About Tempro International - Bentonite Supplier in Turkey

Turkey, Istanbul based Tempro International lists seven active products in its catalogue. The portfolio includes three mineral products - White (Calcium) Bentonite cat litter, raw Sepiolite clay, and Sodium Bentonite (both non‑treated and cat‑litter grade) - all classified under HS 2508.10 or 2512.00. In addition, the company offers three hygiene‑equipment items: a wall‑mounted single hand‑disinfection cabinet (HS 8419.89), a floor‑mounted unit with turnstile (HS 8422.89), and a platform hand‑disinfection unit (HS 8479.89). Each product entry records the primary material, such as calcium bentonite, magnesium silicate sepiolite, or stainless‑steel 304 housing.

The mineral entries are described by their chemical family: calcium bentonite is a calcium‑rich smectite, while the sodium variants belong to the sodium‑montmorillonite group. The hygiene equipment is noted as fabricated from stainless‑steel 304, with optional powder‑coated steel housings for the floor‑mounted model. No additional product categories or certifications are claimed beyond the listed catalogue items.

Product Range and Specialties of Tempro International

The catalogue covers two clay mineral families that are widely used in absorbent and binding applications. Calcium bentonite typically meets ICUMSA 45‑type purity, with moisture below 2 % and particle size distribution centred around 10‑30 µm, while sodium bentonite grades are evaluated for swelling index (often >100 mL/100 g) and cation‑exchange capacity above 80 meq/100 g. Sepiolite is valued for its high porosity and adsorption capacity, commonly supplied with a bulk density of 0.6‑0.8 t/m³ and a moisture content under 5 %.

Hand‑disinfection units are manufactured from stainless‑steel 304, a corrosion‑resistant alloy meeting ASTM A240. Typical industry specifications include an IP rating of at least IP 54 for splash protection, CE marking for mechanical safety, and modular dimensions that fit standard 40‑ft containers. Buyers often request documentation of material traceability, weld certifications, and compliance with EN 60335‑2‑15 for electrical safety where applicable.

Trade and Export Information - Tempro International

Turkey is a major exporter of industrial clays, with the EU, Middle East, and North Africa representing the largest import regions for bentonite and sepiolite. HS 2508.10 and 2512.00 shipments are routinely subject to REACH registration in the EU and may require a Certificate of Origin for preferential tariff treatment under the EU‑Turkey Customs Union. Hygiene‑equipment under HS 8419‑8479 is commonly shipped to hospitals, airports, and large commercial facilities, where CE conformity and ISO 9001 quality management are standard prerequisites.

Typical logistics involve bulk shipments of bentonite in 20‑ft containers (approximately 15‑18 t per container) and smaller sealed packages for the hand‑disinfection units, which are packed on pallets in 40‑ft containers. Incoterms such as FOB Istanbul Port or CIF EU destination are frequently used. Exporters from Turkey also provide MSDS sheets, third‑party laboratory analysis, and, where requested, test reports for heavy‑metal limits in compliance with EU Regulation 2023/2006.

Sourcing from Tempro International - Buyer Guidance

Buyers should request a recent laboratory analysis that includes moisture content, purity percentage, particle‑size distribution, and swelling index for bentonite products. For sepiolite, verify bulk density, silica‑to‑magnesium ratio, and any heavy‑metal screening results before confirming a purchase. Hygiene equipment buyers need the CE Declaration of Conformity, an EN‑standard compliance certificate, and a test report confirming the IP rating and load‑bearing capacity of the turnstile mechanisms.

Before finalising orders, confirm the supplier can provide a Certificate of Origin, REACH registration numbers for the clay minerals, and a full Material Safety Data Sheet (MSDS). For the stainless‑steel units, request weld‑procedure specifications and, if the equipment will be used in a regulated environment, a validation report against EN 60335‑2‑15. Verifying these documents helps ensure customs clearance and downstream compliance with regional regulations.

What mineral grades does Tempro International offer for bentonite?

The catalogue lists calcium bentonite (white cat litter) and two sodium bentonite grades - non‑treated and cat‑litter grade - both classified under HS 2508.10. Typical industry specifications include moisture below 2 % and a swelling index above 100 mL/100 g for the sodium variants.

Is Sepiolite supplied with any purity or moisture specifications?

Sepiolite is offered as raw material (HS 2512.00) and is commonly expected to have moisture content under 5 % and bulk density between 0.6 and 0.8 t/m³. Buyers should request a recent lab analysis confirming these parameters.

What material is used for the hand‑disinfection cabinets?

All three hygiene units are fabricated from stainless‑steel 304, with the floor‑mounted model featuring an additional powder‑coated steel housing. Stainless‑steel 304 complies with ASTM A240 for corrosion resistance.

Which certifications are typically required for the hygiene equipment?

Buyers usually require CE marking for mechanical safety, compliance with EN 60335‑2‑15 for electrical safety, and an ISO 9001 quality‑management certificate from the supplier. Documentation of the IP rating (minimum IP 54) is also standard.

How are the clay minerals packaged for export?

Bulk bentonite is typically loaded in 20‑ft containers in moisture‑controlled bags or bulk bags, allowing 15‑18 t per container. Sepiolite may be shipped in sealed bulk bags or intermediate bulk containers, depending on order size.

What documentation should a buyer request before importing the clays?

A buyer should obtain a Certificate of Origin, REACH registration confirmation for the specific mineral, and a Material Safety Data Sheet (MSDS). A third‑party laboratory test report covering purity, moisture, and heavy‑metal limits is also advisable.

What are the typical lead times for the hand‑disinfection units?

Standard production lead times for stainless‑steel units range from 30 to 45 days after order confirmation, depending on finish (plain or powder‑coated) and any customization of dimensions.

Can Tempro International ship to regions outside the EU?

While the facts do not list specific target markets, Turkish exporters of mineral clays and hygiene equipment commonly serve the Middle East, North Africa, and Asian markets using FOB Istanbul Port or CIF terms to the buyer’s destination.