About Padmavati Steel And Engg Co. - Stainless Steel Sheets Supplier in India

India hosts Padmavati Steel And Engg Co., which currently lists six active products covering stainless steel sheets and coils, titanium plate and coils, and nickel coils. The catalogue records Stainless Steel 316 Coils (HS 7219.31, austenitic Cr‑Ni‑Mo alloy), SS 321/321H Sheets & Plates (HS 7219.32, titanium‑stabilized austenitic), Titanium Grade 5 Coils (HS 8108.20, Ti‑6Al‑4V alloy), generic SS Sheets & Plates (HS 7219.31, grades 304, 316, 321), Stainless Steel 321/321H Sheets & Plates (HS 7219.31) and Nickel 201 Coils (HS 7506.20, low‑carbon nickel with ≥99 % Ni).

The six entries fall under three HS‑code families: 7219 for stainless‑steel sheet and coil products, 8108 for titanium alloy coils, and 7506 for nickel alloy coils. Each entry specifies the material composition, allowing buyers to match chemical and mechanical requirements directly from the catalogue without additional inference.

Product Range and Specialties of Padmavati Steel And Engg Co.

The stainless‑steel portfolio includes grades 304, 316, 321 and 321H in sheet, plate and coil forms. Typical industry specifications follow ASTM A240/A276 or EN 10088, with thicknesses from 0.4 mm to 40 mm, surface finishes ranging from 2B to mirror‑polished, and tensile strengths of 520 - 720 MPa for grade 316. Titanium Grade 5 (Ti‑6Al‑4V) coils are supplied in standard widths of 800 - 1200 mm, thicknesses 0.5 - 6 mm, and meet ISO 5832‑1 requirements for aerospace and medical alloys. Nickel 201 coils are offered with a minimum purity of 99 % Ni, carbon ≤0.02 %, and are commonly supplied to meet ASTM B466 for high‑temperature and corrosion‑resistant applications.

Trade and Export Information - Padmavati Steel And Engg Co.

India ranks among the top global exporters of stainless‑steel, titanium alloys and nickel, with major ports such as Mumbai, Chennai and Kolkata handling bulk shipments. Buyers in the Middle East, Europe (particularly Germany, Italy and the UK), the United States and Southeast Asia regularly import HS 7219 stainless‑steel products, HS 8108 titanium, and HS 7506 nickel under FOB or CIF terms. Commonly required certifications include mill test reports (MTR), compliance with ASTM, EN or ISO standards, and, where applicable, CE marking for European markets. Typical packaging involves coil bundles wrapped in protective film and secured on wooden pallets, while sheets and plates are crated in timber or bulk‑bag containers; container loads often fill 20‑ft or 40‑ft units depending on product thickness and coil diameter.

Regulatory checks for these categories frequently involve chemical analysis certificates, tensile test reports, and, for titanium, certification under the aerospace‑specific AMS specifications. Importing countries may request additional documentation such as REACH registration for nickel or corrosion‑resistance test data for stainless steel, especially for projects in the oil‑&‑gas or chemical processing sectors.

Sourcing from Padmavati Steel And Engg Co. - Buyer Guidance

When sourcing stainless‑steel sheets or coils, request the mill test report, a chemical composition certificate and a tensile test result that references the relevant ASTM or EN grade. For titanium Grade 5 coils, ask for the ISO 5832‑1 certification, a heat‑treatment record and dimensional tolerance data (typically ±0.2 mm). Nickel 201 coils should be accompanied by a purity certificate, carbon content analysis and a corrosion‑resistance test report. Verify that the HS code on the commercial invoice matches the catalogue entry (7219.31, 7219.32, 8108.20 or 7506.20) to avoid customs delays. Typical minimum order quantities range from 5 metric tonnes for stainless‑steel sheets to 2 metric tonnes for titanium coils, with lead times of 4 - 6 weeks after order confirmation, subject to steel mill production schedules.

Before finalising a purchase, confirm the export packaging method (e.g., wooden crate, bulk bag) and ensure that the supplier can provide the required Incoterm documentation. Request a pre‑shipment inspection report if the buyer’s market mandates third‑party verification, and compare the supplier’s sample results against the specified grade standards to validate compliance.

What grades of stainless steel are listed in the catalogue?

The catalogue lists stainless‑steel grades 304, 316, 321 and 321H in sheet, plate and coil forms, each identified under HS 7219.31 or HS 7219.32.

Which HS codes correspond to the titanium and nickel products?

Titanium Grade 5 coils are classified under HS 8108.20, while Nickel 201 coils use HS 7506.20.

What standard certifications should a buyer request for stainless‑steel sheets?

Buyers should request an ASTM A240 or EN 10088 mill test report, a chemical composition certificate and a tensile strength test result.

Are sample pieces available for titanium Grade 5 coils?

Yes, suppliers typically provide a small coil sample (e.g., 0.5 m length) together with the ISO 5832‑1 certification and a heat‑treatment record.

What is the typical minimum order quantity for stainless‑steel coils?

Minimum order quantities are generally around 5 metric tonnes per grade, though exact figures depend on coil width and thickness.

Which packaging method is used for stainless‑steel sheets during export?

Sheets are usually packed in timber crates or bulk‑bag containers, wrapped in protective film and secured on wooden pallets for container loading.

What documentation is needed for customs clearance of nickel 201 coils?

Customs typically require the commercial invoice with HS 7506.20, a mill test report showing ≥99 % Ni purity, and any applicable REACH or environmental compliance certificates.

Which markets most frequently import the listed products from India?

Key import markets include the United Arab Emirates, Germany, the United States and Japan, especially for stainless‑steel and titanium used in construction, automotive, aerospace and petrochemical applications.