Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

This 8mm 3k twill matte prepreg carbon fiber plate combines a high-strength 3k carbon fiber weave with a pre-impregnated epoxy resin system, cured to form a rigid panel. The matte surface finish reduces glare and improves adhesion for secondary bonding or coating, while the twill pattern offers balanced mechanical properties in both longitudinal and transverse directions. The plate maintains a consistent 8mm thickness across its area, with tight tolerances typical for prepreg composite manufacturing.
The material uses standard 3k carbon fiber tow, a common industry specification for aerospace and performance applications, with a typical fiber areal weight of 200 g/m² per ply. Prepreg carbon fiber plates are normally autoclave-cured, resulting in a fiber volume fraction of 58 to 62 percent, which delivers high tensile strength and stiffness. The matte finish is achieved through a textured peel ply or a post-cure sanding process, providing a non-reflective surface that is often preferred in optical or stealth applications.
These plates are widely adopted in drone frames, UAV components, and high-performance automotive panels where weight savings and structural integrity are critical. Aerospace subcontractors and custom fabricators source them for prototypes and low-volume production runs. Buyers typically confirm MOQ, packaging standards, and Incoterms with the supplier, as these are not fixed across all orders. The plates are shipped flat, often interleaved with protective layers to prevent surface damage during transit.
| Material | 3k carbon fiber twill weave with epoxy prepreg |
| Thickness | 8 mm |
| Surface Finish | Matte |
| Weave Pattern | Twill 2x2 |
| Fiber Areal Weight | 200 g/m² typical per ply |
| Fiber Volume Fraction | 58 - 62 percent typical |
| Cure Process | Autoclave typical |
| Tensile Strength | 600 - 700 MPa typical for 3k twill prepreg |
| Tensile Modulus | 60 - 70 GPa typical |
| Density | 1.55 - 1.65 g/cm³ typical |
XC Carbon Fiber Co., Limited operates from an industrial facility in Dongguan, Guangdong, China, situated in District D of the city’s designated manufacturing zone. The company’s address places it within a cluster of composite material producers, a region known for its concentration of carbon fiber and advanced material suppliers. The listing does not provide verification metrics beyond the harbor trust tier, and the response rate and average response hours are currently recorded as zero.
The supplier specializes in carbon fiber products, with this prepreg plate representing a core offering in its portfolio. No additional details such as year of establishment, production capacity, or certifications are stated in the available profile. Buyers are advised to contact the company directly to confirm manufacturing capabilities, quality control processes, and any industry-specific certifications relevant to their application.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before placing an order, verify the plate’s mechanical properties, such as tensile strength, modulus, and interlaminar shear strength, as these can vary based on the resin system and cure cycle. Request third-party test reports or certificates of compliance to ensure the material meets your project’s specifications. Confirm whether the supplier can provide custom sizes or thicknesses, as the listing only specifies the 8mm option.
Logistics details to confirm include lead time, which can vary depending on the supplier’s production schedule and order volume. Clarify the Incoterms offered, such as FOB or CIF, and the port of loading, as this will impact shipping costs and delivery timelines. Discuss packaging requirements to ensure the plates arrive undamaged, as carbon fiber panels are susceptible to scratches and impacts during transit.
Quality checks should include visual inspection for surface defects, dimensional verification using calipers or a coordinate measuring machine, and non-destructive testing if required. Request documentation such as material traceability records, cure process data, and any relevant certifications. For critical applications, consider arranging a third-party inspection before shipment to validate the material’s properties and compliance with your standards.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing 3k Twill Matte Prepreg Carbon Fiber Plate 8mm for your business, securing the right balance of quality and cost is essential. XC Carbon Fiber Co., Limited, a verified supplier based in China, offers this product for international export. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $100/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is a staple in the Carbon sector with strong demand from importing countries worldwide.
Importing 3k Twill Matte Prepreg Ca requires careful attention to shipping logistics, customs compliance, and secure payment terms. XC Carbon Fiber Co., Limited offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading online B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this 3k Twill Matte Prepreg Ca has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Carbon category and connect with top-tier exporters on our comprehensive B2B marketplace. Start your sourcing journey today.
Importing 3k Twill Matte Prepreg Ca requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for 3k Twill Matte Prepreg Carbon Fiber Plate 8mm from XC Carbon Fiber Co., Limited is $100/Bags on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to XC Carbon Fiber Co., Limited through EximNext.
The supplier, XC Carbon Fiber Co., Limited, has set a Minimum Order Quantity (MOQ) of 1 Bags for 3k Twill Matte Prepreg Ca. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
The HS Code classification for 3k Twill Matte Prepreg Carbon Fiber Plate 8mm depends on the specific grade and form. Contact XC Carbon Fiber Co., Limited through EximNext for the exact HS Code and customs documentation required for your destination country.
To import 3k Twill Matte Prepreg Ca from China, negotiate shipping terms (FOB, CIF, or EXW) directly with XC Carbon Fiber Co., Limited. Ensure you have the necessary import licenses for Carbon products in your destination country.
Yes, XC Carbon Fiber Co., Limited is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to XC Carbon Fiber Co., Limited through EximNext.
XC Carbon Fiber Co., Limited offers 3k Twill Matte Prepreg Ca with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
3k Twill Matte Prepreg Ca is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from XC Carbon Fiber Co., Limited through our platform.
XC Carbon Fiber Co., Limited maintains international quality certifications. These ensure that the 3k Twill Matte Prepreg Ca meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. XC Carbon Fiber Co., Limited will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with XC Carbon Fiber Co., Limited.
Discover more products in Carbon from verified suppliers worldwide.