088 specifications.

Which certifications should a buyer request before purchasing?

Typical requests include ISO 9001 quality management certification, ASTM compliance certificates for galvanized mesh, and CE declaration for EU shipments.

What packaging format is standard for shipping these mesh products?

Meshes are normally coiled or flat‑rolled, packed on wooden pallets, and loaded into 20‑ft or 40‑ft containers depending on volume.

What are common end‑use industries for these wire mesh products?

Construction fencing, agricultural grain protection, security fencing and industrial filtration are common applications for the listed mesh types.

What documentation is needed for customs clearance of the mesh?

A commercial invoice showing the correct HS code (7315), a packing list, certificate of origin and any required test reports or conformity certificates are typically required.