About Suneo Auto Parts Industry Co., Ltd - Automobile Spare Parts & Supplies Supplier in China

China is the manufacturing base for Suneo Auto Parts Industry Co., Ltd, which currently lists six distinct automotive components in its catalogue. The company classifies its offerings under the Automobile Spare Parts & Supplies category, covering both engine and chassis items. Its product list includes generic filters, drive belts, brake pads, a clutch cover, an auto water pump, and a shock absorber. The water pump entry specifies an HS code of 8413.30 and details a cast‑iron impeller, steel shaft, mechanical seal and either aluminum or cast‑iron housing. The shock absorber entry carries HS code 8708.80 and notes a high‑grade steel housing, chrome‑plated piston rod and synthetic hydraulic oil.

The remaining items - filter, belts, brake pads and clutch cover - are presented without HS codes in the supplied data but fall within standard automotive parts HS chapters such as 8421 for filters and 8708 for other accessories. Materials for the filter are typically paper or synthetic media, while belts are commonly manufactured from rubber‑reinforced fabric or polyurethane. Brake pads are usually offered in semi‑metallic or ceramic formulations, and clutch covers are cast from aluminum or iron to match engine block specifications. All six items together form a concise portfolio aimed at replacement and maintenance applications. The catalogue does not disclose additional certifications or production capacity.

Product Range and Specialties of Suneo Auto Parts Industry Co., Ltd

The catalogue’s six items represent common replacement parts in the automotive aftermarket. Filters are generally rated by filtration efficiency (e.g., 99.9% particle capture) and flow capacity measured in cubic meters per hour. Drive belts are supplied in V‑belt, timing‑belt and serpentine formats, with width and length dimensions expressed in millimetres and tensile strength in MPa. Brake pads are classified by material composition - semi‑metallic, ceramic or organic - and are tested for friction coefficient and wear rate on a dynamometer. Clutch covers are typically cast from aluminium alloy or grey iron to provide heat dissipation and structural rigidity. The water pump listed under HS 8413.30 usually delivers flow rates between 30 and 120 L/min, operates at pressures up to 2 bar, and conforms to ISO 11170 for performance testing. Shock absorbers under HS 8708.80 are offered with single‑tube or twin‑tube designs, damping force expressed in N/mm, and can be tuned for compression and rebound rates according to vehicle suspension specifications.

Trade and Export Information - Suneo Auto Parts Industry Co., Ltd

China ranks among the world’s largest exporters of automotive components, supplying parts to markets in Southeast Asia, Europe and North America. HS chapter 84 (84 130‑84 199) covers water pumps and related machinery, while HS 87 080 pertains to suspension parts such as shock absorbers; customs authorities often request test certificates that confirm compliance with ISO 9001 quality management and, for EU destinations, CE marking and RoHS conformity. Export shipments are typically packed on Euro pallets, with water pumps and shock absorbers placed in wooden crates or corrugated boxes that protect against vibration; container loads range from 20‑ft to 40‑ft units depending on order volume. Incoterms most frequently used for Chinese auto‑parts exporters are FOB Shanghai or CIF destination port, with buyers arranging inland transport. Buyers commonly request pre‑shipment inspection reports (PSI) and material safety data sheets (MSDS) to satisfy import regulator requirements.

Sourcing from Suneo Auto Parts Industry Co., Ltd - Buyer Guidance

When sourcing from Suneo Auto Parts Industry Co., Ltd, buyers should request detailed product data sheets that list material composition, dimensional tolerances and performance test results for each part. For the water pump and shock absorber, ask for ISO 11170 pump performance curves and ISO 2631 vibration test reports respectively, as well as certificates proving compliance with any destination‑specific standards such as CE or E-mark. Verify the HS codes (8413.30 for the water pump and 8708.80 for the shock absorber) on the commercial invoice to ensure correct tariff treatment, and confirm that packaging meets ISO 1161 container standards for safe sea transport. Request a sample batch before committing to larger volumes to assess fitment and durability against the vehicle specifications you target.

What automotive parts does Suneo Auto Parts Industry Co., Ltd list in its catalogue?

The supplier lists six items: a generic filter, drive belts, brake pads, a clutch cover, an auto water pump (HS 8413.30) and a shock absorber (HS 8708.80).

Which HS codes are associated with the water pump and shock absorber?

The water pump is classified under HS code 8413.30, which covers pumps for liquids, and the shock absorber falls under HS code 8708.80, which covers parts and accessories of motor vehicles.

What materials are specified for the water pump?

The water pump description includes a cast‑iron impeller, a steel shaft, a mechanical seal and a housing made of either aluminum or cast iron.

What are the typical material components of the shock absorber?

The shock absorber is described as having a high‑grade steel housing, a chrome‑plated piston rod and synthetic hydraulic oil as the damping medium.

Are there common certifications buyers should request for these automotive parts?

Buyers usually request ISO 9001 quality‑management certification, ISO/TS 16949 for automotive production, and, for European markets, CE marking and RoHS compliance documentation.

What packaging formats are standard for shipping water pumps and shock absorbers?

Standard practice is to place each unit in a wooden crate or reinforced corrugated box, then palletize the crates for loading into 20‑ft or 40‑ft containers.

What typical lead times are observed for Chinese auto‑parts exporters?

Lead times commonly range from 15 to 30 days after order confirmation, depending on production scheduling and the need for any pre‑shipment inspections.

How can a buyer obtain samples before placing a full order?

Buyers should contact the supplier to request a sample batch, specifying the exact part number, required specifications and the destination for delivery; most suppliers provide a quoted FOB price for the sample shipment.