About Golden Faith Glass& Mirror Industrial Co Ltd - Glass & Glass Products Supplier in China

Golden Faith Glass& Mirror Industrial Co Ltd operates from China and lists six active glass products in its catalogue. The listed items fall under the top categories of Float Glass, Reflective Glass and Glass & Glass Products, and the catalogue includes Clear float glass, Ultra clear glass, Colour glass bronze float glass, Reflective glass, Low‑e glass and Silver mirror. Each product is identified by its generic name without additional technical codes, indicating a focus on standard flat‑glass applications. The supplier is classified as an imported tier with a harbor trust tier, which signals a basic level of verification within trade platforms.

The product portfolio covers both standard and specialty flat glass. Clear float glass refers to the basic annealed sheet used in construction and automotive glazing. Ultra clear glass is a low‑iron variant that typically achieves optical transmission above 90 %. Colour glass bronze provides a tinted finish used for decorative façades. Reflective glass incorporates a metallic coating that yields a reflectance of 30 % - 70 % on one side, while Low‑e glass adds an energy‑saving coating to reduce heat transfer. Silver mirror is a highly reflective silver‑coated sheet used for decorative and optical purposes.

Product Range and Specialties of Golden Faith Glass& Mirror Industrial Co Ltd

The catalogue’s six entries map directly onto common flat‑glass grades. In the industry, clear float glass is supplied in thicknesses from 3 mm to 12 mm and conforms to standards such as EN 572 or ASTM C1036. Ultra clear glass is distinguished by an iron content below 0.1 % Fe₂O₃, delivering higher visible light transmission and is often classified as “IC 74” or “IC 78” in optical grading. Bronze‑tinted float glass is produced with pigment loadings that give a uniform hue, typically measured by a color coordinate (L*a*b*) in the range of L* ≈ 30 - 40. Reflective glass employs a thin metallic layer; buyers usually request reflectance data at 550 nm and a surface hardness rating of at least 3 Mohs. Low‑e glass incorporates a microscopically thin coating that can achieve a U‑value reduction of 0.3 - 0.5 W/m²·K, and specifications often cite a solar heat gain coefficient (SHGC) between 0.25 and 0.45. Silver mirror sheets are supplied in thicknesses around 0.2 mm and are evaluated for specular reflectance above 85 % across the visible spectrum.

Trade and Export Information - Golden Faith Glass& Mirror Industrial Co Ltd

China is one of the world’s largest exporters of flat glass, and shipments from the country regularly serve construction, automotive and solar‑panel markets in the European Union, the United States and the Middle East. Flat‑glass products fall under HS Chapter 70, and customs authorities commonly inspect for correct tariff classification, weight declarations and compliance with safety standards such as CE marking for EU destinations. Buyers typically request certificates like ISO 9001 for quality management, and where applicable, compliance with ASTM or EN standards for dimensional tolerance and impact resistance. Export logistics for 6 mm - 12 mm sheets usually involve 20‑ft or 40‑ft containers stacked on wooden pallets with edge protection, and the goods are shipped under Incoterms FOB or CIF depending on the buyer’s preference.

Sourcing from Golden Faith Glass& Mirror Industrial Co Ltd - Buyer Guidance

When sourcing from this supplier, buyers should obtain a mill test report that details thickness tolerance (±0.2 mm for most sheets), optical transmission, reflectance and coating durability. Requesting a sample of the specific glass grade - preferably a 1 m² piece - allows verification of visual appearance, edge quality and surface flatness before committing to a full container. Verify that the supplier can provide the required certifications (e.g., ISO 9001, CE conformity) and that the packaging meets the buyer’s destination’s handling standards; pallets should be wrapped and the glass sheets protected with edge guards to prevent breakage during transit.

What types of flat glass does Golden Faith list in its catalogue?

The catalogue includes Clear float glass, Ultra clear low‑iron glass, Bronze‑tinted colour glass, Reflective glass with a metallic coating, Low‑e energy‑saving glass and Silver mirror sheet.

Which standards are typically applied to the clear float glass offered?

Clear float glass normally conforms to EN 572 or ASTM C1036, which define thickness ranges, flatness tolerances and mechanical strength for annealed sheets.

How can I verify the optical quality of the Ultra clear glass?

Request an optical transmission report that shows visible light transmission above 90 % and an iron content below 0.1 % Fe₂O₃; a sample panel can also be measured for haze and clarity.

What documentation should I ask for before placing an order?

Ask for a mill test report, any relevant ISO certificates (e.g., ISO 9001), CE conformity statements for EU shipments, and coating performance data for reflective or Low‑e glass.

What are typical minimum order quantities and lead times for these glass products?

Buyers usually order by container load, which translates to roughly 10 - 12 tons of flat glass per 40‑ft container; lead times are commonly 30 - 45 days from order confirmation, depending on coating complexity.

How are the glass sheets packaged for export?

Sheets are stacked on wooden pallets with edge guards, wrapped in protective film and secured with strapping to minimise breakage during handling and sea transport.