About Jiangxi Kelley Chemical Packing Co., Ltd. - Packaging Items & Containers Supplier in China

Jiangxi Kelley Chemical Packing Co., Ltd. is based in China and currently lists five distinct products in its catalogue. All items fall under the “Packaging Items & Containers” category, which covers equipment used for process fluid handling and separation. The catalogue includes a metal rasching ring tower packing, a plastic cascade mini ring, and three ceramic packing forms: an intalox saddle, a pall ring, and a cross ring. Each product is identified by its material type - metal, ceramic, or plastic - and is designed for use in industrial towers and columns. The supplier’s product count of five reflects a focused offering within structured packing solutions.

Metal rasching rings are typically fabricated from stainless steel or carbon steel and are rated for high temperature and pressure environments. Ceramic saddles, pall rings, and cross rings are commonly produced from high‑purity alumina or silicon carbide, providing chemical inertness and low pressure drop. Plastic cascade mini rings are usually made from PTFE or PFA, offering resistance to aggressive acids and bases. These packing elements are sized according to standard tower diameters, with typical heights ranging from 150 mm to 300 mm per element. The products are intended for integration into distillation, absorption, and stripping columns across petrochemical, fine chemicals, and pharmaceutical processing.

Product Range and Specialties of Jiangxi Kelley Chemical Packing Co., Ltd.

Jiangxi Kelley’s catalogue lists a metal rasching ring tower packing, a plastic cascade mini ring, and three ceramic packing items: an intalox‑type saddle, a pall ring, and a cross ring. The metal rasching ring is supplied in stainless‑steel grades such as 304 and 316, with tube diameters commonly 12 mm to 20 mm and a surface roughness suited to high‑efficiency mass transfer. The plastic cascade mini ring is offered in PTFE or PFA, typically in 30 mm to 50 mm diameters, providing a low‑density, high‑void‑fraction structure. Ceramic saddles, pall rings, and cross rings are manufactured from alumina or silicon carbide with purity levels of 99 % or higher, and are available in standard module sizes that match common column diameters.

In the structured‑packing market, buyers often specify pressure‑drop values (e.g., ≤ 0.12 m / m at 1 atm), mechanical strength (≥ 150 MPa for metal, ≥ 120 MPa for ceramic), and chemical compatibility charts. International standards such as ASTM A240 for stainless steel, ASTM C770 for ceramic packing, and ISO 9001 quality‑management systems are frequently required. Packings are shipped in wooden crates or bulk bags, with container loads typically fitting a 20‑ft container (≈ 1 000 kg of metal or ceramic units) or a 40‑ft container for plastic items.

Trade and Export Information - Jiangxi Kelley Chemical Packing Co., Ltd.

China is a major exporter of industrial packing, and products like metal rasching rings, ceramic saddles and plastic cascade rings are regularly shipped to Europe, North America, the Middle East, and Southeast Asia. The relevant HS‑code families include Chapter 73 for metal articles (e.g., 7318) and Chapter 69 for ceramic products (e.g., 6912), while plastic packing falls under Chapter 39. Buyers usually request compliance with CE marking for EU markets and may need material safety data sheets (MSDS) and third‑party test reports. Typical incoterms are FOB Shanghai or CIF destination port, with cargo packed in 20‑ft or 40‑ft containers and secured with dunnage to prevent breakage.

Export logistics from China often involve consolidation into standard containers, with metal and ceramic packings protected by foam or wooden pallets to mitigate impact. Inspection agencies such as SGS or Bureau Veritas commonly perform pre‑shipment checks on dimensions, material certification, and surface integrity. For bulk orders, buyers may negotiate bulk freight rates and arrange for port‑to‑door handling in target markets, while maintaining documentation like commercial invoices, packing lists, and certificates of origin.

Sourcing from Jiangxi Kelley Chemical Packing Co., Ltd. - Buyer Guidance

Prospective buyers should request material certificates that specify alloy grade for metal rings, ceramic composition, and polymer type for plastic rings. Test reports covering pressure‑drop, mechanical strength, and chemical resistance are standard verification documents, and a sample batch of 5 - 10 units is advisable for pilot testing. Verifying ISO 9001 certification or equivalent quality‑management system helps confirm consistent production quality.

Before placing a full order, confirm the dimensional tolerances (±0.5 mm for tube diameter, ±2 mm for overall height) and the packaging configuration (crate size, pallet pattern). Ensure that the supplier can provide CE or equivalent certification if the shipment is destined for the EU, and ask for a third‑party inspection report if required by the importing country’s customs. Clarifying lead time, which typically ranges from 30 to 45 days for metal and ceramic items and 20 to 35 days for plastic items, allows accurate production planning.

What types of materials are used for the metal rasching ring tower packing?

The metal rasching ring is normally fabricated from stainless‑steel grades such as 304 or 316, providing corrosion resistance and high‑temperature capability.

Which ceramic grades are available for the intalox saddle, pall ring, and cross ring?

Ceramic packings are offered in high‑purity alumina (≥ 99 %) or silicon carbide, both of which deliver excellent chemical inertness and mechanical strength.

What is the typical size range for the plastic cascade mini ring?

Plastic cascade rings are commonly produced in diameters between 30 mm and 50 mm, with a void fraction that supports low pressure drop in column applications.

Which certifications should a buyer request for these packing products?

Buyers should request material certificates, ISO 9001 quality‑management certification, and, for EU shipments, CE marking or an equivalent conformity assessment.

What are the usual packaging and shipping methods for these items?

Items are packed in wooden crates or bulk bags, loaded into 20‑ft or 40‑ft containers, and secured with dunnage to protect against impact during sea freight.

What documentation is required for customs clearance of packing items from China?

Standard documents include a commercial invoice, packing list, certificate of origin, material safety data sheet (MSDS), and any applicable third‑party inspection report.

What lead times can buyers expect for metal, ceramic, and plastic packings?

Lead times typically range from 30 - 45 days for metal and ceramic packings and 20 - 35 days for plastic cascade rings, depending on order size and production schedule.