Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

Reciclaje Y Almacenaje De Materias Plásticas supplies compressed Aluminum 3000 Series scrap from Spain, specifically manganese-alloyed grades 3003, 3004, and 3105 compressed into high-density bales. The source material derives from sheet and plate offcuts, can body stock, and architectural trim, with the 3000 series designation indicating 1.0-1.5% manganese content that enhances strength without sacrificing formability. The compression process reduces volume by approximately 70% compared to loose scrap, lowering container shipping costs and furnace charging time for secondary smelters.
The 3003 grade contains 1.0-1.5% Mn and 0.05-0.20% Cu, offering typical tensile strength of 145-195 MPa in the annealed condition, while 3105 carries 0.3-0.8% Mn with tighter control for deep-drawing applications. Standard contamination thresholds for this scrap category typically limit iron to 0.7%, silicon to 0.6%, and zinc to 0.25%, though buyers should verify actual assay certificates. The manganese addition in 3000 series alloys provides superior corrosion resistance in marine and chemical environments compared to 1000 series, making this scrap particularly valued for remelting into cladding, roofing, and heat exchanger applications.
Primary buyers include secondary aluminum smelters in Turkey, India, and Southeast Asia, as well as domestic Spanish refiners producing deoxidized billet and continuous cast slab. Typical end-use remelts target 3xxx series rolling slab or foundry alloy ingot for automotive heat shields and HVAC components. Buyers should confirm bale dimensions, density per cubic meter, and whether material is magnetically separated or eddy-current sorted before contracting. The supplier's harbor-tier status indicates basic marketplace registration; the 0.00% response rate means direct follow-up by email or phone is essential to establish availability, current stock volumes, and payment structure.
| Alloy Grades | 3003, 3004, 3105 (source-confirmed) |
| Major Alloying Element | Manganese: 1.0-1.5% typical for 3003; 0.3-0.8% typical for 3105 |
| Bale Format | Compressed high-density bales (source-confirmed) |
| Typical Bale Density | 800-1200 kg/m³ typical for compressed aluminum sheet scrap |
| Typical Contamination Limits | Fe ≤0.7%, Si ≤0.6%, Zn ≤0.25%, Cu ≤0.25% typical for 3000 series scrap |
| Typical Tensile Strength (Annealed) | 145-195 MPa typical for 3003-O |
| Electrical Conductivity | 28-34% IACS typical for 3003 alloy |
| Melting Range | 643-654 °C typical for 3003 |
| Typical End-Use Remelt Products | Rolling slab, continuous cast billet, foundry ingot for heat exchangers and cladding |
| Source Sorting Method | Confirm with supplier: eddy-current or hand-sorting expected |
Reciclaje Y Almacenaje De Materias Plásticas is registered as a Spanish supplier with harbor-tier marketplace status, indicating basic company verification without extended due diligence completion. The supplier's address is listed only as Spain with no city, port, or specific facility location disclosed in the available profile. The response rate of 0.00% and average response time of zero hours suggest no historical inquiry responses are recorded, which requires buyers to initiate direct contact through alternative channels to assess operational capacity.
The company name references plastic materials recycling and warehousing rather than primary metals specialization, suggesting either diversified waste management operations or a possible naming legacy from earlier business focus. No workforce scale, annual turnover, ISO certifications, or specific aluminum handling equipment are stated in the profile. Buyers should verify whether the supplier holds Spanish waste management licenses (autorización de gestor de residuos), scrap metal merchant registration, and direct sourcing relationships with 3000 series alloy generators rather than brokered aggregation.
Compressed Aluminum 3000 Series scrap consists of manganese-alloyed aluminum scraps including grades such as 3003, 3004, and 3105, compressed into high-density bales for efficient handling and smelting. This secondary aluminum material is widely sourced by smelters and refiners for producing new aluminum sheets, cans, building products, and automotive components. As a tradable commodity on global scrap markets, compressed 3000 series aluminum offers significant cost savings over primary aluminum while maintaining good formability and corrosion resistance properties.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before placing an order with Reciclaje Y Almacenaje De Materias Plásticas, verify the supplier's actual physical address and facility access, as the profile lists only Spain without city or port proximity. Request recent spectrographic assay certificates from an independent laboratory, not older than 30 days, with full elemental breakdown including Mn, Fe, Si, Cu, Zn, Ti, and Cr to 0.01% precision. Confirm the supplier holds valid Spanish waste management authorization and can provide documentary evidence of scrap origin, whether post-industrial sheet offcuts or post-consumer collection. Given the zero recorded response rate, establish direct voice or video contact before deposit payment to confirm operational existence and current stock availability.
For logistics, determine whether the supplier delivers to Spanish port or requires buyer-arranged inland collection, as this significantly affects total landed cost. Standard Incoterms for Spanish scrap exports are FOB Valencia/Barcelona or CIF destination port; CFR is less common due to marine insurance allocation complexities. Payment structures in the scrap metal trade typically involve 30% advance with balance against scanned shipping documents, though the supplier may propose alternatives. Plan for 2-4 weeks from order confirmation to vessel loading, with additional time for independent pre-shipment inspection if contractually required. Confirm container type, standard 20-foot or 40-foot high-cube, and whether the supplier provides container weight and packing certificates.
Quality verification should include pre-shipment inspection by an accredited surveyor, with sampling protocol following ISO 15547 or Bureau Veritas scrap metal inspection standards. Witness the compression process if possible, or request timestamped video documentation showing bale formation and labeling. Upon arrival, conduct opening inspection for moisture, foreign material, and alloy mix verification, retaining samples for potential arbitration analysis. Documentation review must include weighbridge tickets, packing lists, and customs export declarations. For 3000 series scrap specifically, run spark spectroscopy or XRF on representative samples to confirm manganese content falls within expected ranges, as misidentified 1000 series or contaminated 5000 series material will degrade remelt yields and final product performance.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing Aluminum 3000 Series Scrap Compressed for your business, securing the right balance of quality and cost is essential. Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l, a verified supplier based in Spain, offers this product with key specifications including 3000 Series (AA3003, AA3004, AA3105) Aluminum Alloy Scrap, Compressed/Baled, Aluminum (Al) content typically 90-98%, Manganese (Mn) 0.5-1.5%, Iron (Fe) up to 1.0%, Silicon (Si) up to 0.6%, and Compressed bales: typically 500mm x 500mm x 800mm to 1000mm x 1000mm x 1500mm, variable by supplier. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $700900/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is actively traded under HS Code 7602.00, making it a staple in the Aluminium Scrap sector with strong demand from importing countries worldwide.
Importing Aluminum 3000 Series Scra requires careful attention to shipping logistics, customs compliance, and secure payment terms. Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 7602.00 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading online B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this Aluminum 3000 Series Scra has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Aluminium Scrap category and connect with top-tier exporters on our comprehensive B2B marketplace. Start your sourcing journey today.
Importing Aluminum 3000 Series Scra requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 7602.00 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Aluminum 3000 Series Scrap Compressed from Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l is $700900/Bags on FOB terms from Spain. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l through EximNext.
The supplier, Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l, has set a Minimum Order Quantity (MOQ) of 1 Bags for Aluminum 3000 Series Scra. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
For international shipping and customs clearance, Aluminum 3000 Series Scrap Compressed is classified under HS Code 7602.00. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
To import Aluminum 3000 Series Scra from Spain, negotiate shipping terms (FOB, CIF, or EXW) directly with Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l. Ensure you have the necessary import licenses for Aluminium Scrap products in your destination country.
Yes, Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
The key specifications for Aluminum 3000 Series Scrap Compressed supplied by Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l include 3000 Series (AA3003, AA3004, AA3105) Aluminum Alloy Scrap, Compressed/Baled, Aluminum (Al) content typically 90-98%, Manganese (Mn) 0.5-1.5%, Iron (Fe) up to 1.0%, Silicon (Si) up to 0.6%, and Compressed bales: typically 500mm x 500mm x 800mm to 1000mm x 1000mm x 1500mm, variable by supplier. For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l offers Aluminum 3000 Series Scra with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Aluminum 3000 Series Scra is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l through our platform.
Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l maintains international quality certifications. These ensure that the Aluminum 3000 Series Scra meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Reciclaje Y Almacenaje De Materias Pl�¡sticas,� s.l.
Discover more products in Aluminium Scrap from verified suppliers worldwide.