About PT Multi Indowood - Wooden Furniture Supplier in Indonesia

Indonesia is the origin country for PT Multi Indowood, which currently lists seven active wooden‑furniture items in its catalogue. The supplier’s catalogue is limited to a single primary category - wooden furniture - and each entry is identified by a product name rather than technical specifications. The listed items comprise a mixture of shelving units, tables and storage pieces, all falling under the broader furniture HS chapter 94 classification. No material grades, dimensions or finish details are provided in the source data. Buyers seeking detailed product data must request additional information from the supplier.

The product names include the Bohemian series (3‑Shelf, 4‑Shelf and 5‑Shelf units) and the Stora series (End Table, Side Board, TV Unit and Coffee Table). Each name suggests a functional type - shelves for storage, tables for surface use, and a TV unit for media equipment - but the catalogue does not disclose size, weight or wood species. The Bohemian items are described only by shelf count, while the Stora items are distinguished by their intended placement in a living space. No HS codes are attached to individual products in the source data. The supplier’s active product count of seven reflects the current scope of its online listing.

Product Range and Specialties of PT Multi Indowood

The catalogue presents eight distinct product titles, grouped into two design lines. The Bohemian line offers three modular shelving units with three, four or five adjustable shelves, while the Stora line provides an end table, a side board, a television unit and a coffee table. All items are categorized as wooden furniture, which in international trade typically includes solid wood, engineered wood (such as particleboard or MDF) and veneer‑finished panels. Buyers often encounter grades such as First and Second Selection (FAS, SS) for solid timber, and density specifications for engineered boards measured in kg/m³. Common finish options include clear lacquer, polyurethane, or melamine coating, each affecting durability and moisture resistance.

In the global wooden‑furniture market, buyers frequently require specifications on dimensions (length, width, height in mm), load‑bearing capacity (kg per shelf), surface finish (gloss level, UV‑cured), and moisture content (typically below 12 %). Standard industry drawings list shelf spacing, overall footprint and edge banding details. When sourcing from Indonesian manufacturers, it is customary to verify the wood species (e.g., teak, mahogany, rubberwood) and any treatment for pest resistance. These parameters help align the supplier’s offerings with the technical expectations of retailers and contract furniture projects.

Trade and Export Information - PT Multi Indowood

Indonesia ranks among the top exporters of wooden furniture, with the majority of shipments classified under HS chapter 94 (Furniture; wood). Primary destination regions include North America, the European Union, Japan and the Middle East, where demand for solid‑wood and engineered‑wood pieces remains strong. Export logistics typically involve 20‑ft or 40‑ft containers, with items packed in wooden crates or reinforced cardboard to protect against humidity and handling damage. Customs documentation often references the HS‑6 code 9403.20 for wooden chairs and 9403.30 for other wooden furniture, though exact sub‑headings depend on the product’s design and material composition.

Buyers importing Indonesian wooden furniture usually request certifications such as FSC (Forest Stewardship Council) for sustainable sourcing, ISO 9001 for quality management, and compliance with the EU REACH regulation for chemical safety. Inspection agencies may perform pre‑shipment checks on dimensions, finish quality and moisture content. Standard Incoterms for the sector are FOB (Free on Board) Indonesian ports such as Jakarta or Surabaya, with subsequent freight to the buyer’s destination. Packaging norms favor shrink‑wrapped units inside bulk crates, allowing efficient loading and unloading at the destination port.

Sourcing from PT Multi Indowood - Buyer Guidance

When evaluating PT Multi Indowood’s offerings, buyers should request a material data sheet that confirms wood species, density, and moisture content, ideally below 12 % to avoid warping. Test reports covering load‑bearing capacity for shelves and tables, as well as finish durability (e.g., abrasion resistance measured in Taber cycles), are standard documents in furniture procurement. Verification of any sustainability claims through FSC certificates or equivalent should be obtained before confirming an order.

Sample requests are common for furniture lines; a single unit of each model can be shipped in a small crate for dimensional and finish verification. Minimum order quantities (MOQ) for Indonesian wooden furniture often start at one container load, but suppliers may accommodate smaller batches if packaging and logistics are adjusted. Lead times typically range from 30 to 60 days from order confirmation, depending on material availability and finishing processes. Buyers should confirm packaging details, container loading plans and the chosen Incoterm to align with their supply‑chain schedule.

What types of wooden furniture does PT Multi Indowood list?

The supplier lists seven items under the wooden‑furniture category, including three Bohemian shelving units (3‑, 4‑ and 5‑shelf), and four Stora pieces: an end table, a side board, a TV unit and a coffee table.

Are material specifications such as wood species or density provided?

The catalogue does not include material specifications. Buyers should request a data sheet that states the wood species, density (kg/m³) and moisture content for each item.

Which HS codes are likely applicable to these products?

Wooden furniture generally falls under HS chapter 94, with sub‑headings such as 9403.20 for chairs and 9403.30 for other wooden furniture items. Exact codes depend on the final design and material composition.

What certifications are typically required for Indonesian wooden furniture?

Importers often request FSC certification for sustainable sourcing, ISO 9001 for quality management, and compliance with EU REACH for chemical safety. PT Multi Indowood has not listed any certifications, so buyers should ask for them.

How are the products usually packaged for export?

Standard practice is to pack each piece in a wooden crate or reinforced cardboard, with shrink‑wrap protection, to prevent damage from humidity and handling during container transport.

What are typical minimum order quantities and lead times?

MOQ for Indonesian furniture exporters commonly starts at one full container (20 ft or 40 ft). Lead times are usually 30 - 60 days from order confirmation, depending on finishing and material availability.

Can I request a sample before placing a full order?

Yes, a single unit of each model can be shipped as a sample in a small crate for dimensional and finish evaluation before a larger purchase is arranged.

Which markets commonly import wooden furniture from Indonesia?

Key import markets include the United States, the European Union, Japan and the Middle East, where buyers seek both solid‑wood and engineered‑wood pieces for residential and contract projects.