About CDM Titanium - Shanghai CDM Industry Co., Ltd. - Titanium Products Supplier in China

China, Shanghai‑based CDM Titanium - Shanghai CDM Industry Co., Ltd. lists 21 active titanium products in its catalogue. The catalogue covers seamless and welded tubes, sheets, plates, bars, coils, foils, forgings, castings, fasteners such as screws, bolts and nuts, wire, pipe fittings and specialised heads. Each entry specifies the titanium grade, most commonly Grade 1, Grade 2 (commercially pure) and Grade 5 (Ti‑6Al‑4V), and several items include material designations such as UNS R50400 or UNS R56400. The supplier groups products under HS‑code families 8108.20, 8108.30 and 8108.90, reflecting different forms and alloy treatments. This structure allows buyers to locate exact forms - tube, sheet, bar or wire - within the standard customs classification used for titanium alloys.

The product list also notes HS codes for individual items: tubes and pipe fittings under 8108.90, forged and casting items under 8108.20, and sheets/plates under 8108.30. Materials are described as commercially pure titanium (CP Ti) Grade 1 or Grade 2 and alloy Grade 5 (Ti‑6Al‑4V). Some items are clad on carbon‑steel substrates, indicating a composite tube‑sheet product. The catalogue includes both standard shapes (round tube, flat sheet) and custom‑machined components such as elliptical and spherical heads. These details align with the typical customs documentation required for titanium exports from China.

Product Range and Specialties of CDM Titanium - Shanghai CDM Industry Co., Ltd.

The catalogue offers titanium seamless and welded tubes, sheet coils, flat plates, round bars, rods, foils, forgings, castings, fasteners and wire, each tied to a specific HS code. Grades range from CP Ti Grade 1 (99.5 % Ti) and Grade 2 (99.2 % Ti) to the high‑strength alloy Ti‑6Al‑4V (Grade 5). Typical industry specifications for these forms include ASTM B265 for sheet and plate, ASTM B381 for bar and round rod, and ASTM B637 for seamless pipe. Buyers often request dimensions such as tube outer diameter 6 mm‑200 mm, wall thickness 0.5 mm‑10 mm, sheet thickness 0.2 mm‑6 mm, and bar diameters up to 100 mm. Surface finish standards (e.g., mill finish, bright annealed) and tolerance classes (e.g., ISO 286) are common in the titanium market.

In addition to standard grades, the supplier lists cladded tube sheets (titanium on carbon‑steel) and specialised heads (elliptical, spherical) that are typical for aerospace and chemical‑process applications. Industry practice often calls for certification to EN 10204 3.1 (inspection certificate) and compliance with aerospace standards such as AMS 4919 for Ti‑6Al‑4V. These enrichments help buyers match product specifications to end‑use requirements such as corrosion resistance, high‑temperature strength or biocompatibility.

Trade and Export Information - CDM Titanium - Shanghai CDM Industry Co., Ltd.

China is a global exporter of titanium alloys, supplying aerospace, medical device, chemical processing and automotive sectors worldwide. HS‑code 8108.90 typically covers finished titanium tubes, pipe fittings and forged items, while 8108.20 covers semi‑finished forms such as wire, pipe sheet and cladded products, and 8108.30 covers sheet and plate. Buyers in North America, Europe and Southeast Asia commonly require ISO 9001 quality management certification and, for aerospace contracts, AS9100 or NADCAP accreditation. Importers also look for mill test reports (MTR) that detail chemical composition, tensile strength, elongation and hardness, as well as compliance with REACH or RoHS where applicable.

Logistically, titanium products are shipped in 20‑ft or 40‑ft containers, often on wooden pallets with moisture‑resistant liners to prevent surface oxidation. Standard Incoterms used include FOB Shanghai and CIF major ports such as Los Angeles, Rotterdam or Singapore. Chinese export regulations for HS 8108 demand accurate declaration of grade, alloy composition and heat‑treatment status, and customs inspections may request sample testing for high‑value aerospace shipments.

Sourcing from CDM Titanium - Shanghai CDM Industry Co., Ltd. - Buyer Guidance

When sourcing from CDM Titanium, buyers should request a current mill test report that confirms the exact grade (e.g., Grade 2 CP Ti, Grade 5 Ti‑6Al‑4V) and the chemical analysis per ASTM B148. Additional documentation such as an EN 10204 3.1 inspection certificate, material safety data sheet (MSDS) and, where required, an ISO 9001 or AS9100 certificate should be verified before placing an order.

Buyers should also confirm dimensional tolerances, surface finish (mill, bright annealed, or polished) and packaging specifications, especially for long‑run tube shipments that may be coiled. Requesting a sample batch and a supplier‑issued test certificate for mechanical properties (tensile strength, yield strength, elongation) helps validate compliance with industry standards before committing to larger volumes.

What titanium grades are available in the tube product line?

The tube catalogue includes commercially pure Grade 1 and Grade 2 titanium as well as the alloy Grade 5 (Ti‑6Al‑4V). Each grade is listed with its corresponding HS code 8108.90 and material designation.

Which HS codes apply to the sheet and plate items?

Titanium sheet and plate are classified under HS code 8108.30. The listed material is typically Grade 1 titanium with a minimum purity of 99.5 % Ti.

How can I verify the chemical composition of a titanium bar?

Request an ASTM‑compliant mill test report (MTR) that details the exact chemical percentages of Ti, Al, V and any trace elements. The report should reference the relevant ASTM B381 standard.

What certifications are typically required for aerospace‑grade titanium components?

Aerospace buyers usually request AS9100 quality management certification and an EN 10204 3.1 inspection certificate. Additional NADCAP process approval may be needed for heat‑treated parts.

What are the common packaging methods for titanium pipe fittings?

Pipe fittings are normally packed in wooden crates or on pallets with protective moisture‑resistant liners. Items are often sealed in double‑wall cardboard boxes for smaller quantities.

What is the typical minimum order quantity (MOQ) for titanium wire?

MOQs vary by grade, but suppliers commonly set a baseline of 500 kg for CP Grade 2 wire and 1 tonne for Grade 5 wire, subject to negotiation based on specification and delivery terms.

Which shipping terms are most frequently used for these products?

FOB Shanghai and CIF to major destination ports (e.g., Los Angeles, Rotterdam, Singapore) are the standard Incoterms employed for titanium exports from China.

How long does lead time usually take for custom‑machined titanium heads?

Custom‑machined elliptical or spherical heads generally require 4‑6 weeks from order confirmation, depending on the complexity of the drawing and the required heat‑treatment process.