About Shandong Fine Steel Supply Chain Co,. Ltd. - Steel Plates Supplier in China

China‑based Shandong Fine Steel Supply Chain Co,. Ltd. lists six active products, all within the steel plate segment. The catalogue comprises a generic NM series steel plate, an in‑stock plate with thickness options, abrasion‑resistant plates ranging from 20 mm to 100 mm, a high‑strength wear‑resistant plate family, a high‑strength low‑alloy (HSLA) plate, and a China‑specific NM series wear plate. Each entry is linked to either HS code 7208.51 for carbon and wear‑resistant steel plates or HS code 7225.40 for HSLA plate grades such as A572 Gr.50, A588 or S355. The material descriptions reference carbon steel Q345, wear‑resistant grades NM400‑NM650 and HSLA grades commonly used in structural and heavy‑equipment applications.

The supplier’s top categories include Steel Plates, Agriculture and general Steel, but the detailed product list focuses on plate forms. The HS‑code families indicate that the products fall under the global tariff headings for hot‑rolled carbon steel plates (7208) and for other alloy steel plates (7225). Thickness options and wear‑resistant specifications are explicitly mentioned, providing buyers with clear technical identifiers for each steel type.

Product Range and Specialties of Shandong Fine Steel Supply Chain Co,. Ltd.

The catalogue offers carbon steel Q345 plates, wear‑resistant plates equivalent to NM400‑NM650, and HSLA plates meeting A572 Gr.50, A588 or S355 standards. In the industry, wear‑resistant plates are often classified by the NM scale, where NM400 typically provides a Brinell hardness of 400 HB and tensile strength around 1 200 MPa, while NM650 reaches 650 HB and 1 500 MPa. HSLA plates such as A572 Gr.50 are specified to a minimum yield strength of 345 MPa and ultimate strength of 450 MPa, conforming to ASTM A572 or EN 10025‑2. Typical thickness ranges for these plates run from 5 mm up to 200 mm, and widths are commonly 1 200 mm or 1 500 mm. Buyers often request plates in cut‑to‑size lengths of 2 400 mm or 3 000 mm, and surface conditions include mill‑finished, pickled‑and‑oiled, or shot‑peened for abrasion resistance.

Trade and Export Information - Shandong Fine Steel Supply Chain Co,. Ltd.

China is one of the world’s largest exporters of carbon and alloy steel plates, with shipments regularly directed to Southeast Asia, the Middle East, Europe and North America. HS code 7208.51 covers hot‑rolled carbon steel plates and strips, while 7225.40 covers other alloy steel plates; both codes are subject to standard customs valuation and anti‑dumping investigations in major markets. Importers typically require mill test certificates (MTC), compliance with ISO 9001 quality management systems, and, where applicable, CE marking for structural steel used in the EU. Packaging for plates of the sizes listed is usually on wooden pallets, wrapped in shrink film, and loaded into 20 ft or 40 ft containers; heavier bundles may be shipped on open‑deck vessels. Common Incoterms are FOB Shanghai or CIF destination port, with buyers arranging inland transport after discharge.

Sourcing from Shandong Fine Steel Supply Chain Co,. Ltd. - Buyer Guidance

When sourcing from Shandong Fine Steel, request the mill test certificate for each grade (e.g., NM400, A572 Gr.50) to verify chemical composition and mechanical properties. Ask for a third‑party test report confirming hardness, tensile strength and impact energy, especially for wear‑resistant plates used in mining or construction equipment. Verify that the supplier can provide ISO 9001 certification and, if the destination market requires, CE conformity or ASTM standard compliance documents before confirming the order. Confirm packaging dimensions, pallet weight limits and container loading plans to avoid freight discrepancies, and request a sample cut‑to‑size if tolerance verification is critical.

What steel grades are included in the NM series offered by Shandong Fine Steel?

The NM series includes wear‑resistant grades NM360, NM400, NM450, NM500, NM550, NM600 and NM650, each defined by Brinell hardness values ranging from 360 HB to 650 HB and corresponding tensile strengths up to about 1 500 MPa.

Which HS codes apply to the listed steel plates?

All carbon and wear‑resistant plates are classified under HS code 7208.51, while the high‑strength low‑alloy (HSLA) plates fall under HS code 7225.40.

What material standards correspond to the HSLA plate offering?

The HSLA plates match international standards such as ASTM A572 Gr.50, ASTM A588 or EN 10025‑2 S355, which specify minimum yield strength of 345 MPa and a typical ultimate strength of 450 MPa.

How can I verify the mechanical properties of the abrasion‑resistant plates?

Request a mill test certificate and, where possible, an independent hardness test report showing Brinell hardness and tensile test results that align with the NM grade specifications.

What packaging and shipping formats are used for the steel plates?

Plates are typically bundled on wooden pallets, wrapped in shrink film, and loaded into standard 20 ft or 40 ft containers. Heavy bundles may be secured with straps and loaded on open‑deck vessels for oversized shipments.

Which documents should I ask for before placing an order?

Ask for the mill test certificate, ISO 9001 quality management certification, any required CE or ASTM conformity statements, and a packing list indicating pallet dimensions and container load plan.

What are the typical lead times for these steel plate products?

Lead times generally range from 15 to 30 days after order confirmation, depending on the specific grade, thickness and any required surface treatment.

Are the steel plates suitable for structural applications in Europe?

The HSLA plates conform to A572 Gr.50/A588/S355 standards, which are accepted for structural use in the EU, provided the buyer obtains the required CE declaration of conformity and relevant test reports.