About Yantai Yuguang Ruiliside Commodity Co., Ltd. - Dental Equipments & Materials Supplier in China

Yantai, China hosts Yantai Yuguang Ruiliside Commodity Co., Ltd., which currently lists eight active products in its catalogue. All items fall under the Dental Equipments & Materials category and include various forms of dental floss, floss holders, and floss picks that are marketed for personal oral hygiene and professional dental use. The product list comprises length‑specific floss rolls (20 m, 30 m, 50 m), silk and nylon flosses, specialty flosses with charcoal or bamboo charcoal, and two types of floss pick accessories. Each item is identified by an HS‑code family such as 3306 for floss preparations, 9018.49 for dental floss holders, and 9603.21 for plastic floss picks, reflecting the customs classification used for export.

The catalogue explicitly names the material composition for each product, ranging from medical‑grade polypropylene or polystyrene housings to nylon monofilament, PTFE, natural silk, UHMWPE and activated bamboo charcoal. The floss holder pick is recorded under HS code 9018.49 and combines a plastic base with nylon floss, while the thin credit‑card floss uses a nylon or PTFE monofilament and is classified under HS code 3306.20. The bamboo charcoal floss pick, also under 9018.49, pairs a bamboo handle with activated charcoal nylon floss. Both silk floss in a glass bottle case (HS 3306.10) and silk floss with a glass bottle case (HS 3306.10) are listed, completing the eight‑product offering.

Product Range and Specialties of Yantai Yuguang Ruiliside Commodity Co., Ltd.

The eight products cover four material families that dominate the dental floss market: nylon monofilament, PTFE, natural silk and specialty polymers such as UHMWPE and bamboo‑derived charcoal. In the industry, nylon floss is typically supplied in diameters of 0.15 mm to 0.20 mm with tensile strengths of 10‑15 MPa, while PTFE floss offers low friction and higher resistance to moisture absorption. Silk floss is marketed for its natural feel and is usually graded by length and moisture content, often wrapped in glass bottles for premium presentation. UHMWPE floss picks are valued for extreme abrasion resistance, with melt flow indices around 0.5 g/10 min. Charcoal‑infused flosses are increasingly used for odor control and are tested for activated carbon surface area, commonly above 800 m²/g. The catalogue’s credit‑card sized floss (20 m) meets the convenience segment, whereas the 30 m and 50 m rolls address bulk‑use and professional settings. Standard packaging includes sealed plastic pouches for floss rolls and individual cardboard or plastic holders for picks, matching typical export packaging for dental consumables.

Trade and Export Information - Yantai Yuguang Ruiliside Commodity Co., Ltd.

China is one of the world’s largest exporters of dental consumables, and the HS‑code sections represented in this catalogue (3306, 9018, 9603) are routinely cleared through major ports for shipment to North America, the European Union, and Southeast Asian markets. Buyers in these regions usually require CE marking for EU imports and FDA registration for the United States, alongside ISO 13485 or GMP certificates that demonstrate compliance with medical device regulations. Dental floss products classified under HS 3306 are often subject to customs inspections for moisture content and foreign material limits, while floss holders under HS 9018.49 may be examined for biocompatibility standards. Export logistics typically involve 20‑foot containers that can hold up to 1,200 kg of bulk floss rolls or 2,000 units of plastic picks, with common Incoterms such as FOB Yantai or CIF Shanghai. Seasonal demand peaks in the first quarter for back‑to‑school campaigns and in the fourth quarter for holiday gift sets, influencing shipment planning.

Sourcing from Yantai Yuguang Ruiliside Commodity Co., Ltd. - Buyer Guidance

When sourcing from this supplier, buyers should request a Material Safety Data Sheet (MSDS) for each floss material, as well as a Certificate of Conformity that references CE or FDA compliance where applicable. Test reports for tensile strength, filament diameter, and microbial limits are standard quality documents for dental floss and should be verified before order confirmation. Verify the HS code declared on the commercial invoice matches the product description (e.g., 3306.20 for thin credit‑card floss) to avoid customs delays. Typical minimum order quantities range from 5,000 m of floss roll to 2,000 units of floss picks, and lead times in China are generally 30‑45 days after sample approval. Samples of each material (nylon, PTFE, silk, UHMWPE) are advisable to assess texture, flexibility and any residual odor before bulk purchase.

What types of dental floss does Yantai Yuguang Ruiliside Commodity Co., Ltd. offer?

The supplier lists nylon and PTFE monofilament floss in 20 m, 30 m and 50 m lengths, a natural silk floss packaged in glass bottles, and specialty flosses containing activated bamboo charcoal or charcoal‑infused nylon.

Which HS codes are associated with the floss picks and holders?

Floss picks such as the UHMWPE and bamboo charcoal models are classified under HS code 9603.21, while the plastic holder pick uses HS code 9018.49.

What material certifications should a buyer request for these dental products?

Buyers should request an MSDS, a Certificate of Conformity referencing CE or FDA standards, and any ISO 13485 or GMP audit reports that cover the medical‑grade plastic or polymer components.

What are the typical packaging formats for the floss rolls?

Floss rolls are commonly packed in sealed polyethylene bags, with the 30 m and 50 m versions often bundled in cardboard cartons of 100 units, while the credit‑card floss is supplied in individual blister packs.

What is the usual minimum order quantity for the silk floss in glass bottles?

The silk floss packaged in a glass bottle is typically ordered in batches of 1,000 units, though the supplier may adjust the MOQ based on container space and buyer requirements.

How long does it take to produce and ship an order from Yantai?

Standard lead time after sample approval is 30‑45 days, followed by shipping under FOB Yantai or CIF Shanghai depending on the buyer’s chosen Incoterm.

Are there any specific testing standards for the dental floss material?

Industry testing includes tensile strength (10‑15 MPa for nylon), filament diameter tolerance (±0.02 mm), moisture content below 5 %, and microbial limits according to ISO 10993‑1 for biocompatibility.

Can the supplier provide custom lengths or packaging for floss rolls?

Custom lengths and private‑label packaging are possible; buyers should specify the desired length, packaging type and any branding requirements during the quotation stage.