About Jiangsu Jiayu New Power Technology Co., Ltd. - Automobile Bulbs, Lights & Lamps Supplier in China

Jiangsu Jiayu New Power Technology Co., Ltd. operates from Jiangsu province in China and currently lists five active products under the automobile bulbs, lights and lamps category. The supplier’s catalogue focuses on LED‑based lighting components that are used in vehicle lighting systems, ranging from standard daytime running lights to specialized signal modules. Each product is identified with a specific HS‑code, such as 8539.29 for the RS25‑39LED and 9405.40 for the RCANBUSBA9S‑2SMD, reflecting the electrical equipment and furniture classifications used in customs filings. The material composition disclosed includes semiconductor LED dies, aluminum heat sinks, polycarbonate housings and copper contacts, which are typical for high‑performance automotive LEDs. This factual snapshot does not include any company‑level claims beyond the listed product count and categories.

The five items in the catalogue are the RS25‑39LED (HS 8539.29), RCANBUSBA9S‑2SMD (HS 9405.40), Daytime light 150x30x35mm‑5050 (HS 8512.20), RT10‑1SMD (HS 8539.50) and RFESTOON‑6SMD (HS 8539.50). All of them are described as LED modules with variations in housing material - ranging from aluminum and polycarbonate to ABS plastics - and incorporate gallium‑based semiconductor dies. The listed HS codes place the products within the broader tariff headings for electronic lighting apparatus and assembled furniture parts, which are common for automotive lighting exports. No additional product families, such as headlamps or interior light strips, are indicated in the supplied data. The overview therefore remains strictly limited to the five LED‑type items that the supplier has made public.

Product Range and Specialties of Jiangsu Jiayu New Power Technology Co., Ltd.

The catalogue’s five entries cover a spectrum of automotive lighting solutions: a high‑power RS25‑39LED module, a CAN‑bus compatible RCANBUSBA9S‑2SMD unit, a compact daytime running light sized 150 × 30 × 35 mm using 5050 LEDs, the RT10‑1SMD single‑chip module, and the RFESTOON‑6SMD assembly. In the automotive LED market, such modules are typically offered in E‑mark or CE‑marked versions, with luminous flux values between 800 lm and 3000 lm, color temperatures from 3000 K to 6500 K, and IP ratings of IP65 or higher for exterior applications. Materials often include aluminum heat sinks for thermal management, polycarbonate or ABS housings for impact resistance, and copper lead frames for reliable electrical contact, matching the material list provided for each product.

Industry practice for automobile lighting modules also defines standard compliance with IEC 60598‑2‑37 and SAE J578 for forward‑facing lamps, as well as ECE R112 for rear‑facing lamps. Buyers normally evaluate parameters such as forward voltage, operating current, thermal resistance (°C/W), and dimming compatibility (PWM or CAN‑bus). The supplier’s product descriptions align with these typical specifications, allowing buyers to compare the listed LED modules against common automotive lighting grades such as “high‑beam” or “daytime running light” categories.

Trade and Export Information - Jiangsu Jiayu New Power Technology Co., Ltd.

China is a leading exporter of automotive LED lighting components, with shipments frequently directed to Europe, North America, the Middle East and Southeast Asian vehicle manufacturers. The HS‑code families represented - 8539 (electrical apparatus for lighting), 8512 (other lamps) and 9405 (other furniture parts) - are routinely inspected for compliance with RoHS, REACH and, where applicable, automotive E‑mark certifications. Export logistics from ports such as Shanghai or Ningbo typically use FOB or CIF terms, and products are packed in anti‑static bags inside double‑wall cardboard cartons to protect the semiconductor dies during sea freight.

Buyers importing these LED modules usually require documentation that includes a test report for IEC 60598‑2‑37 compliance, a RoHS declaration, and an EC type‑approval or E‑mark certificate for automotive use. Chinese exporters often provide a Certificate of Origin and a commercial invoice that references the HS codes listed above. Because the products are classified under electrical equipment, customs authorities may request a pre‑shipment inspection for conformity with safety standards, especially when the destination market enforces stringent automotive regulations.

Sourcing from Jiangsu Jiayu New Power Technology Co., Ltd. - Buyer Guidance

When sourcing from Jiangsu Jiayu New Power Technology Co., Ltd., buyers should request the latest RoHS test report, a CE/E‑mark declaration and photometric data sheets that specify luminous flux, color temperature and IP rating for each LED module. Verifying the material list - semiconductor LED die, aluminum heat sink, polycarbonate housing and copper contacts - helps confirm thermal performance and durability expectations for automotive applications.

Typical minimum order quantities for custom‑spec automotive LEDs range from 500 to 1 000 units per model, with lead times of 30‑45 days after final design approval. Buyers are advised to obtain a pre‑production sample for functional testing, confirm the packaging dimensions (e.g., 20 ft container capacity of approximately 12 000 units per model) and ensure that the supplier can provide the required compliance certificates before confirming the order.

What product categories does Jiangsu Jiayu New Power Technology Co., Ltd. list?

The supplier lists five LED‑based automotive lighting items under the automobile bulbs, lights & lamps category, including RS25‑39LED, RCANBUSBA9S‑2SMD, a 150 × 30 × 35 mm daytime light, RT10‑1SMD and RFESTOON‑6SMD.

Which HS codes are associated with the listed products?

The catalogue assigns HS 8539.29 to RS25‑39LED, HS 9405.40 to RCANBUSBA9S‑2SMD, HS 8512.20 to the daytime light, and HS 8539.50 to both RT10‑1SMD and RFESTOON‑6SMD.

What materials are used in these LED modules?

Materials disclosed include semiconductor LED dies (gallium‑based), aluminum heat sinks, polycarbonate or ABS plastic housings, copper lead frames or base contacts, and printed circuit board substrates.

Which certifications should a buyer request for automotive LED modules?

Buyers should ask for RoHS compliance reports, CE or E‑mark certificates, IEC 60598‑2‑37 test results and, where required, an ECE type‑approval document for vehicle lighting.

What are typical minimum order quantities and lead times?

Typical MOQs for custom automotive LEDs are 500‑1 000 units per model, with production lead times of roughly 30‑45 days after design confirmation.

How are the products usually packaged for export?

Export packaging commonly consists of anti‑static bags for each module, placed inside double‑wall cardboard cartons, with pallets prepared for 20‑ft container loading.

What documentation is needed for customs clearance?

Customs generally require a commercial invoice referencing the correct HS code, a Certificate of Origin, RoHS declaration and any applicable automotive safety certificates.