About YERMOOK INDUSTRIES - Sportswear Supplier in Pakistan

YERMOOK INDUSTRIES is located in the Punjab province of Pakistan and currently lists ten active product entries in its catalogue. The company’s catalogue spans categories such as jackets, hoodies, blazers, sweatshirts, uniform accessories, wool‑blend clothing, gym vests, and swimwear, each linked to HS‑code families ranging from 6101 to 6201 for apparel and 4203 for leather gloves. The supplier describes itself as a cut‑to‑pack manufacturer offering private‑label services and custom design for sportswear, with a stated standard turnaround time of less than two weeks. Its product list includes items such as Custom Design Hoodies (HS 6110.20, polyester‑cotton knitted), Track Suit Jogging Suit (HS 6112.19, polyester‑cotton Taslan), Varsity Jacket (HS 6201.92, wool‑blend body with leather or simulated leather sleeves), and Golf Gloves (HS 4203.29, sheep cabretta, synthetic or Amaram leather).

Product Range and Specialties of YERMOOK INDUSTRIES

The catalogue presents a mix of knitted and woven garments: polyester‑cotton hoodies (HS 6110.20), polyester‑cotton Taslan tracksuits (HS 6112.19), wool‑blend varsity jackets with leather sleeves (HS 6201.92), nylon coach jackets (HS 6201.92), polyester fleece jackets (HS 6101.30), and multi‑material leggings, bras and tanks (HS 6104.63). In the broader sportswear industry, hoodies are commonly produced to ISO 9001 quality systems and often carry Oeko‑Tex Standard 100 certification for textile safety. Track suits typically meet ASTM D4966 for tear resistance and may be graded by GSM values between 150‑250. Wool‑blend jackets are evaluated for fiber content (often 50 % wool, 50 % synthetic) and may require fire‑retardant testing under NFPA 701. Gloves for golf and cycling are usually classified under HS 4203 and are tested for leather grain quality, abrasion resistance, and may be certified to ISO 12947 for leather durability.

Trade and Export Information - YERMOOK INDUSTRIES

Pakistan is a recognized exporter of knitted and woven sports apparel, with the European Union, United States and Middle‑East markets accounting for the largest share of demand. HS‑code 6101‑6104 covers knitted or crocheted garments, while HS 6201 addresses woven apparel such as jackets; both groups are subject to customs inspections for textile composition, labeling and, where applicable, compliance with REACH (EU) or CPSIA (US) chemical restrictions. Buyers frequently request certificates of origin, material composition sheets and test reports for colorfastness, shrinkage and flammability. Standard export packaging includes poly‑bagging of individual garments, followed by cardboard cartons sized for 40‑ft containers, with typical loading of 1,200‑1,500 pieces per container depending on garment thickness. Incoterms such as FOB Karachi or CIF Dubai are commonly used for these categories.

Sourcing from YERMOOK INDUSTRIES - Buyer Guidance

When sourcing from YERMOOK INDUSTRIES, buyers should obtain a detailed bill of materials that confirms the polyester‑cotton, nylon or wool‑blend ratios listed in the catalogue. Requesting pre‑production samples and third‑party lab reports for ISO 9001, Oeko‑Tex or relevant fire‑retardant standards helps verify compliance before bulk orders. Verify that the supplier can provide a certificate of origin and, if exporting to the EU or US, a REACH or CPSIA compliance statement. Typical minimum order quantities for custom hoodies or jackets range from 200 to 500 pieces, with lead times reported as under two weeks for sample development and 4‑6 weeks for full production runs. Confirm packaging details - individual poly‑bagging, carton dimensions, and labeling - to align with the buyer’s logistics and customs documentation requirements.

What HS codes are associated with the hoodies listed by YERMOOK INDUSTRIES?

The Custom Design Hoodies are classified under HS 6110.20, which covers knitted or crocheted garments of cotton or synthetic fibers.

Can I obtain material composition certificates for the varsity jackets?

Yes, the supplier should provide a composition certificate indicating the wool‑blend body and the leather or synthetic leather used for the sleeves, matching the HS 6201.92 description.

What testing is typically required for the fleece jackets?

Fleece jackets (HS 6101.30) are commonly tested for fabric weight (GSM), colorfastness to washing, and melt‑flow index of the polyester fibers; buyers usually request lab reports for these parameters.

Are the golf gloves compliant with leather quality standards?

Golf gloves fall under HS 4203.29 and are usually inspected for leather grain thickness, abrasion resistance (ISO 12947) and may be accompanied by a leather certification such as ISO 17025 test results.

What is the standard lead time for a custom track suit order?

The supplier states a standard turnaround of less than two weeks for design approval, followed by a typical production lead time of four to six weeks for full quantities.

Which packaging format is used for bulk shipments of leggings and tanks?

Leggings, bras and tank tops (HS 6104.63) are packed in individual poly‑bags, then grouped into cardboard cartons sized for 40‑ft container loading, usually 1,200‑1,500 pieces per container.

What certifications should I request before placing an order?

Buyers should request a certificate of origin, material composition sheet, and any relevant third‑party test reports such as Oeko‑Tex Standard 100, ISO 9001 quality system certification, or fire‑retardant test results depending on the product.

Is private‑label branding possible for all listed products?

The catalogue indicates private‑label and mock‑up services for all apparel items, including hoodies, jackets, track suits and leggings, allowing buyers to supply their own branding designs.