Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

The STC-VV005 PCI Express power splitter cable from STC-Cable is a 6-inch adapter that converts one standard 6-pin PCIe power connector into dual 6-pin outputs. It is designed for systems running dual nVidia SLI or ATI CrossfireX configurations where the existing power supply offers only a single 6-pin PCIe connection. The cable length of 6 inches (approximately 150 mm) provides short-run routing inside standard and compact ATX cases without excess slack.
This splitter uses standard PCI Express power wiring with 18 AWG conductors typical for PCIe auxiliary power cables, carrying +12 V and ground lines across each 6-pin connector. The dual outputs are wired in parallel from the input, drawing current from the same rail rather than isolating rails. Industry standard colour coding (yellow for +12 V, black for ground) is typical, though buyers should verify conductor gauge and pinout alignment against their specific GPU power demands to avoid undervoltage under load.
System integrators, PC refurbishers, and gaming rig builders use this cable to extend the service life of existing power supplies when upgrading to multi-GPU setups. It suits scenarios where PSU replacement is cost-prohibitive or physically impractical, such as OEM workstations with proprietary form factors. Importers should confirm with STC-Cable whether the cable uses 18 AWG or 20 AWG conductors, whether ferrite cores are present for noise suppression, and what MOQ applies for branded or bulk orders.
| Cable Length | 6 in (150 mm) |
| Input Connector | 1 x 6-pin PCI Express male (standard) |
| Output Connectors | 2 x 6-pin PCI Express female |
| Conductor Gauge | 18 AWG typical for PCIe auxiliary power cables |
| Voltage Rail | +12 V DC (standard PCIe power pinout) |
| Current Capacity per Branch | 75 W typical (6.25 A at +12 V per standard 6-pin PCIe specification) |
| Wire Configuration | Parallel split from single input |
| Primary Application | Dual nVidia SLI or ATI CrossfireX video card power |
| Intended Use Case | Avoid PSU replacement in multi-GPU builds |
| Packaging | Anti-static bag typical for cable accessories |
STC-Cable operates from Songgang, Shenzhen, in the Guangdong province of China, with postal address 518105. The supplier holds a harbor trust tier, which represents a baseline verification level on the platform. The response rate shows 0.00 percent with zero average response hours recorded, indicating no recent engagement data is available through the platform's messaging system.
The supplier's listing focuses on the STC-VV005 SKU, a PCIe power splitter cable, with product-specific technical copy rather than broad catalogue claims. No factory size, year of establishment, revenue figures, or named clients appear in the available profile. Buyers should treat STC-Cable as a Shenzhen-based cable assembler or trader with unverified responsiveness, and conduct direct due diligence on production capacity, sample availability, and quality control documentation before committing to volume orders.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before placing an order with STC-Cable, verify the conductor gauge independently. Request a sample unit and measure wire diameter with calipers or request a mill certificate showing copper cross-sectional area in square millimetres. Confirm that connector housings are Molex or equivalent UL-listed components, not unbranded substitutes with reduced insertion cycle ratings. Ask for a pinout diagram and verify with a continuity tester that +12 V and ground lines map correctly across all three connectors.
Logistics and lead time must be confirmed directly with STC-Cable given the zero percent response rate on platform messaging. Shenzhen exports typically ship through Yantian or Shekou port. Negotiate Incoterms carefully: EXW Songgang places inland transport burden on the buyer, while FOB Shenzhen shifts export customs to the seller. For payment, letter of credit or 30 percent deposit with balance against B/L copy are common structures with Chinese cable suppliers, though STC-Cable's specific terms require direct negotiation. Air freight suits sample and small-batch orders; sea freight applies above 500 kg.
Quality assurance for PCIe power cables demands incoming inspection of conductor resistance, insulation integrity, and connector retention force. Use a micro-ohmmeter to verify that parallel branches show matched resistance within 5 percent. Subject samples to 24-hour burn-in at rated current to detect hot spots from poor crimping or undersized wire. Request RoHS compliance documentation and REACH substance declarations, as EU-bound shipments face strict market surveillance. Retain pre-shipment inspection reports and photograph connector markings for traceability if field failures occur.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing 6in Pci Express Power Splitter Cable for your business, securing the right balance of quality and cost is essential. STC-Cable, a verified supplier based in China, offers this product for international export. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $3/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is a staple in the Wires & Cables sector with strong demand from importing countries worldwide.
Importing 6in Pci Express Power Spl requires careful attention to shipping logistics, customs compliance, and secure payment terms. STC-Cable offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading import export marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this 6in Pci Express Power Spl has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Wires & Cables category and connect with top-tier exporters on our comprehensive online B2B marketplace. Start your sourcing journey today.
Importing 6in Pci Express Power Spl requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for 6in Pci Express Power Splitter Cable from STC-Cable is $3/Bags on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to STC-Cable through EximNext.
The supplier, STC-Cable, has set a Minimum Order Quantity (MOQ) of 1 Bags for 6in Pci Express Power Spl. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
The HS Code classification for 6in Pci Express Power Splitter Cable depends on the specific grade and form. Contact STC-Cable through EximNext for the exact HS Code and customs documentation required for your destination country.
To import 6in Pci Express Power Spl from China, negotiate shipping terms (FOB, CIF, or EXW) directly with STC-Cable. Ensure you have the necessary import licenses for Wires & Cables products in your destination country.
Yes, STC-Cable is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to STC-Cable through EximNext.
STC-Cable offers 6in Pci Express Power Spl with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
6in Pci Express Power Spl is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from STC-Cable through our platform.
STC-Cable maintains international quality certifications. These ensure that the 6in Pci Express Power Spl meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. STC-Cable will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with STC-Cable.
Discover more products in Wires & Cables from verified suppliers worldwide.