About Broad World Precision Industry Co., Ltd. - Dies & Mouldings Supplier in Taiwan

Broad World Precision Industry Co., Ltd. is located in New Taipei City, Taiwan and currently lists ten active products in its catalogue. The company’s catalogue focuses on components used in the mould and die sector, covering items such as profile punches, circular die buttons, forming dies and aluminium structure plates, each classified under HS chapters 8207, 8480, 8466, 9031, 7606 and 8477. The product set spans both high‑speed tool steel and aluminium alloy materials, reflecting the typical material mix required for precision die‑making and gear production. Taiwan’s established precision engineering ecosystem supports the manufacturing of these parts for downstream automotive, electronics and industrial equipment users.

The listed products include a Profile Punch made from SKH51 high‑speed tool steel (HS 8207.30), Circular Die Buttons using SKD11/ SKH51 tool steel (HS 8207.30), and a Forming Die of CALDIE cold‑work tool steel (HS 8207.30). Retainers for press dies are supplied in SCM220 chromium‑molybdenum alloy steel (HS 8480.60) and Precision Gears are produced from S45C carbon steel (HS 8483.40). Additional offerings comprise automation fixtures (HS 8466.93), inspection gauges (HS 9031.80), aluminium structure plates of AL6061‑T6 (HS 7606.12), and a configurable basic assembly service (HS 8477.89). Each item is referenced by its HS code family, enabling buyers to align customs documentation with the specific material and function of the component.

Product Range and Specialties of Broad World Precision Industry Co., Ltd.

The catalogue concentrates on tool‑making and die‑making components where material hardness, wear resistance and dimensional stability are critical. High‑speed steels such as SKH51 and SKD11 typically achieve a Rockwell hardness of 62‑66 HRC and are selected for rapid cutting applications, while chromium‑molybdenum alloys like SCM220 are valued for their tensile strength above 800 MPa and good machinability. Aluminium alloy AL6061‑T6 plates are standard in precision fixtures, offering a typical tensile strength of 310 MPa and a thickness tolerance of ±0.1 mm. In the gear sector, S45C (AISI 1045 equivalent) is a common carbon‑steel grade delivering a hardness range of 55‑60 HRC after heat treatment, suitable for medium‑load industrial gearboxes. Buyers familiar with these grades can compare the supplier’s material specifications against industry benchmarks such as ISO 6508 for hardness testing and ISO 13399 for tool data representation.

Trade and Export Information - Broad World Precision Industry Co., Ltd.

Taiwan is a major exporter of precision tooling, with the majority of shipments destined for automotive manufacturers in China, electronics assemblers in Southeast Asia, and machinery firms in Europe and North America. The HS‑code families present in this catalogue (8207, 8480, 8466, 9031, 7606, 8477) are routinely inspected under customs regimes that require material safety data sheets, conformity certificates (e.g., ISO 9001 quality‑management) and, where applicable, CE marking for equipment parts entering the European Economic Area. Standard export packaging includes wooden crates or steel pallets with moisture‑resistant liners, and container loading typically follows 20‑ft or 40‑ft ISO containers with FOB or CIF terms. Taiwanese exporters often provide pre‑shipment inspection reports under the supervision of agencies such as SGS or Bureau Veritas, aligning with buyer expectations for traceability and compliance.

Sourcing from Broad World Precision Industry Co., Ltd. - Buyer Guidance

When sourcing these tooling components, buyers should request a mill test certificate (MTC) that details chemical composition and mechanical properties for each steel grade, as well as a hardness report complying with ISO 6508. For aluminium parts, an aluminium alloy certification confirming temper T6 and tensile properties is standard. Dimensional inspection reports, preferably generated by CMM (coordinate‑measuring machine) data and conforming to ISO 10360, help verify that tolerances meet the buyer’s engineering drawings. Samples of critical parts such as profile punches or forming dies should be evaluated for surface finish (Ra ≤ 0.8 µm) and edge integrity before committing to larger production runs.

What material grades are used for the Profile Punch and Circular Die Buttons?

Both the Profile Punch and Circular Die Buttons are made from high‑speed tool steels - SKH51 for the punch and SKD11 or SKH51 for the buttons - which typically reach 62‑66 HRC Rockwell hardness after heat treatment.

Which HS codes apply to the Precision Gears offered by the supplier?

Precision Gears are classified under HS code 8483.40, which covers gears and gear boxes of a kind used in machinery.

What documentation should a buyer request for the Aluminium Structure Plate?

Buyers should ask for an aluminium alloy certification confirming the AL6061‑T6 temper, a mill test certificate showing chemical composition, and a tensile test report indicating a minimum tensile strength of 310 MPa.

Are there standard certifications commonly required for these tooling products?

Typical certifications include ISO 9001 for quality management systems, ISO 14001 for environmental management, and, where the parts are destined for the EU, CE marking to demonstrate conformity with relevant safety directives.

What are the usual packaging methods for exporting the die components?

Die components are generally packed in wooden crates or steel pallets with internal separators and moisture‑resistant liners, secured for transport in 20‑ft or 40‑ft containers under FOB or CIF terms.

How can a buyer verify the hardness of the tool steel components?

Hardness can be verified through a Rockwell hardness test (HRC) performed by an accredited laboratory, with results reported according to ISO 6508 and attached to the mill test certificate.

What lead time is typical for a custom Press Die Retainer?

Custom press‑die retainers usually require a lead time of 4‑6 weeks, depending on material availability, machining complexity and any required heat‑treatment cycles.

Is it possible to obtain a sample of the Inspection Gauge before full order?

Yes, the supplier can provide a functional sample of the inspection gauge, accompanied by a calibration certificate that complies with ISO 10360 standards for measurement equipment.