About Normandy Steel Industry Co., Ltd - Stainless Steel Supplier in China

Based in China, Normandy Steel Industry Co., Ltd currently lists five active products across the stainless‑steel flat‑product segment. The catalogue includes stainless‑steel coils and sheets that fall under HS Chapter 72, specifically codes 7219.31 for alloy‑specific coils and 7219.12 for general stainless‑steel flat products. The products are described by material grade, such as stainless‑steel 304/316, as well as grades 201, 410 and 430, which are standard austenitic and ferritic classifications used in many industrial applications. The supplier’s top categories are identified as Stainless Steel Coils and Stainless Steel Plates, reflecting the focus on rolled flat stock.

The five listed items comprise a standard stainless‑steel coil, a multi‑grade coil covering grades 201, 410 and 430, a SUS304 coil, a stainless‑steel sheet (304/316) and a cold‑rolled coil covering grades 304, 316 and 430. Each entry references the same HS code families, indicating that the products are classified as flat‑rolled stainless‑steel products without further processing. The material descriptions follow recognized industry terminology, citing Cr‑Ni austenitic grades and ferritic grade 430. No additional processing such as pickling, annealing or coating is mentioned in the supplied data.

Product Range and Specialties of Normandy Steel Industry Co., Ltd

Normandy Steel’s catalogue concentrates on flat‑rolled stainless‑steel products, primarily coils and sheets that are supplied in standard widths and thicknesses used for fabrication. In the broader market, stainless‑steel coils are typically offered in thicknesses from 0.2 mm to 6 mm, widths of 1000 mm to 1500 mm, and are finished either hot‑rolled or cold‑rolled depending on the grade. Common specifications for the grades listed include ASTM A240 for plate and sheet, EN 10088‑2 for stainless‑steel flat products, and JIS G4305 for cold‑rolled coil. Buyers often request material certifications that confirm compliance with these standards, as well as chemical composition limits such as ≤0.08 % carbon for 304 and ≤0.15 % carbon for 316. Typical surface conditions range from mill‑finish (no further treatment) to pickled‑and‑oiled, which affect subsequent forming or welding processes.

Trade and Export Information - Normandy Steel Industry Co., Ltd

China remains one of the largest exporters of stainless‑steel flat products, with shipments primarily destined for automotive manufacturers in Europe, construction and appliance makers in North America, and food‑processing equipment suppliers in Southeast Asia. The HS codes 7219.12 and 7219.31 capture austenitic and ferritic stainless‑steel coils and sheets, and customs authorities frequently require accompanying mill test certificates and, where applicable, CE or RoHS declarations. Buyers usually request compliance with ISO 9001 quality‑management systems and product standards such as ASTM A240 or EN 10088, although these certifications must be verified per transaction. Export logistics typically involve bundling coils on steel frames, palletising sheets, and loading into 20‑foot or 40‑foot containers; common Incoterms are FOB Shanghai or CIF destination port, reflecting standard maritime routes from Chinese coastal ports to global markets.

Sourcing from Normandy Steel Industry Co., Ltd - Buyer Guidance

When sourcing stainless‑steel coil or sheet from Normandy Steel, buyers should obtain a mill test certificate that details chemical composition, tensile strength, elongation and hardness, aligned with ASTM A240 or EN 10088 requirements. Requesting a sample cut to the intended thickness can verify surface finish and flatness before committing to larger volumes. Because the supplier lists both hot‑rolled and cold‑rolled grades, confirm the required processing state and any subsequent coating, as these affect downstream fabrication. Typical minimum order quantities for flat‑rolled stainless products range from 1 tonne to 5 tonnes, with lead times of 30‑45 days after order confirmation, subject to steel mill production schedules.

What stainless‑steel grades does Normandy Steel list in its catalogue?

The catalogue includes stainless‑steel 304, 316, 201, 410 and 430, offered as coils and sheets under HS codes 7219.12 and 7219.31.

Which HS codes are associated with the listed products?

Coils of specific alloy composition use HS code 7219.31, while general stainless‑steel flat products, including sheets and cold‑rolled coils, use HS code 7219.12.

What standards are typically applied to these stainless‑steel products?

Common standards are ASTM A240 for plate and sheet, EN 10088‑2 for flat‑rolled stainless steel, and JIS G4305 for cold‑rolled coils.

What documentation should a buyer request before purchasing?

Buyers should request a mill test certificate, chemical analysis report, and compliance statements for ISO 9001, CE or RoHS if required by the destination market.

What are the usual packaging and shipping methods for these flat products?

Products are usually bundled on steel frames or palletised, then loaded into 20‑foot or 40‑foot containers; FOB Shanghai and CIF are the most common Incoterms.

What typical minimum order quantity and lead time apply?

Minimum orders generally start at 1 tonne, with a production and delivery lead time of roughly 30‑45 days after order confirmation.

How can a buyer verify the material grade before a full order?

Requesting a small sample cut to the intended thickness allows verification of grade, surface finish and dimensional tolerance prior to larger shipments.

Are there any common certifications buyers should verify for Chinese stainless‑steel exporters?

Buyers commonly verify ISO 9001 quality‑management certification and product‑specific standards such as ASTM A240 or EN 10088, and may also require CE marking for EU destinations.