About "MaksDecor", LLC - Coatings Supplier in Russian Federation

The Russian Federation supplier “MaksDecor”, LLC is located in Moscow and currently lists five active decorative coating products. The catalogue includes multicolor, sandy, silky, and relief coatings classified under HS code 3208.90, as well as Venetian plasters under HS code 3214.90. Each product is described by its base material - ranging from polyester/polyurethane resin blends with metallic pigments to water‑based acrylic‑polyurethane formulations and lime‑putty mixes with marble dust. The company groups these items under broad categories such as Coatings, Paints & Coatings, Plastic Coating and Metal Coatings, reflecting the diversity of decorative finishes it offers.

In the catalogue, multicolor coatings are polyester/polyurethane resin based with metallic pigments, while sandy coatings use a synthetic polymer matrix enriched with mineral additives. Silky coatings are water‑based acrylic‑polyurethane blends, and relief coating is a polymer‑based textured system containing mineral fillers. Venetian plasters are lime‑putty compositions with marble dust and natural pigments. All four polymer‑based products fall under HS chapter 32 heading 3208.90 (other paints, varnishes and similar coatings), and the plaster product is recorded under HS heading 3214.90 (pre‑made plaster).

Product Range and Specialties of "MaksDecor", LLC

"MaksDecor" provides decorative coatings that are typical of the interior finish market. Multicolor and sandy variants usually target premium decorative projects and often meet VOC limits of 150 g L‑1 or lower, while silky and relief coatings are formulated for smoother application and may be offered in 0.5 mm to 2 mm dry film thickness. Venetian plasters, classified under HS 3214.90, are traditionally supplied in 20 kg or 25 kg sacks and conform to standards for lime‑based plasters such as EN 998‑2. Industry buyers commonly request data on pigment load (e.g., % metallic pigment), resin type (polyester vs polyurethane), and water‑solids content for water‑based blends.

Trade and Export Information - "MaksDecor", LLC

Exporters of decorative paints and plasters from the Russian Federation typically serve construction and interior‑design markets in the EU, the Middle East, and CIS countries. HS code 3208.90 products are shipped in 20 ft containers with 1 000 L drums or 25 kg metal cans, while HS 3214.90 plasters are packed in bulk sacks. Buyers frequently require compliance with REACH registration, ISO 9001 quality management, and VOC‑related certifications such as EU Regulation EU 2019/1021. Standard Incoterms for these goods are FOB Moscow or CIF destination port, with moisture content checks (≤ 5 %) and pH testing (for plasters) performed before loading.

Sourcing from "MaksDecor", LLC - Buyer Guidance

When sourcing from “MaksDecor”, buyers should request a technical data sheet that details resin composition, pigment concentration, VOC content and recommended substrate preparation. A safety data sheet (SDS) complying with GHS is essential for all polymer‑based coatings, and for the Venetian plaster an SDS covering lime alkalinity and dust protection is standard. Sample sizes of 0.5 L for liquid coatings and a 5 kg sack for plaster allow verification of colour, viscosity and drying time. Verify that the supplier can provide REACH registration numbers, ISO 9001 certification copies, and third‑party test reports for film thickness, adhesion (ASTM D3359) and abrasion resistance (ASTM D4060).

What product categories does "MaksDecor" list in its catalogue?

The catalogue includes four polymer‑based decorative coatings (multicolor, sandy, silky and relief) under HS 3208.90 and one lime‑based Venetian plaster under HS 3214.90.

Which HS codes apply to the listed products?

All four liquid coatings use HS code 3208.90 (other paints, varnishes and similar coatings) and the Venetian plaster is classified under HS code 3214.90 (pre‑made plaster).

What base materials are used for the multicolor and sandy coatings?

Multicolor coatings are based on a polyester/polyurethane resin system with metallic pigments; sandy coatings use a synthetic polymer matrix combined with metallic and mineral additives.

What typical certifications should a buyer request for these decorative coatings?

Buyers should ask for REACH registration, ISO 9001 quality‑management certification, and VOC compliance certificates relevant to the destination market.

What are common packaging formats for the polymer‑based coatings?

These coatings are typically supplied in 20 ft containers packed as 1 000 L steel drums or 25 kg metal cans, sealed to protect against moisture.

What documentation is needed before placing an order for the Venetian plaster?

A technical data sheet, safety data sheet, REACH registration, and test reports for pH, compressive strength and dry film thickness are standard requirements.

What are typical minimum order quantities (MOQ) for these products?

Polymer‑based coatings often have an MOQ of one 20 ft container (≈ 20 000 L), while Venetian plaster is commonly ordered in multiples of 20 kg sacks, with a practical MOQ of 200 kg.

Which regions commonly import decorative coatings from Russia?

The main import regions are the European Union, the Middle East, and neighboring CIS countries, where the products are used for residential, commercial and hospitality interior projects.