Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›


1215 GROUP LLC offers aluminum extrusion scrap consisting primarily of 6063 and 6061 alloy grades, materials widely recognised in secondary aluminium smelting for their consistent chemistry and low contamination levels. The supplier describes this scrap as clean and uncontaminated, suitable for direct remelting without preliminary sorting or cleaning operations that add cost and environmental burden. These alloy grades typically yield recycled aluminum with magnesium contents of 0.45-0.9% for 6063 and 0.8-1.2% for 6061, silicon levels of 0.40-0.80% and 0.40-0.80% respectively, and copper below 0.10% for 6063 and 0.15-0.40% for 6061. The scrap is supplied in compacted bales or loose form, with documented chemical composition reports provided to buyers.
The distinction between 6063 and 6061 extrusion scrap matters significantly for remelting economics and end-use suitability. 6063 scrap, with its lower copper content and superior extrudability, typically commands preference for architectural extrusion recycling where surface finish and anodizing response are prioritised. 6061 scrap, containing magnesium and silicon levels that form Mg2Si strengthening phase, is favoured for structural and transport applications requiring higher strength in the recycled product. Both grades extrude cleanly with minimal oxide generation when properly prepared, though 6061's higher magnesium content demands slightly more flux and temperature control during remelting. The supplier's mention of documented chemical composition reports is significant, as many scrap transactions rely on visual grading rather than spectrometric verification.
Typical buyers include secondary aluminium smelters producing specification ingot, die-casting manufacturers seeking lower-cost feedstock than primary metal, and large recycling facilities with remelt capability. End-use sectors span automotive component casting, construction extrusion, consumer durables, and general engineering where alloy specifications permit recycled content. The supplier indicates availability for bulk container or breakbulk shipment to global markets, though no minimum order quantities, pricing structures, or standard shipping schedules are disclosed. Buyers should confirm the typical bale density, loose material bulk density, and whether material is sheared to length or arrives as full extrusion lengths requiring additional processing. The supplier's location in Atlanta, Georgia, positions it near the Port of Savannah, a major US east coast container gateway, though inland trucking arrangements to this port add to landed cost calculations.
| Primary Alloy Grades | 6063 and 6061 (extrusion grade; confirm ratio and segregation in shipment) |
| Typical 6063 Composition | Mg 0.45-0.9%, Si 0.20-0.60%, Fe max 0.35%, Cu max 0.10% (standard per AA specifications) |
| Typical 6061 Composition | Mg 0.8-1.2%, Si 0.40-0.80%, Cu 0.15-0.40%, Cr 0.04-0.35% (standard per AA specifications) |
| Supply Form | Compacted bales or loose (bale dimensions, density, and weight to be confirmed) |
| Contamination Level | Clean, uncontaminated (definition and acceptance criteria to be specified in contract) |
| Documentation Provided | Chemical composition reports (sampling method, test laboratory, and frequency to be confirmed) |
| Typical Remelting Yield | 92-96% for clean extrusion scrap (typical industry range; actual depends on furnace type and flux practice) |
| Packaging for Export | Bulk container or breakbulk (container loading weight and stowage factor to be confirmed) |
| Origin of Material | United States (specific collection region and generator types to be confirmed) |
| Material Form | Extrusion scrap (profile type, cut length, and presence of thermal-break strips to be confirmed) |

1215 GROUP LLC is a well-established company that specializes in the supply and export of premium-quality ARABICA coffee beans. Based in Atlanta, Georgia, United States, the company prides itself on offering its customers only the highest quality products and services. With years of experience in the coffee industry, 1215 GROUP LLC has built a strong reputation for excellence and reliability. The company sources its ARABICA coffee beans from the best plantations around the world, ensuring that only the finest quality beans are used in its products. 1215 GROUP LLC has a team of expert coffee professionals who oversee every aspect of the production process, from sourcing to packaging and shipping. The company's ARABICA coffee beans are carefully roasted to perfection, resulting in a rich aroma, smooth flavor, and full-bodied taste that is sure to please even the most discerning coffee drinkers. Thanks to its advanced logistics capabilities and state-of-the-art facilities, 1215 GROUP LLC is able to handle large-scale orders with ease. Whether you're a coffee shop owner, a restaurant manager, or simply a coffee lover looking for the best quality beans, you can count on 1215 GROUP LLC to deliver exceptional products and outstanding service every time. In summary, 1215 GROUP LLC is a trusted and reliable supplier of premium ARABICA coffee beans, offering exceptional quality, competitive pricing, and fast, reliable delivery to customers across the United States and around the world.
Our premium aluminum extrusion scrap is sourced from certified industrial suppliers, primarily consisting of 6063 and 6061 alloy grades with clean, uncontaminated composition suitable for direct remelting. This material is ideal for secondary aluminium smelters, die-casting manufacturers, and recycling facilities seeking consistent feed stock for new extrusion or ingot production. Supplied in compacted bales or loose form with documented chemical composition reports, the scrap meets international export standards and is available for bulk container or breakbulk shipment to global markets.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before committing to volume purchases from 1215 GROUP LLC, verify their operational history, banking references, and whether they hold ISRI (Institute of Scrap Recycling Industries) membership or RIOS certification for recycling quality management. Request site visit or video verification of their material handling, segregation, and baling facilities to confirm cleanliness standards match their claims. Specify exact acceptance criteria for alloying elements, contamination limits, and physical form in your purchase contract, with provision for third-party pre-shipment inspection by SGS, Bureau Veritas, or equivalent. The supplier's trust tier of 'harbor' with zero recorded response rate on this platform means direct due diligence through independent channels is essential.
Logistics from Atlanta, Georgia, typically routes through the Port of Savannah, approximately 250 miles southeast, with inland trucking cost and transit time to be factored into total landed cost. Container loading and ocean freight arrangements depend on negotiated Incoterms, FOB Savannah placing export formalities and inland transport on the seller, while CIF destination adds ocean freight and marine insurance to their obligation. Payment structures for scrap metal transactions often involve letter of credit or documentary collection to mitigate non-delivery risk, though established relationships may operate on open account terms. Lead times depend on material availability, baling schedule, and vessel frequency from Savannah to the destination port, all requiring direct confirmation with 1215 GROUP LLC.
Quality assurance on arrival should include visual inspection for prohibited materials such as painted extrusions with non-compliant coatings, zinc-contaminated items, or ferrous attachments that evaded magnetic separation. Representative sampling for spectrometric re-analysis should follow ISO 1811, with disputed lots subject to arbitration per contract terms. Store material under cover to prevent moisture absorption before remelting, and implement stock rotation to avoid long-term oxidation. For smelters seeking ISRI grade compliance, verify whether the supplied material meets 'Extrusion' (ISRI Code Troma) or 'Old Extrusion' (ISRI Code Tense) definitions, as these classifications affect market pricing and end-use acceptability. Maintain chain of custody documentation for sustainability certification programs that track recycled content.
Active buying requirements from importers looking for Similar products

Compare alternatives, find similar products and connect with verified suppliers
When sourcing Aluminum Extrusion Scrap for your business, securing the right balance of quality and cost is essential. 1215 GROUP LLC, a verified supplier based in United States, offers this product with key specifications including 6063, 6061 and mixed extrusion grade aluminum alloy scrap, Aluminium content 91% - 98%, residual oil/contamination <1%, and Length 10cm - 100cm, thickness 1mm - 15mm, loosely packed or baled (1-3 MT bales). By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $280/Metric Ton and manage bulk orders with a minimum order quantity (MOQ) of 100 Metric Ton. This product is actively traded under HS Code 7602.00, making it a staple in the Aluminium Boring Scrap sector with strong demand from importing countries worldwide.
Importing Aluminum Extrusion Scrap requires careful attention to shipping logistics, customs compliance, and secure payment terms. 1215 GROUP LLC offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 7602.00 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading global B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this Aluminum Extrusion Scrap has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Aluminium Boring Scrap category and connect with top-tier exporters on our comprehensive import export marketplace. Start your sourcing journey today.
Importing Aluminum Extrusion Scrap requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 7602.00 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Aluminum Extrusion Scrap from 1215 GROUP LLC is $280/Metric Ton on FOB terms from United States. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to 1215 GROUP LLC through EximNext.
The supplier, 1215 GROUP LLC, has set a Minimum Order Quantity (MOQ) of 100 Metric Ton for Aluminum Extrusion Scrap. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
For international shipping and customs clearance, Aluminum Extrusion Scrap is classified under HS Code 7602.00. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
To import Aluminum Extrusion Scrap from United States, negotiate shipping terms (FOB, CIF, or EXW) directly with 1215 GROUP LLC. Ensure you have the necessary import licenses for Aluminium Boring Scrap products in your destination country.
Yes, 1215 GROUP LLC is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
The key specifications for Aluminum Extrusion Scrap supplied by 1215 GROUP LLC include 6063, 6061 and mixed extrusion grade aluminum alloy scrap, Aluminium content 91% - 98%, residual oil/contamination <1%, and Length 10cm - 100cm, thickness 1mm - 15mm, loosely packed or baled (1-3 MT bales). For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
1215 GROUP LLC offers Aluminum Extrusion Scrap with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Aluminum Extrusion Scrap is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from 1215 GROUP LLC through our platform.
1215 GROUP LLC maintains international quality certifications. These ensure that the Aluminum Extrusion Scrap meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. 1215 GROUP LLC will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with 1215 GROUP LLC.
Discover more products in Aluminium Boring Scrap from verified suppliers worldwide.