About Baoji Minghai Titanium Industry Co., Ltd. - Titanium Products Supplier in China

Baoji Minghai Titanium Industry Co., Ltd. is based in China and currently lists six active products in its catalogue. The catalogue is split between general fastener types such as nuts and a set of titanium‑based components that include a mushroom‑head screw, flat washer, racing lug bolt, taper hex socket bolt, and two nail formats. Two of the items carry explicit HS codes: the Titanium Nails 14/18 mm Male Joints are recorded under HS code 9614.00 and are made from Pure Titanium Grade 2, while the Universal 6‑in‑1 Titanium Domeless Nail is listed under HS code 8108.90 with a composition of Ti 99.2 % and trace elements of Fe, O, C, N, and H. The remaining four products are described by type only, without HS‑code or material detail in the supplied data.

The six products fall under the broader categories of “Nuts” and “Titanium Products” as indicated in the supplier’s top categories. All items are identified as titanium fasteners, a material class commonly used for high‑strength, corrosion‑resistant applications in aerospace, automotive, and industrial equipment. The catalogue does not state any certifications held by the supplier; therefore, buyers should verify conformity to relevant standards such as ASTM B348 for Grade 2 titanium or ISO 9001 quality management where required.

Product Range and Specialties of Baoji Minghai Titanium Industry Co., Ltd.

The listed catalogue comprises two fastener sub‑categories: bolts/screws and nails/washers. The Titanium Mushroom Head Screw, Racing Lug Bolt, Taper Hex Socket Bolt and Flat Washer are typical forms of titanium hardware used where lightweight strength is required. Industry practice for such components includes grades ranging from Grade 2 (commercially pure) to Grade 5 (Ti‑6Al‑4V), with specifications for tensile strength (≈ 340 MPa for Grade 2) and corrosion resistance. The two nail products, identified with HS codes 9614.00 and 8108.90, are special‑purpose fasteners; the former falls under the HS chapter for “Other furniture parts” but is often classified for construction‑grade nails, while the latter is under “Other articles of base metal”. Typical industry grades for titanium nails are also Grade 2, with dimensional tolerances of ±0.1 mm and lengths of 14 mm to 18 mm as noted for the male‑joint version.

Buyers of titanium fasteners usually request data sheets that list mechanical properties (tensile, yield, elongation), chemical composition, and surface finish (e.g., mill finish or passivation). For washers and bolts, standards such as ISO 898‑1 (mechanical properties of fasteners) and DIN 985 (spherical washers) are often referenced. The catalogue’s lack of explicit standards means the buyer should confirm which grade and finish are supplied before placing an order.

Trade and Export Information - Baoji Minghai Titanium Industry Co., Ltd.

China is a major exporter of titanium alloy components, with shipments primarily destined for North America, Europe, and Southeast Asia. Fasteners made from commercially pure titanium (Grade 2) are frequently used in aerospace sub‑assemblies, medical device manufacturing, and high‑performance automotive parts, sectors that require compliance with ASTM B348 and often request CE marking for EU market entry. HS code 8108.90 covers “Other articles of base metal, not elsewhere specified”, a common classification for specialty nails, while HS 9614.00 is used for “Other furniture parts”, which may trigger additional customs inspections for construction‑related imports. Typical certifications requested by importers include ISO 9001, ISO 14001, and material test reports conforming to ASTM or EN standards. Packaging for titanium fasteners is usually in sealed poly‑bags or bulk cartons, sized for 20‑ft or 40‑ft containers, with moisture‑proofing to prevent surface oxidation during transit.

Incoterms such as FOB Shenzhen or CIF Shanghai are standard for Chinese titanium hardware exports. Buyers should verify that the supplier can provide the required phytosanitary or customs documentation for the destination country, and that the product markings meet the HS‑code description to avoid mis‑classification.

Sourcing from Baoji Minghai Titanium Industry Co., Ltd. - Buyer Guidance

When sourcing from Baoji Minghai, buyers should request a full material test report that confirms Grade 2 purity (Ti ≥ 99 %) and lists the exact alloying elements. Samples of the nail and bolt dimensions should be examined for compliance with ISO 898‑1 tensile values (≈ 340 MPa for Grade 2) and with any required surface finish specifications. Because the supplier’s catalogue does not list certifications, the buyer should ask for copies of ISO 9001 or relevant ASTM certificates before confirming large orders.

Verification of packaging dimensions, container loading plans, and the correct HS code declaration will help prevent customs delays. For high‑value titanium components, buyers often require a third‑party inspection (e.g., SGS or Bureau Veritas) prior to shipment, especially when the end‑use involves aerospace or medical applications where traceability is critical.

What titanium grade is used for the listed fasteners?

The catalogue specifies Pure Titanium Grade 2 (Gr2) for the nails and domeless nail; the other fasteners are described without grade, so the buyer should request confirmation of the exact grade, typically Grade 2 for commercially pure titanium.

Which HS codes apply to the products?

Two products have HS codes: the Titanium Nails 14/18 mm Male Joints are under HS 9614.00, and the Universal 6‑in‑1 Titanium Domeless Nail is under HS 8108.90. The remaining items have no HS code listed and should be clarified with the supplier.

Are there standard certifications required for titanium fasteners?

Industry buyers usually request ISO 9001 quality management, ASTM B348 for Grade 2 titanium, and ISO 14001 environmental compliance. The supplier’s own certifications are not listed, so these should be asked for explicitly.

What mechanical properties should I verify?

Typical Grade 2 titanium fasteners have a tensile strength of about 340 MPa, yield strength around 240 MPa, and elongation of 30 %. Buyers should ask for test reports confirming these values.

What packaging is typical for these items?

Titanium fasteners are commonly packed in sealed poly‑bags or bulk cartons, with moisture‑proof liners, and loaded into 20‑ft or 40‑ft containers for export.

Which markets import Chinese titanium fasteners?

Major import markets include the United States, Germany, the United Kingdom, Japan, and South Korea, especially for aerospace, automotive, and medical device sectors.

What documentation is needed for customs clearance?

A commercial invoice, packing list, material test report, and the correct HS code declaration are standard. If the destination requires CE marking or specific import permits, those should be arranged in advance.

What lead times are typical for these products?

Lead times for titanium fasteners from China usually range from 4 to 8 weeks, depending on order size, tooling requirements, and whether a third‑party inspection is scheduled.