About Anping Senming Wire Mesh Co., Ltd. - Wire Mesh Supplier in China

Anping Senming Wire Mesh Co., Ltd. is located in China and currently lists eight distinct wire mesh products in its catalogue. The product set includes wire mesh strainers, insect screening, loop tie wire, tie wire, filter and mesh tube, wire mesh discs, stainless steel wire mesh, and welded wire mesh. All items fall under the broader Wire Mesh category, which is commonly classified under HS chapter 73 for metal products. The supplier’s catalogue reflects a focus on both stainless steel and carbon steel mesh forms used in filtration, screening, and fastening applications.

The eight‑product portfolio is presented without additional branding or client references, aligning with the imported supplier tier designated as “harbor” in the trade platform. Each entry corresponds to a specific mesh configuration, such as perforated screens for insect exclusion or welded panels for structural reinforcement. The listing emphasizes material type (stainless steel or carbon steel) and basic product form rather than detailed technical parameters.

Product Range and Specialties of Anping Senming Wire Mesh Co., Ltd.

Wire mesh products from China are typically offered in a range of mesh openings from 0.5 mm up to 10 mm, with wire diameters between 0.2 mm and 2 mm, and tensile strengths of 400 - 600 MPa for stainless steel grades. Common stainless steel grades are 304 and 316, providing corrosion resistance for food processing, chemical, and marine environments. For carbon steel meshes, grades conforming to ASTM A123 or A497 are frequent, often surface‑treated with galvanization to improve durability.

The catalogue items map onto these standards: wire mesh strainers and filter tubes are usually supplied with mesh openings of 1 - 5 mm for liquid filtration, insect screening is often a 0.5 - 2 mm stainless steel screen, while welded wire mesh panels are produced in standard panel sizes of 1 m × 1 m with gasketed edges. Loop tie wire and tie wire are supplied as continuous coils with diameters from 0.3 mm to 1.2 mm, suitable for agricultural or construction tying applications.

Trade and Export Information - Anping Senming Wire Mesh Co., Ltd.

China ranks among the top global exporters of wire mesh, with major shipment volumes directed to the United States, the European Union, Southeast Asia, and the Middle East. Export logistics commonly use 20‑ft or 40‑ft containers, each capable of holding between 12 and 20 metric tons of rolled or bundled mesh, depending on coil diameter and packaging. Buyers usually request CE marking, ISO 9001 quality management certification, and compliance with ASTM or EN standards as part of the commercial documentation.

Customs authorities often inspect the HS‑code 7308 family for wire mesh products, checking for correct material declarations and compliance certificates. Packaging typically involves coil bundles wrapped in moisture‑resistant film, secured on wooden pallets, facilitating CIF or FOB terms. Seasonal demand peaks in the first and third quarters, aligning with construction and agricultural cycles in importing regions.

Sourcing from Anping Senming Wire Mesh Co., Ltd. - Buyer Guidance

Prospective buyers should obtain a detailed product data sheet that lists mesh opening, wire diameter, material grade, tensile strength, and surface treatment before placing an order. Requesting mill test reports (MTR) and third‑party inspection certificates helps verify that the mesh meets the specified standards. Samples of representative mesh sizes are commonly provided in small coil lengths of 5 m for evaluation.

Typical minimum order quantities range from 500 kg for specialty stainless steel screens to a full 20‑ft container for standard welded mesh panels. Lead times reported by Chinese manufacturers average 30 - 45 days after order confirmation, with longer periods for custom mesh dimensions. Buyers should confirm packaging format (coil vs. flat sheets), pallet size, and preferred Incoterm (e.g., FOB Shanghai or CIF destination) to align with logistics planning.

What types of wire mesh does Anping Senming offer?

The supplier lists eight products covering stainless steel and carbon steel meshes, including strainers, insect screening, loop tie wire, tie wire, filter and mesh tubes, mesh discs, stainless steel wire mesh, and welded wire mesh.

Are material grades and specifications provided?

The catalogue does not include detailed grades, so buyers should request the specific stainless steel grade (e.g., 304 or 316) and wire dimensions, as well as any relevant ASTM or EN standards applicable to the mesh.

How can I obtain samples?

Anping Senming can supply small coil samples of up to 5 meters in length for each mesh type; buyers should specify mesh opening and wire diameter when requesting a sample.

What certifications should I ask for?

Since no certifications are listed, buyers are advised to request ISO 9001 quality management certification, CE marking, and any mill test reports that confirm compliance with ASTM A123/A497 or EN 10204 standards.

What are typical packaging and shipping methods?

Mesh products are usually coil‑wrapped in moisture‑resistant film, placed on wooden pallets, and shipped in 20‑ft or 40‑ft containers under FOB or CIF terms from ports such as Shanghai or Ningbo.

What is the usual MOQ and lead time?

Minimum order quantities commonly start at 500 kg for custom stainless steel screens and up to one full container for standard welded mesh; lead times are generally 30 - 45 days after order confirmation.

Which markets import these products?

Major importers of Chinese wire mesh include the United States, EU member states, Southeast Asian countries, and Middle Eastern construction markets.

Are there any inspection requirements?

Importers typically arrange third‑party inspection under the buyer’s terms, checking mesh dimensions, material grade, and compliance certificates before shipment.