About Hebei Angyuan Rubber Trading Co., Ltd. - Rubber Hose Supplier in China

China, Hebei Angyuan Rubber Trading Co., Ltd. lists five active products in its catalogue. The company’s catalogue comprises high‑pressure steel‑wire‑braided rubber hose (HS 4009.21, synthetic rubber with steel wire braid), air‑pressure rubber hose (HS 4009.11, reinforced EPDM with textile/cord braid), water rubber hose (no HS code provided), extrusion‑pump special rubber hose (HS 4009.29, NBR/EPDM/fluorine rubber composite) and sandblast rubber hose (HS 4009.21, natural rubber tube with textile/steel reinforcement). The products fall under the broader categories of flanges and agriculture, indicating typical use in industrial piping and irrigation systems. The supplier is classified in the harbour trust tier, which relates to its verification level on trade platforms.

The five listed hoses cover a range of pressure classes and reinforcement methods. High‑pressure steel‑wire‑braided hoses are designed for pressures up to 35 MPa, while EPDM‑based air‑pressure hoses typically handle 0.5 - 2 MPa. Water hoses are used for low‑pressure conveyance, extrusion‑pump hoses serve chemical‑resistant applications, and sandblast hoses provide abrasion‑resistant delivery of abrasive media. Each product is identified by its HS‑code family 4009, which groups rubber hoses reinforced with textile or metal. The catalogue does not specify dimensions, but standard industry sizes from 6 mm to 200 mm inner diameter are common for these types.

Product Range and Specialties of Hebei Angyuan Rubber Trading Co., Ltd.

Hebei Angyuan’s catalogue includes five rubber‑hose types: high‑pressure steel‑wire‑braided hose (synthetic rubber with steel braid, HS 4009.21), air‑pressure hose (reinforced EPDM, HS 4009.11), water hose (unspecified HS), extrusion‑pump special hose (NBR/EPDM/fluorine composite, HS 4009.29) and sandblast hose (natural rubber with textile/steel reinforcement, HS 4009.21). In the global rubber‑hose market, these products correspond to ISO 4427‑type A (oil‑resistant), type B (water‑resistant), and type C (abrasive‑resistant) classifications. Typical pressure ratings range from 0.5 MPa for water hoses to 35 MPa for steel‑wire‑braided hoses, with reinforcement layers measured in 1‑3 mm steel wire or 2‑4 mm textile cords. Common material grades include EPDM (good ozone resistance), NBR (oil resistance), and FKM (fluorine rubber for high‑temperature chemicals). Standard dimensions are offered in inner diameters of 6 mm, 12 mm, 25 mm, 50 mm, 100 mm and lengths of 1 m to 100 m, packed in 20‑ft containers or wooden crates. Buyers typically request compliance with ISO 4427, DIN 30670, and CE marking for hose performance. For agricultural irrigation, hoses must meet ISO 9001 quality management and REACH‑registered material safety data sheets.

Trade and Export Information - Hebei Angyuan Rubber Trading Co., Ltd.

China is one of the world’s largest exporters of rubber hoses, and the HS‑code 4009 series is routinely cleared through Chinese customs under the export tariff schedule for rubber products. Major import regions for Chinese rubber hoses include Southeast Asia, the European Union, the Middle East and North America, where they serve automotive, construction, agricultural and petrochemical sectors. Importers generally require certificates of conformity to ISO 4427 or ISO 9001, material safety data sheets (MSDS), and test reports for burst pressure and dimensional tolerance. Typical packaging involves coils or straight lengths placed in wooden crates or bulk‑bag containers, loaded in 20‑ft or 40‑ft containers, with FOB or CIF terms commonly used. Chinese exporters often hold ISO 9001 and ISO 14001 certifications, but buyers should verify the specific certificates held by the supplier.

Sourcing from Hebei Angyuan Rubber Trading Co., Ltd. - Buyer Guidance

When sourcing hoses from Hebei Angyuan, buyers should request product data sheets that list inner diameter, wall thickness, pressure rating, reinforcement type and material grade. Sample requests for at least 5 m of hose allow verification of burst pressure (tested to 1.5× rated pressure) and flexibility. Buyers should ask for ISO 4427 test reports, MSDS, and evidence of any CE or REACH compliance. Minimum order quantities for custom‑cut lengths are usually 500 m or 10 units, with lead times of 30‑45 days after order confirmation. Verify that the HS‑code on the commercial invoice matches the product (e.g., 4009.21 for steel‑wire‑braided hoses) to avoid customs delays.

What types of rubber hoses does the supplier offer?

Hebei Angyuan lists five hose types - high‑pressure steel‑wire‑braided hose (synthetic rubber with steel braid, HS 4009.21), air‑pressure EPDM‑reinforced hose (HS 4009.11), water hose (no HS code disclosed), extrusion‑pump special hose made from NBR/EPDM/fluorine composite (HS 4009.29), and sandblast hose of natural rubber with textile/steel reinforcement (HS 4009.21). These products fall under the rubber‑hose HS 4009 family and are targeted at industrial, agricultural and construction applications.

Which industry standards are typically applied to these hoses?

Industry standards such as ISO 4427 (rubber hoses for water, oil and chemicals), DIN 30670 and CE marking are commonly required. Buyers should request the supplier’s test reports confirming compliance with the relevant standard.

What pressure ratings can be expected for the different hose types?

High‑pressure steel‑wire‑braided hoses are rated up to 35 MPa, EPDM air‑pressure hoses usually 0.5‑2 MPa, water hoses up to 1 MPa, extrusion‑pump hoses up to 10 MPa, and sandblast hoses up to 5 MPa, depending on reinforcement and material grade. The exact rating is listed on the product data sheet for each hose.

How are the hoses typically packed for export?

Hoses are coiled or folded and placed in wooden crates or bulk‑bag packs, then loaded into 20‑ft or 40‑ft containers. Each crate is sealed, labeled with the correct HS code and prepared for FOB or CIF shipment.

What documents should a buyer request before placing an order?

Buyers should obtain a product data sheet, ISO 4427 test report, material safety data sheet (MSDS), certificate of conformity (e.g., CE or REACH) and a copy of any quality‑management certification such as ISO 9001. These documents verify material composition, performance and regulatory compliance.

What are the typical minimum order quantities and lead times?

For standard lengths, the minimum order quantity is often 500 m or 10 individual hoses. Production lead time is typically 30‑45 days after receipt of a confirmed purchase order.

Which markets commonly import these Chinese rubber hoses?

Major import markets include Southeast Asian countries (Vietnam, Thailand, Malaysia), European Union members (Germany, Italy, Spain), the Middle East (UAE, Saudi Arabia) and North America. In these regions the hoses are used for agricultural irrigation, automotive fluid transfer, construction equipment and petrochemical processes.