About Aluminum King Company - Aluminum Foils Supplier in China

China‑based Aluminum King Company lists five distinct aluminum products in its catalogue. The company’s active product count of five reflects offerings across foil, coil, sheet and foamed forms, each classified under separate HS‑code families. The catalogue includes an aluminum coil (HS 7606.12) made from multiple alloy series such as 1xxx, 3xxx, 5xxx and 6xxx, and an aluminum foil (HS 7607.11) produced from alloys 8011, 1235 and 1145. Additional items are aluminum foams (HS 7601.20) and aluminum sheet (HS 7606.11) covering grades from 1050 to 6061, plus a food‑grade soft packing foil without an HS code listed. All products are described by alloy composition rather than by brand or certification claims.

Product Range and Specialties of Aluminum King Company

The catalogue covers four core aluminum product families: coil, foil, sheet and foamed metal, each defined by specific alloy designations. In the broader market, aluminum coils are supplied in temper T3 or T4 and thicknesses from 0.5 mm to 5 mm, while foils typically meet ASTM B267 specifications with thicknesses between 0.01 mm and 0.2 mm and are often surface‑treated for food contact. Sheets commonly follow ASTM B209 or EN 485 standards, offering temper designations such as H14, H24, or T6 and thicknesses from 0.2 mm to 25 mm. Foamed aluminum is produced by gas‑injection processes and is used for lightweight structural components, usually supplied in block or panel formats with densities ranging from 0.3 to 0.7 g/cm³. The food‑grade soft packing foil is typically compliant with FDA 21 CFR 184.1101 and EU Regulation 1935/2004 for direct food contact, and is supplied in rolls of up to 600 mm width.

Trade and Export Information - Aluminum King Company

China ranks among the top global exporters of primary and fabricated aluminum, with HS chapter 76 products frequently shipped to Southeast Asia, the Middle East, Europe and North America. Buyers of aluminum coils and sheets often belong to the automotive, construction and electrical equipment sectors, while foil and food‑grade foil are sourced by packaging and consumer goods manufacturers. Common certification requirements for these product families include ISO 9001 quality management, ISO 14001 environmental management, and compliance with ASTM or EN material standards; food‑contact foil additionally demands compliance certificates such as FDA Food Contact Substance (FCS) or EU Food Contact Materials (FCM) dossiers. Export logistics typically involve containerised loads on 20 ft or 40 ft containers, with standard incoterms like FOB Shanghai or CIF Hong Kong, and packaging in timber pallets or shrink‑wrapped rolls to protect surface finish during transit.

Sourcing from Aluminum King Company - Buyer Guidance

When evaluating Aluminum King Company, purchasers should request mill test certificates that detail alloy composition, tensile strength, elongation and temper for each product. For foil and food‑grade foil, buyers should also ask for food‑contact compliance reports, surface‑coating specifications and thickness tolerances measured in microns. Verification of HS codes (7606.12, 7607.11, 7601.20, 7606.11) against import documentation helps ensure correct tariff treatment, and buyers should confirm packaging dimensions, pallet configuration and any moisture‑resistance treatments before confirming orders. Typical minimum order quantities range from one standard 20 ft container for coils or sheets to 5 metric tonnes for specialty foil, with lead times of 30‑45 days depending on alloy and finish.

What alloy series are available for the aluminum coil?

The coil is offered in multiple alloy series, including 1xxx, 3xxx, 5xxx and 6xxx, as indicated in the catalogue under HS 7606.12.

Which HS codes correspond to the aluminium sheet and foil?

Aluminium sheet is listed under HS 7606.11 and aluminium foil under HS 7607.11 in the supplier’s catalogue.

Does the food‑soft packing foil meet food‑contact regulations?

The product is described as a food‑soft packing foil; buyers should request the supplier’s FDA or EU food‑contact compliance documentation to verify conformity.

What typical standards apply to aluminium sheet products?

Aluminium sheets commonly adhere to ASTM B209 or EN 485 specifications, covering temper, thickness and mechanical properties.

Are certification documents such as ISO 9001 or mill test certificates available?

The supplier’s facts do not list certifications; purchasers should explicitly request ISO 9001, ISO 14001 or mill test certificates as part of the due‑diligence process.

What are the usual packaging methods for aluminium foils?

Foils are typically supplied in shrink‑wrapped rolls, often stacked on timber pallets, with roll widths up to 600 mm and lengths defined by the order.

Which markets commonly import Chinese aluminium foams?

Aluminium foams are exported mainly to automotive, aerospace and lightweight construction markets in Europe, North America and Southeast Asia.

What incoterms are most frequently used for these products?

Buyers and sellers often use FOB Shanghai or CIF Hong Kong for aluminium products, reflecting standard Chinese export practices for HS 76 goods.