Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

Abraj Enterprises offers bitumen for road construction and waterproofing applications, sourced from refineries in Oman. The material is available in multiple grades suited to specific application requirements, with supply offered in bulk for large construction projects. The supplier lists flexible minimum order quantities and trade terms including FOB and CIF options, with payment by letter of credit or telegraphic transfer.
Bitumen is a viscous petroleum-derived hydrocarbon material, typically classified by penetration grade, softening point, and viscosity characteristics. Standard grades for road construction include penetration grades 60/70 and 80/100, measured in units of 0.1 mm at 25 degrees Celsius under standard load. For waterproofing applications, oxidised bitumen with higher softening points (typically 95 to 115 degrees Celsius) and lower penetration values is common. The material exhibits thermoplastic behaviour, becoming softer when heated and harder when cooled, with typical storage temperatures between 150 and 180 degrees Celsius to maintain workability.
Primary buyers include civil engineering contractors, asphalt mix producers, roofing membrane manufacturers, and infrastructure development agencies. Road construction consumes the largest share, where bitumen serves as binder in hot mix asphalt for surface courses, binder courses, and base layers. Waterproofing applications include tanking, flat roofing, and bridge deck protection. Buyers should confirm the specific penetration grade, softening point, and any required performance-grade certification with Abraj Enterprises prior to order placement, as these determine suitability for the intended climate and traffic loading conditions.
| Product Category | Bitumen, penetration grade |
| Typical Penetration Grade | 60/70 or 80/100 (typical for road construction; confirm grade with supplier) |
| Typical Softening Point | 46 to 56 degrees Celsius for 60/70 grade (standard ASTM D36 range) |
| Typical Density at 25 degrees Celsius | 1.01 to 1.05 g per cubic centimetre (standard range for paving grade) |
| Typical Ductility at 25 degrees Celsius | Greater than 100 cm (standard minimum for 60/70 grade) |
| Typical Flash Point | Above 230 degrees Celsius (standard safety minimum for paving bitumen) |
| Typical Loss on Heating | Less than 0.5 percent by mass (standard ASTM D6 specification) |
| Solubility in Trichloroethylene | Greater than 99 percent (standard purity test for bitumen) |
| Available Grades | Multiple grades offered; confirm specific grade with supplier |
| Supply Form | Bulk supply available (typical packaging: steel drums or bulk tanker) |
Abraj Enterprises is an imported supplier tier with harbour trust status, based in Oman. The company has a response rate of 0.00 percent and an average response time of zero hours, which indicates that direct communication through the platform has not been established. Buyers should initiate contact through alternative channels and confirmexclusive availability directly with the supplier before finalising any procurement plan.
The supplier profile does not state years in operation, headcount, annual revenue, specific refinery partnerships, or named clients. Abraj Enterprises lists bitumen for road construction and waterproofing, with trade terms including FOB and CIF, payment by L/C or T/T, and flexible minimum order quantities. The listing references ISO and CE compliance but does not attach certificate numbers or issuing bodies; buyers should request copies of current certificates and verify validity with the certifying organisation.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before placing an order with Abraj Enterprises, verify the specific bitumen grade held in stock and request a current certificate of analysis showing penetration, softening point, ductility, and viscosity values. Confirm that the grade matches your project specification, climate conditions, and any national road authority requirements. Check the supplier's business registration in Oman and request references from previous export shipments to your region if available.
Freight terms offered are FOB and CIF, but the named port of loading in Oman is not stated; confirm this with the supplier to calculate total landed cost. Lead time, vessel availability, and bulk tanker or drum shipment schedules should be agreed in writing. Payment is by letter of credit or telegraphic transfer; for L/C, negotiate acceptable documents including certificate of origin, quality certificate, and bill of lading, and confirm your bank's willingness to issue credit for an Omani supplier.
On arrival, conduct independent inspection of the consignment for grade verification against the certificate of analysis. Sample the material for repeat penetration and softening point testing at an accredited local laboratory. Check drum integrity for leakage or contamination, and verify bulk tanker temperature logs if applicable. Retain all documentation including packing lists, certificates, and inspection reports for customs clearance and project quality records.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
Securing a reliable supply chain for Bitumen is critical for maintaining your business operations. Abraj Enterprises, a verified supplier located in Oman, provides high-quality Bitumen ready for international export. By connecting directly with this supplier, buyers can bypass intermediaries, negotiate custom wholesale pricing, and arrange bulk shipments. This product is a key offering within the Bitumen, Asphalt industry, catering to distributors, wholesalers, and importers worldwide.
Navigating the complexities of global sourcing is easier when you have direct access to the right manufacturers and exporters. When importing Bitumen from Oman, buyers can discuss shipping logistics, packaging requirements, and preferred payment terms directly with Abraj Enterprises. This seamless communication is powered by EximNext, a premier online B2B marketplace that connects ambitious buyers with verified global sellers across every major industry.
We understand that verifying supplier credentials is a top priority for importers. Abraj Enterprises is part of our extensive network of vetted international exporters. Browse more products in the Bitumen, Asphalt category or discover new suppliers across the Bitumen, Asphalt sector. Expand your sourcing capabilities through our trusted B2B marketplace — the import export marketplace built for serious international trade.
When importing Bitumen from Oman, buyers should consider shipping terms (FOB, CIF, EXW), customs documentation requirements, and payment security. Contact the supplier to discuss the best logistics options for your destination country.
Click the "Request Quotation" button to contact Abraj Enterprises directly. The supplier will provide a custom quote based on your required bulk quantity and shipping destination.
Yes, Abraj Enterprises provides Bitumen for bulk export from Oman. You can negotiate the MOQ, packaging details, and shipping terms directly with the supplier.
Shipping terms such as FOB, CIF, or EXW can be negotiated directly with Abraj Enterprises. Contact the supplier to discuss the best logistics options for importing Bitumen to your country.
Send a direct message to Abraj Enterprises through our platform to request a product sample before committing to a large wholesale order.
Abraj Enterprises is a registered and verified supplier on EximNext. We recommend using our secure messaging system and standard international payment methods (L/C, T/T, Escrow).
Request a detailed product data sheet including grade, purity, dimensions, material composition, and applicable industry standards from Abraj Enterprises.
Many suppliers on EximNext, including Abraj Enterprises, offer custom packaging and private label options for bulk wholesale orders.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services.
Yes, EximNext hosts a wide network of verified Bitumen, Asphalt manufacturers, exporters, and wholesalers across 200+ countries.
Click "Request Quotation" or "Contact Supplier" on this page. Include your required quantity, destination country, and preferred shipping terms. All communications are managed securely through our online B2B marketplace.
Discover more products in Bitumen, Asphalt from verified suppliers worldwide.