About Britx Wire Rope Ind. Corp. - Steel Wires Supplier in Taiwan

Britx Wire Rope Ind. Corp. is based in Taiwan and currently lists five distinct steel wire products in its catalogue. The catalogue falls under the top category of Steel Wires and includes carbon spring wire, music wire, hose wire, oil tempered wire and rope wire. Two of the items, music wire and hose wire, are classified under HS code 7217.10, which covers steel wire rods and other steel wire products. Rope wire is recorded with HS code 7217.20, the heading for steel wire ropes. All items are described by their steel composition, ranging from high‑carbon grades to low‑carbon variants.

The music wire entry specifies a high carbon steel composition of 0.8 % - 1.0 % carbon, identified as SWP‑A grade. Hose wire is listed as high carbon steel wire rod SWRH 62A‑72A. Oil tempered wire is defined by carbon 0.60 %‑0.95 %, manganese 0.30 %‑1.00 % and silicon 0.10 %‑0.35 %. Rope wire combines high carbon and low carbon steel materials. Carbon spring wire is included without an HS code but is part of the same steel wire family.

Product Range and Specialties of Britx Wire Rope Ind. Corp.

The product range comprises five steel wire types. Carbon spring wire is used for spring applications where elasticity and fatigue resistance are required. Music wire, commonly supplied to precision instrument makers and automotive springs, is a high carbon steel that aligns with ASTM A228 or A229 specifications. Hose wire is a high carbon steel wire rod, typically meeting IEC 1151 requirements for strength and flexibility. Oil tempered wire is heat‑treated to improve tensile strength and is often specified for automotive and machinery components. Rope wire, listed under HS 7217.20, is produced for lifting and rigging applications and can be manufactured from either high carbon or low carbon steel to meet different load classes.

In the global steel wire market, HS code 7217.10 products are frequently required to achieve tensile strengths of 1800 - 2500 MPa for music wire and 1500 - 2000 MPa for hose wire, with surface hardness measured on the Rockwell C scale between 45 and 55. Rope wire under HS 7217.20 is typically classified to IEC 60228 class 5 or 6, with minimum breaking strength expressed in kilonewtons per millimetre squared. Buyers usually request mill test certificates that detail carbon content, tensile strength, elongation and heat‑treatment records. Common certifications sought for these steel products include ISO 9001 quality management and compliance with ASTM or EN standards relevant to the specific wire grade.

Trade and Export Information - Britx Wire Rope Ind. Corp.

Taiwan is a recognized exporter of specialty steel wire products, and shipments of HS 7217.10 and 7217.20 goods are regularly directed to East Asia, North America and the European Union. Importers in the automotive, construction and precision equipment sectors typically require compliance with local standards such as ASTM, EN or ISO, and may request third‑party inspection reports before acceptance.

Standard export packaging for steel wires includes moisture‑resistant bundles wrapped in polypropylene film, placed in wooden crates or bulk bags for larger volumes. Container loading commonly uses 20‑foot or 40‑foot containers with weight limits of up to 22 tonnes, and Incoterms such as FOB or CIF are frequently applied. Taiwanese exporters often work with freight forwarders familiar with customs procedures for HS 7217 headings, including mandatory phytosanitary or material safety data sheet submissions where required.

Sourcing from Britx Wire Rope Ind. Corp. - Buyer Guidance

Buyers should obtain a mill test certificate that confirms the exact chemical composition, tensile strength, elongation and heat‑treatment parameters for each wire type. For music wire and hose wire, requesting a Rockwell hardness test report and a surface finish inspection can verify compliance with typical industry grades.

Samples of the wire are usually supplied in lengths of 1 m to 5 m, coiled in protective film. Prior to placing a bulk order, buyers are advised to verify that the supplier can provide ISO 9001 certification or equivalent quality system documentation, and that the steel complies with the relevant ASTM or EN standard cited in the purchase specification. Lead times for the five listed products typically range from 30 to 60 days, depending on the heat‑treatment process and quantity ordered.

What HS codes apply to the wire products offered by Britx Wire Rope Ind. Corp.?

Music wire, hose wire and oil tempered wire are listed under HS code 7217.10, while rope wire falls under HS code 7217.20. Carbon spring wire is a steel wire product but no HS code is provided in the catalogue.

Which material specifications are indicated for the music wire?

The music wire is described as high carbon steel with a carbon range of 0.8 % - 1.0 % and is identified as SWP‑A grade. This aligns with typical ASTM A228 high‑carbon music wire specifications.

What typical certifications should a buyer request for these steel wires?

Buyers usually ask for an ISO 9001 quality management certificate, a mill test certificate, and compliance documents referencing ASTM or EN standards relevant to the specific wire grade.

How is rope wire differentiated from the other products?

Rope wire is categorized under HS 7217.20 and can be manufactured from either high carbon or low carbon steel, allowing it to meet load class requirements for lifting or rigging applications.

What are common packaging methods for the wire products?

Standard packaging includes moisture‑resistant polypropylene film wrapping, placed in wooden crates or bulk bags. For container shipments, 20‑foot or 40‑foot containers are used with weight limits up to 22 tonnes.

What documentation is advisable before placing a bulk order?

In addition to the mill test certificate, buyers should request heat‑treatment records, surface hardness test results and, where applicable, third‑party inspection certificates to verify compliance with the required tensile strength and material composition.

Which markets typically import steel wires from Taiwan?

Typical import markets include the United States, the European Union and neighboring East Asian countries, where the wires are used in automotive, construction and precision equipment industries.

What lead time can a buyer expect for these products?

Lead times generally range from 30 to 60 days, depending on the specific wire type, required heat treatment and order volume.