About Shenzhen Ccb Technology Co., Ltd. - Telecommunication Cables Supplier in China

Shenzhen Ccb Technology Co., Ltd. is based in Shenzhen, China and currently lists six active products across its catalogue. The company’s top categories are Telecommunication Cables, Cable Assemblies, and Electronic Connectors. Its product list includes two variants of UTP Category 5e LAN cable (4‑pair, 24 AWG), a Category 6 UTP LAN cable, a Cat6 RJ45 keystone jack, an FTP keystone jack, and a CAT6/6E LAN cable. The FTP keystone jack is recorded under HS code 8536.70 and is described as having an ABS fire‑retardant housing, gold‑plated phosphor bronze contacts and metallic foil/brass shielding. The CAT6/6E LAN cable carries HS code 8544.42 and specifies bare copper (99.99 %) or CCA/CCS conductors with PE or PVC jacket.

The remaining items - the UTP Cat5e and Cat6 LAN cables and the UTP Cat6 RJ45 keystone jack - are listed without explicit HS codes but fall within the standard HS chapters for insulated copper conductors and connectors. All six entries are presented as ready‑made products rather than custom‑manufactured solutions. The catalogue therefore covers both cable conductors and the associated connector hardware used in structured cabling installations.

Product Range and Specialties of Shenzhen Ccb Technology Co., Ltd.

The catalogue features UTP Category 5e LAN cable (4‑pair, 24 AWG) and Category 6 LAN cable, both of which are standard in structured wiring. In the industry Category 5e is rated for up to 100 MHz and 1 Gbps, while Category 6 supports 250 MHz and up to 10 Gbps over shorter runs; both conform to TIA/EIA‑568‑B and IEC 60603‑7‑1 specifications. Typical grades include CM (general‑purpose), CMR (riser) and CMP (plenum) with fire‑rating requirements such as UL94 V‑0. The CAT6/6E LAN cable listed with HS code 8544.42 specifies bare copper (99.99 %) or copper‑clad aluminium conductors, insulated with PE or PVC, which matches common export specifications for high‑performance data cabling. The FTP keystone jack (HS 8536.70) and the RJ45 keystone jack use fire‑retardant ABS housings, gold‑plated phosphor‑bronze contacts and metallic foil/brass shielding - materials that meet IEC 60950‑1 and IEC 60335 safety standards. Buyers typically request RoHS compliance, CE marking and UL listing for such connectors, although the catalogue does not state which of these certifications the supplier currently holds.

Cable assemblies that combine the listed conductors with the corresponding keystone jacks are frequently supplied on reels of 100 m or in bulk cartons, packed for container loading. Industry practice calls for clear labeling of conductor type, AWG, shielding, and fire‑rating on each reel, as well as inclusion of a test report confirming insertion loss, return loss and crosstalk performance against the relevant category standards.

Trade and Export Information - Shenzhen Ccb Technology Co., Ltd.

China is a major exporter of telecommunications cabling and connector hardware, with primary destinations in North America, the European Union, Southeast Asia and the Middle East. HS code 8544.42 for insulated copper conductors and HS code 8536.70 for connector units are routinely inspected under China’s CIQ system and often require a test certificate confirming compliance with IEC or TIA standards before customs release. Typical buyer requirements include CE declaration of conformity for EU markets, FCC Part 15 compliance for the United States, and RoHS certification for electronic components. Export shipments are commonly loaded in 20‑ft or 40‑ft containers, with reels or bulk cartons secured on palletized frames; Incoterms such as FOB Shanghai or CIF destination are standard in the sector.

Sourcing from Shenzhen Ccb Technology Co., Ltd. - Buyer Guidance

When sourcing these cables and connectors, request a product data sheet that lists the exact conductor material (copper purity or CCA ratio), AWG, jacket type, and fire‑rating class. Ask for a TIA/EIA test report that documents insertion loss, return loss and NEXT performance at the advertised category frequency, as well as a RoHS compliance statement and any CE or UL certificates applicable to the connectors. Verify the HS codes (8544.42 for the CAT6/6E cable and 8536.70 for the FTP keystone jack) on the commercial invoice and ensure that the packaging specifies reel length, total weight and handling instructions; typical minimum order quantities range from 500 m of cable to 1 000 connector units, with lead times of 30‑45 days after order confirmation.

What types of data cables are listed in the catalogue?

The catalogue includes a UTP Category 5e LAN cable (4‑pair, 24 AWG), a Category 6 UTP LAN cable and a CAT6/6E LAN cable that is described with HS code 8544.42 and specifies bare copper or CCA conductors with PE or PVC jacket.

Which connector products are offered and what are their material specifications?

Two keystone jacks are listed: an FTP keystone jack (HS 8536.70) with an ABS fire‑retardant housing, gold‑plated phosphor bronze contacts and metallic foil/brass shielding, and a UTP Cat6 RJ45 keystone jack (material details not specified but typical of gold‑plated contacts and ABS housing).

Are any certifications mentioned for the products?

The facts do not specify any certifications held by the supplier. Buyers should request RoHS, CE, UL or FCC compliance certificates as appropriate for telecom cabling and connectors.

What HS codes apply to the products?

The FTP keystone jack is assigned HS code 8536.70 and the CAT6/6E LAN cable is assigned HS code 8544.42. The remaining cable and connector items fall under the general HS chapters for insulated conductors and connector units but no specific codes are listed.

What packaging formats are typical for these items?

In the industry, UTP and CAT6 cables are usually shipped on reels of 100 m or in bulk cartons, while keystone jacks are packed in cartons of 500‑1000 units. Container loading follows standard 20‑ft or 40‑ft container dimensions.

What documentation should a buyer request before placing an order?

Buyers should ask for a product data sheet, TIA/EIA performance test report, material composition certificate (copper purity or CCA ratio), fire‑rating certification, and any applicable regulatory compliance documents such as CE or RoHS.

What are typical lead times and minimum order quantities?

Typical lead times for Chinese telecom cable exporters are 30‑45 days after order confirmation. Minimum order quantities often start at 500 m of cable or 1 000 connector units, depending on the specific product.

Which markets most commonly import these types of telecom cables and connectors?

Major import markets include the United States, European Union countries, Japan, South Korea and several Southeast Asian nations, where the products are used for data center, enterprise networking and building‑integrated cabling projects.