Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

Bitumen from Delmar Kuwait Petroleum Trading Dmcc is offered in penetration grades 10/20, 60/70, and 80/100, with the grade designation indicating needle penetration depth in decimillimetres at 25 degrees Celsius under standard load. The supplier sources material from established manufacturers for road construction, waterproofing, and roofing end-uses, with bulk supply packaging available alongside smaller quantity options. These grades cover applications from hot climates requiring harder binders to temperate regions where softer grades improve workability at lower temperatures.
Penetration grade bitumen is produced from the vacuum distillation residue of crude petroleum, with the final properties controlled by air-blowing or solvent deasphalting to achieve target hardness and temperature susceptibility. Grade 10/20 is typical for airport runways and heavy-duty pavements in tropical zones, 60/70 suits general highway surfacing, and 80/100 is standard for cold-climate road construction and spray sealing. The supplier notes ISO and SGS certification claims in its promotional material, though buyers should independently verify current certificate validity and scope with Delmar Kuwait Petroleum Trading Dmcc directly.
Primary buyers include civil engineering contractors, asphalt mixing plant operators, and waterproofing membrane manufacturers. Road construction consumes the majority volume as binder in hot-mix asphalt and emulsion formulations. Waterproofing applications employ cutback or oxidised bitumen grades for tanking, flat-roof membranes, and foundation damp-proof courses. Trade terms referenced include FOB and CIF shipment options, with letter-of-credit and telegraphic-transfer payment methods mentioned. Buyers should confirm minimum order quantities, exact Incoterms, and lead times directly with the supplier, as these details are not fixed in the source data.
| Penetration Grade | 10/20, 60/70, 80/100 (source-confirmed) |
| Test Temperature for Penetration | 25 degrees Celsius, standard load (typical ASTM D5 method) |
| Softening Point Range | 35 to 52 degrees Celsius depending on grade (typical for penetration bitumen) |
| Ductility at 25 degrees Celsius | Greater than 100 cm minimum (typical standard for 60/70 and 80/100 grades) |
| Flash Point | Greater than 230 degrees Celsius (typical for penetration grade bitumen) |
| Solubility in Trichloroethylene | 99.0 percent minimum (typical ASTM D4 standard) |
| Packaging | Bulk supply or smaller quantities (source-confirmed, exact unit size unspecified) |
| Certification Claims | ISO and SGS (buyer to verify scope and validity with supplier) |
| Intended Applications | Road construction, waterproofing, roofing (source-confirmed) |
| Origin | United Arab Emirates (source-confirmed, specific refinery undisclosed) |
Delmar Kuwait Petroleum Trading Dmcc is registered in Dubai, United Arab Emirates, with its address at Suite 1608, BB1 Mazaya Business Avenue in the Mazaya Business Avenue district. The company operates under a DMCC (Dubai Multi Commodities Centre) licence, a common free-zone structure for commodity traders in the emirate. Its trust tier is classified as harbour, and both response rate and average response hours show zero recorded activity, which importers should factor into communication expectations.
The supplier profile does not disclose year of establishment, employee count, refinery partnerships, annual throughput, or specific export market experience. No verified client references, audited financials, or detailed ownership structure are present in the source material. Buyers should conduct independent due diligence on company registration, trade references, and banking status before committing to large-volume contracts.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before placing an order with Delmar Kuwait Petroleum Trading Dmcc, verify the company's current DMCC licence status and trading authorisation through the Dubai Multi Commodities Centre registry. Request a current certificate of analysis for the specific penetration grade, including penetration at 25 degrees Celsius, softening point, ductility, flash point, and solubility values with corresponding test methods. Confirm that the bitumen origin matches your project specification, as the supplier source description mentions reliable manufacturers without naming refineries, and origin country alone does not guarantee feedstock consistency. Ask for trade references from recent bitumen exports, particularly to your region, to assess delivery reliability and documentation accuracy.
Logistics arrangements with Delmar Kuwait Petroleum Trading Dmcc require explicit confirmation of Incoterms, as FOB and CIF are both mentioned without specifying loading port or destination obligations. For CIF shipments, clarify insurance coverage limits and the named port of destination; for FOB, confirm the loading terminal in the United Arab Emirates and buyer's nomination procedures. Bitumen bulk shipments typically require heated tanker vessels or bitumen carriers with thermal oil heating systems, maintain cargo temperature between 150 and 180 degrees Celsius depending on grade, and need shore steam or thermal oil heating at discharge. Payment terms referenced include letter of credit and telegraphic transfer, so negotiate advance percentage, documentary requirements, and any performance bond or parent company guarantee before contract execution.
Quality assurance for bitumen imports from Delmar Kuwait Petroleum Trading Dmcc should include pre-shipment inspection by an independent surveyor appointed at the loading port, with joint sampling under ISO 3170 or ASTM D140 protocols. Retain sealed samples for referee analysis at destination if viscosity, penetration, or softening point deviate from certificate values. Inspect heating coils and tank cleanliness if receiving bulk cargo, as cross-contamination with fuel oil or cutter stock alters binder properties and voids asphalt mix design compliance. Obtain the material safety data sheet, bitumen-specific dangerous goods classification for sea transport, and certificate of origin from the supplier to satisfy customs and environmental regulations in the importing country.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing Bitumen for your business, securing the right balance of quality and cost is essential. Delmar Kuwait Petroleum Trading Dmcc, a verified supplier based in United Arab Emirates, offers this product for international export. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $300/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is a staple in the Bitumen, Asphalt sector with strong demand from importing countries worldwide.
Importing Bitumen requires careful attention to shipping logistics, customs compliance, and secure payment terms. Delmar Kuwait Petroleum Trading Dmcc offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading online B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this Bitumen has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Bitumen, Asphalt category and connect with top-tier exporters on our comprehensive B2B marketplace. Start your sourcing journey today.
Importing Bitumen requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Bitumen from Delmar Kuwait Petroleum Trading Dmcc is $300/Bags on FOB terms from United Arab Emirates. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Delmar Kuwait Petroleum Trading Dmcc through EximNext.
The supplier, Delmar Kuwait Petroleum Trading Dmcc, has set a Minimum Order Quantity (MOQ) of 1 Bags for Bitumen. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
The HS Code classification for Bitumen depends on the specific grade and form. Contact Delmar Kuwait Petroleum Trading Dmcc through EximNext for the exact HS Code and customs documentation required for your destination country.
To import Bitumen from United Arab Emirates, negotiate shipping terms (FOB, CIF, or EXW) directly with Delmar Kuwait Petroleum Trading Dmcc. Ensure you have the necessary import licenses for Bitumen, Asphalt products in your destination country.
Yes, Delmar Kuwait Petroleum Trading Dmcc is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to Delmar Kuwait Petroleum Trading Dmcc through EximNext.
Delmar Kuwait Petroleum Trading Dmcc offers Bitumen with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Bitumen is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Delmar Kuwait Petroleum Trading Dmcc through our platform.
Delmar Kuwait Petroleum Trading Dmcc maintains international quality certifications. These ensure that the Bitumen meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Delmar Kuwait Petroleum Trading Dmcc will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Delmar Kuwait Petroleum Trading Dmcc.
Discover more products in Bitumen, Asphalt from verified suppliers worldwide.