About Ivory Aus LLC - Plastic Scrap Supplier in Albania

Ivory Aus LLC operates out of Tirana, Albania and currently lists ten active products in its catalogue. The supplier’s portfolio covers a mix of polymer and metal scrap, including low‑density polyethylene (LDPE) film scrap (HS 3915.10), high‑density polyethylene (HDPE) film and bottle scrap (HS 3915.10), ABS regrind (HS 3915.90), BOPP printed rolls (HS 3920.20), PET bottle lumps (HS 3915.10), polyurethane foam scrap (HS 3921.19) and several aluminium streams such as UBC cans, wheels and extrusion 6063 alloy (HS 7602.00).

Product Range and Specialties of Ivory Aus LLC

The catalogue’s polymer items reflect standard industry grades: LDPE film is typically supplied with a melt flow index (MFI) between 0.5‑2 g/10 min and a density of 0.910‑0.925 g/cm³, while HDPE grades used for bottles and films commonly show an MFI of 0.2‑5 g/10 min and a density of 0.940‑0.965 g/cm³. ABS regrind is usually required to meet a purity of 95 % or higher and a melt flow range of 3‑15 g/10 min. BOPP rolls are graded by thickness (10‑30 µm) and clarity, and PET bottle scrap is often evaluated for intrinsic viscosity (IV) around 0.70‑0.80 dL/g. PU foam scrap is characterized by its density (30‑100 kg/m³) and cell structure, while aluminium 6063 alloy scrap is identified by its alloy designation and typical alloy composition (Al‑Si‑Mg).

Trade and Export Information - Ivory Aus LLC

Albania’s scrap exports are routed primarily to the European Union, Turkey and the Middle East, where plastics and aluminium are in high demand for secondary manufacturing. HS Chapter 39 products such as LDPE, HDPE, ABS, PET and PU foam are subject to EU REACH registration and often require ISO 9001 quality management certification or a third‑party audit report confirming recycled content (e.g., ASTM D6866). Aluminium HS 7602 shipments are commonly inspected for alloy grade and may need a certificate of origin and compliance with EU RoHS for trace metals. Typical logistics involve bales, rolls or drums packed on wooden pallets, loaded into 20 ft or 40 ft containers, with FOB Tirana or CIF Mediterranean ports being the standard Incoterms for bulk scrap shipments.

Sourcing from Ivory Aus LLC - Buyer Guidance

Buyers should request a Material Safety Data Sheet (MSDS) and recent test reports for melt flow index, ash content and metal detection for each polymer grade. For aluminium streams, a certificate of alloy composition and a mill test report confirming the 6063 designation are standard. Samples of 25 kg for polymers or 50 kg for aluminium are typical for preliminary quality verification, and buyers are advised to confirm the exact HS code and packaging format before placing a full order.

What types of plastic scrap does Ivory Aus LLC offer?

The supplier lists LDPE film, HDPE film and bottle scrap, ABS regrind, BOPP printed rolls, PET bottle lumps and polyurethane foam, all classified under HS 3915 or HS 3920/3921 codes.

Which aluminium scrap grades are available?

Three aluminium streams are listed: UBC cans, wheels/rims and extrusion 6063 alloy, each falling under HS 7602.00 and identified as the 6063 alloy grade.

How is the plastic scrap packaged for export?

Plastic scrap is typically baled, rolled or pelletised, placed on wooden pallets and loaded into standard 20 ft or 40 ft containers for sea freight.

What documentation should I request before purchasing?

Request a Material Safety Data Sheet, recent melt flow index or density test reports, a certificate of origin and, where applicable, ISO 9001 or REACH compliance statements.

Are there common certifications buyers require for these materials?

Buyers often ask for ISO 9001 quality management certification, REACH registration for plastics and a mill test report confirming alloy composition for aluminium scrap.

What are typical minimum order quantities (MOQ) for the listed products?

MOQs generally start at 1 ton for polymer bales, 500 kg for roll or pellet shipments, and 2 tons for aluminium scrap, though exact values depend on packaging and destination.

What lead times can I expect for shipment from Albania?

Lead times are usually 10‑15 working days after order confirmation, assuming standard FOB Tirana loading and no special packaging requests.

Which regions most frequently import these Albanian scrap products?

The EU (especially Italy, Greece and Germany), Turkey and Gulf Cooperation Council countries are the primary import markets for Albanian plastic and aluminium scrap.