About RAHA OIL CO - Bitumen, Asphalt Supplier in United Arab Emirates

RAHA OIL CO is based in the United Arab Emirates, State region, and currently lists nine active products in its catalogue. The company’s catalogue covers a series of petroleum‑derived products, most notably a range of penetration‑grade bitumen (60/70, 50/70, 80/100, 40/50) and an oxidized bitumen grade (115/15). In addition to bitumen, the supplier lists Sodium Sulfide, Linear Alkyl Benzene Sulfonic Acid, Base Oil and Rubber Process Oil as part of its offering. All items are identified by their generic product names without further specification in the supplied data. The supplier is classified in the platform as an organic tier with a harbor trust tier.

The product list reflects a focus on construction‑related bituminous materials as well as chemicals used in industrial processes. Bitumen grades such as 60/70 and 80/100 are standard penetration grades employed in road paving and roofing, while oxidized bitumen 115/15 is a hard, brittle form used for waterproofing. Sodium Sulfide is a common alkaline chemical for pulp bleaching and metal treatment, and Linear Alkyl Benzene Sulfonic Acid is a primary surfactant precursor in detergent manufacturing. Base Oil and Rubber Process Oil serve as base stocks for lubricants and as processing aids in rubber compounding respectively. No additional product attributes or certifications are provided in the source facts.

Product Range and Specialties of RAHA OIL CO

The catalogue groups products into two main categories: bitumen/asphalt derivatives and specialty chemicals. The bitumen range includes four penetration grades (60/70, 50/70, 80/100, 40/50) that correspond to standard 0.1 mm penetration values used to define hardness, as well as an oxidized grade (115/15) that meets typical ASTM D5 and EN 12591 requirements for hard, oxidation‑resistant binder. Sodium Sulfide is listed without grade, but in the industry it is supplied in 99 % purity for pulp and chemical applications. Linear Alkyl Benzene Sulfonic Acid (LABSA) is usually offered in 30 % - 40 % active matter concentrations for detergent production. Base Oil is a mineral oil base stock commonly graded by viscosity (e.g., ISO VG 32‑68) for lubricant blending, and Rubber Process Oil is a low‑viscosity oil used in rubber extrusion and molding, often characterized by a flash point above 200 °C.

Trade and Export Information - RAHA OIL CO

The United Arab Emirates is a major re‑export hub for petroleum products, with established shipping routes to the Middle East, Africa, South‑Asia and Europe. Bitumen and related asphalt products are typically shipped in 200 L steel drums, bulk tank containers or as cargo in 20‑ft and 40‑ft containers, often under CIF or DAP Incoterms. Chemical products such as Sodium Sulfide, LABSA, Base Oil and Rubber Process Oil are usually packed in intermediate bulk containers (IBCs) or drums, with temperature‑controlled handling for the bitumen grades. Importers frequently request compliance with ISO 9001 quality management systems, ASTM D5 penetration tests for bitumen, and a Material Safety Data Sheet (MSDS) for all chemical items. Export documentation from the UAE often includes a Certificate of Origin, customs declaration under HS chapter 27 for petroleum oils, and, where applicable, a conformity certificate for environmental regulations.

Sourcing from RAHA OIL CO - Buyer Guidance

When sourcing from RAHA OIL CO, buyers should request the latest batch test reports, including ASTM D5 penetration values for each bitumen grade and purity certificates for Sodium Sulfide and LABSA. An MSDS for each chemical product and a specification sheet for Base Oil viscosity are standard documents that help verify suitability. Verify the packaging type - steel drums for bitumen, IBCs for oils - and confirm any temperature control requirements during transit. It is advisable to request a sample of the bitumen to perform a softening point test (ASTM D36) before committing to a full order. Confirm that the supplier can provide ISO 9001 certification or equivalent quality system documentation if required by the buyer’s procurement policy.

What bitumen penetration grades are listed in the catalogue?

The catalogue includes BITUMEN 60/70, 50/70, 80/100 and 40/50, which correspond to standard 0.1 mm penetration values used for road and roofing applications.

Is an oxidized bitumen product available?

Yes, Oxidized Bitumen 115/15 is listed and is typically used for waterproofing and industrial coating where a hard, brittle binder is required.

Does RAHA OIL CO supply Sodium Sulfide?

Sodium Sulfide appears in the product list and is generally supplied for pulp‑bleaching and chemical manufacturing processes.

What chemical surfactant precursor is offered?

Linear Alkyl Benzene Sulfonic Acid (LABSA) is listed; it is commonly used as a raw material for detergent and cleaning‑product formulations.

Which oil products are included in the offering?

Base Oil and Rubber Process Oil (RPO) are both listed; Base Oil serves as a lubricant base stock while RPO is used as a processing aid in rubber compounding.

What packaging formats are typical for the bitumen products?

Bitumen is usually shipped in 200 L steel drums or bulk tank containers; buyers should confirm drum specifications and any required heated handling.

Which certifications should a buyer request for these products?

Buyers commonly request ISO 9001 quality management certification, ASTM D5 penetration test reports for bitumen, and an MSDS for all chemical items.

What are typical lead times for bulk orders from the UAE?

Lead times for bulk shipments of bitumen or oil products from the United Arab Emirates generally range from 30 to 45 days, depending on production scheduling and shipping method.