About Shanghai Ok Solenoid Valve Manufacture Co., Ltd. - Industrial Valves & Gauges Supplier in China

Shanghai Ok Solenoid Valve Manufacture Co., Ltd. is based in Shanghai, China and currently lists six distinct solenoid valve models in its catalogue. The active product count of six includes the models OK62A, OK87, OK51, OKU68, OKW23, and the BAA/BAC series, all classified under the Industrial Valves & Gauges category. Each entry is identified only by its model code without additional descriptive titles. The company’s catalogue focuses exclusively on solenoid valve types used in industrial automation. The listed products are intended for integration into pneumatic or hydraulic circuits where precise flow control is required.

Product Range and Specialties of Shanghai Ok Solenoid Valve Manufacture Co., Ltd.

Solenoid valves in the industrial sector are commonly produced to IEC 60534‑2‑1 standards and are often supplied with CE marking for EU markets. Buyers typically encounter pressure classes up to PN16 (1.6 MPa) and temperature classes up to T2 (140 °C) for stainless‑steel bodies. Common body materials include brass (Cu‑Zn alloy) and stainless‑steel grades 304/316, while seals are usually made from NBR or EPDM. Standard coil ratings cover 12 VDC, 24 VDC, 110 VAC and 220 VAC, with power consumption between 2 W and 12 W depending on voltage. Units are generally packed in wooden crates with each valve protected by anti‑corrosion film.

Trade and Export Information - Shanghai Ok Solenoid Valve Manufacture Co., Ltd.

China ranks among the top global exporters of industrial valves, with the majority of shipments destined for Southeast Asia, the European Union, the United States and the Middle East. Export logistics for solenoid valves typically use 20‑foot containers, which can accommodate roughly 2,000 units depending on packaging density. Buyers often require compliance documents such as a CE Declaration of Conformity, ISO‑9001 quality system certificates and pressure‑test reports before customs clearance. Freight terms commonly employed are FOB Shanghai or CIF destination port, and the products are usually placed on wooden pallets and shrink‑wrapped to protect against moisture during transit.

Sourcing from Shanghai Ok Solenoid Valve Manufacture Co., Ltd. - Buyer Guidance

When sourcing solenoid valves from this supplier, buyers should request a detailed product datasheet that specifies coil voltage, pressure rating, material construction and seal type. A CE test report or equivalent third‑party certification should be obtained to verify conformity with IEC standards, and material certificates for brass or stainless‑steel bodies are advisable. Pressure‑test certificates at the rated working pressure are standard verification documents. Minimum order quantities for Chinese valve manufacturers often start at 100 pieces per model, with typical lead times of 30‑45 days after order confirmation. Samples can be ordered to assess coil response time and sealing performance before committing to larger volumes.

What product codes are listed in the catalogue?

The catalogue lists six models: OK62A, OK87, OK51, OK68, OKW23, and the BAA/BAC series. Each code represents a distinct solenoid valve configuration offered by the supplier. Buyers should refer to the individual datasheets for technical details of each model.

Which industry standards are typically applicable to these solenoid valves?

Industrial solenoid valves are generally designed to IEC 60534‑2‑1 for flow‑control devices. Suppliers often provide CE marking or equivalent certification to demonstrate compliance with this standard. Buyers should confirm the specific standard referenced on the product datasheet.

What materials are commonly used for the valve bodies?

Typical body materials include brass (a copper‑zinc alloy) and stainless‑steel grades 304 or 316. Seal materials are frequently NBR or EPDM, selected for resistance to oil and water. Material certificates can verify the exact composition of each valve.

What coil voltage options are available for these valves?

Standard coil voltages include 12 VDC, 24 VDC, 110 VAC and 220 VAC. Power consumption usually ranges from 2 W to 12 W depending on the voltage and coil design. The specific voltage for each model is detailed in the supplier’s technical sheet.

What documentation should a buyer request before purchasing?

Buyers should obtain a product datasheet, a CE Declaration of Conformity or comparable test report, material certificates for the body, and a pressure‑test certificate at the rated working pressure. These documents confirm compliance with safety and performance standards. Requesting the latest versions ensures up‑to‑date verification.

What are the typical minimum order quantity and lead time?

Minimum order quantities often start at 100 units per model for Chinese valve manufacturers. Lead times are generally 30‑45 days after order confirmation, depending on production scheduling and required certifications. Larger orders may benefit from consolidated shipping.

How are the valves packaged for international shipment?

The valves are normally packed in wooden crates or on pallets, with each unit wrapped in anti‑corrosion film. Shrink‑wrap is applied to protect the packaging from moisture during transit. This packaging approach meets standard export requirements for industrial components.