About Chinasky Electronics Co., Ltd. - CCTV & Accessories Supplier in China

Chinasky Electronics Co., Ltd. is based in China and currently lists ten active products on the platform. The catalogue is organized under three primary categories: CCTV & Accessories, Wires & Cables, and Electric Connectors. The supplier’s product set includes power connectors, camera testers, BNC connectors, power splitters, regulated adapters, ground‑loop isolators, microphones and UTP baluns. Each item falls within the standard HS code families for electronic connectors (HS 8544) and cable assemblies (HS 8544.70 or HS 8544.50). The company is classified as an imported supplier with a harbor trust tier.

The product list comprises a 2.1 × 5.5 mm male DC power connector for CCTV cameras, a 4.3‑inch wrist‑mounted AHD and analog camera tester, a combinable CCTV unit, a female DC power plug, a crimp‑type male BNC connector for coaxial cable, a 20 AWG two‑way power cable splitter, a CE‑approved regulated power adapter, a video ground‑loop isolator, a low‑noise pick‑up microphone, and a 1‑channel UTP passive power‑and‑video balun (PV22). All items are described using the exact product titles supplied in the catalogue.

Product Range and Specialties of Chinasky Electronics Co., Ltd.

The CCTV & Accessories category covers power delivery components, signal conditioning devices and test equipment that are standard in surveillance system builds. Power connectors such as the 2.1 mm barrel type are typically rated for 12 V DC at 2 A and conform to IEC 60950 safety requirements; the female DC plug mirrors these specifications for reverse polarity protection. BNC connectors used for video transmission generally have a 50 Ω impedance, gold‑plated pins and a shielding rating of at least 30 dB, matching the IEC 61156‑1 standard. The 1‑channel UTP balun (PV22) converts 75 Ω video to 100 Ω Ethernet, a common practice for long‑run installations, and is usually supplied in a molded housing that meets RoHS limits. In the Wires & Cables segment, the 20 AWG two‑way power splitter is a PVC‑jacketed, low‑smoke cable designed for 12 V DC distribution to multiple cameras. Typical specifications for similar CCTV power cables include a voltage rating of 300 V, current capacity of 5 A per conductor and a tensile strength of 30 MPa. Electric connectors listed, such as the crimp male BNC and the regulated power adapter, follow CE marking directives and often carry UL or FCC test reports when exported to North America or Europe. Buyers usually expect material data sheets, temperature operating ranges (‑20 °C to +70 °C) and compliance certificates for these items.

Trade and Export Information - Chinasky Electronics Co., Ltd.

China is a global exporter of CCTV accessories, with the majority of shipments destined for North America, the European Union, the Middle East and Southeast Asian markets. HS chapter 85 (electrical machinery and equipment) covers the listed items, specifically HS 8544 for connectors and HS 8544.70 for cable assemblies. Importers commonly require CE marking for the EU, FCC certification for the United States, and RoHS compliance for both regions. Shipping is typically arranged in 20‑foot or 40‑foot containers, with each connector or cable unit packed in anti‑static poly bags and placed in corrugated boxes to protect against moisture and mechanical shock. The supplier’s “harbor” trust tier indicates that customs clearance procedures are standard, but buyers should verify that the commercial invoice lists accurate HS codes and country of origin for duty assessment. Export logistics from China often involve freight forwarders handling consolidation at major ports such as Shanghai or Shenzhen. Buyers frequently request pre‑shipment inspection reports (PSI) conducted by third‑party agencies to confirm that the products meet the declared specifications and certifications. For regulated power adapters, an IEC 60950 test report and a CE Declaration of Conformity are typical documentation requirements before the goods can clear customs in the destination market.

Sourcing from Chinasky Electronics Co., Ltd. - Buyer Guidance

When sourcing from Chinasky Electronics, buyers should request product data sheets that detail voltage rating, current capacity, connector dimensions and material composition. For the power connectors and adapters, a CE Declaration of Conformity and, where applicable, an FCC test report should be obtained to ensure compliance with European or US regulations. The BNC connector and balun should be accompanied by an IEC 61156‑1 test certificate confirming impedance and shielding performance. Buyers are advised to verify the packaging specifications - for example, whether the items are supplied in anti‑static bags, the number of units per carton, and the gross weight per container - to calculate freight costs accurately. Typical minimum order quantities for these small‑format electronic components range from 500 to 1,000 pieces per SKU, with lead times of 15‑30 days after order confirmation, depending on production scheduling and export clearance procedures.

What HS codes apply to the CCTV power connectors and adapters listed by Chinasky Electronics?

The power connectors and adapters fall under HS chapter 85, most commonly HS 8544 for electric connectors and HS 8544.70 for cable assemblies. Buyers should confirm the exact sub‑heading with the supplier before customs filing.

Which certifications are usually required for the CE‑approved regulated power adapter?

Buyers should request the CE Declaration of Conformity, an IEC 60950 safety test report, and a RoHS compliance statement. Additional FCC or UL certification may be needed for shipments to the United States.

What are the typical technical specifications for the 2.1 × 5.5 mm CCTV male DC power connector?

The connector is generally rated for 12 V DC at up to 2 A, uses a barrel diameter of 2.1 mm, and complies with IEC 60950 safety standards. It is usually made of nickel‑plated brass with a PVC insulated housing.

How is the 20 AWG 2‑way CCTV power cable splitter packaged for export?

Export packs commonly consist of the cable cut to length, coiled and placed in anti‑static poly bags, then boxed in corrugated cartons. Carton dimensions and gross weight are provided for freight calculations.

What testing is standard for the Crimp Male CCTV BNC Connector for coaxial cable?

Standard tests include impedance verification at 50 Ω, insertion loss measurement, and a shielding effectiveness test of at least 30 dB, documented in an IEC 61156‑1 test report.

Which documents should a buyer request before placing a bulk order for the 1CH CCTV UTP passive power & video balun (PV22)?

Buyers should obtain a product data sheet, RoHS compliance certificate, CE Declaration of Conformity and, if required by the destination market, an FCC or CE test report confirming the balun’s frequency range and loss characteristics.

What are typical lead times and MOQ for the low‑noise CCTV camera pick‑up microphone?

Lead times are usually 15‑30 days after order confirmation, and minimum order quantities range from 500 to 1,000 units depending on packaging and freight consolidation options.

Are pre‑shipment inspections mandatory for these electronic components?

While not mandatory, many importers request a third‑party pre‑shipment inspection (PSI) to verify compliance with specifications, certifications and packaging before the goods leave the Chinese export port.