About Handan Yuanbo Metal Products Co., Ltd. - Fasteners Supplier in China

Handan Yuanbo Metal Products Co., Ltd. is based in Handan, China and lists six active product lines in its catalogue. The company focuses on metal fasteners and related construction hardware, covering hexagonal bolts, heavy hexagonal bolts, stud bolts, thread rods, anchor bolts and a general fasteners category. These items fall under the standard fastener HS chapter 7318, which is used globally for bolts, screws and similar hardware. All six products are manufactured from carbon‑steel alloys commonly supplied in metric dimensions. The catalogue reflects a concentration on mechanical joining components for industrial and agricultural applications.

The product set aligns with typical bolt grades such as 8.8, 10.9 and 12.9, which define tensile strength in MPa and are referenced in ISO 898‑1 and DIN 933/934 standards. Heavy‑hex bolts are often supplied in lengths from 20 mm to 200 mm and diameters from M6 to M36, while stud bolts and thread rods are offered in continuous lengths that can be cut to order. Anchor bolts frequently meet ASTM A307 or A325 specifications for concrete anchoring. Fasteners in the broader category may include plain carbon steel, galvanized or stainless steel finishes, each requiring distinct corrosion‑resistance testing. Typical packaging includes steel pallets or wooden crates, with each pallet holding up to 1 ton of product for 20‑ft container loading.

Product Range and Specialties of Handan Yuanbo Metal Products Co., Ltd.

The catalogue’s six items cover the core fastener types used in structural steelwork, machinery assembly and agricultural equipment. Hexagonal bolts and heavy‑hex bolts are standard through‑hole fasteners that conform to metric thread profiles (M‑series) and are supplied in grade 8.8 or higher. Stud bolts and thread rods provide continuous threading for tensioning applications and are often cut to custom lengths on request. Anchor bolts are designed for embedding in concrete foundations and typically include a square or round head with a threaded shank. The generic “Fasteners” entry can encompass washers, nuts and other ancillary components that complement the primary bolt range.

In the fastener market, buyers usually specify material grade, tensile strength, surface treatment (zinc plating, hot‑dip galvanizing, or stainless finish) and dimensional tolerances of ±0.02 mm. For construction‑grade bolts, compliance with ISO 898‑1, ASTM A325/A490, or EN 14399 is common, while agricultural machinery often requires corrosion‑resistant stainless steel (AISI 304/316) to withstand exposure. Standard packaging sizes are 25 kg bags for smaller bolts and bulk pallets for larger studs, facilitating 20‑ft or 40‑ft container loading with typical weights of 18 - 22 tons per container.

Trade and Export Information - Handan Yuanbo Metal Products Co., Ltd.

Chinese manufacturers of metric fasteners such as bolts and studs are major suppliers to Europe, North America, the Middle East and Southeast Asia. The HS‑8 code 7318.15 covers hexagonal bolts, while 7318.19 covers other fasteners, and these codes are routinely inspected by customs authorities for compliance with material certification. Export shipments are usually packed on Euro pallets or standard 1 ton wooden pallets, loaded into 20‑ft containers (≈18 tons) or 40‑ft containers (≈22 tons). Buyers often require ISO 9001 quality‑management certification, CE marking for the European market, and mill test reports that verify grade and mechanical properties. Incoterms such as FOB Handan or CIF Shanghai are typical for bulk fastener orders, with freight rates influenced by container weight and destination port.

Sourcing from Handan Yuanbo Metal Products Co., Ltd. - Buyer Guidance

When sourcing fasteners from Handan Yuanbo Metal Products, buyers should request product data sheets that list grade (e.g., 8.8, 10.9), material composition (carbon steel, stainless steel) and mechanical test results per ISO 898‑1. A mill test report (MTR) or certificate of compliance should be provided before shipment to confirm tensile strength and chemical analysis. Samples of the hexagonal and anchor bolts are advisable to verify thread fit, head dimensions and surface coating quality. Verify that the supplier can meet packaging requirements such as 25 kg bags or palletized loads, and confirm lead times for custom lengths, which typically range from 15 to 30 days after order confirmation. Finally, ensure that any required certifications (ISO 9001, CE, or relevant ASTM/EN standards) are either held by the supplier or can be furnished as third‑party test reports.

What types of bolts are listed in the catalogue?

The catalogue includes hexagonal bolts, heavy‑hexagonal bolts, stud bolts, thread rods, anchor bolts and a general fasteners category. All these products fall under the metric HS‑8.15‑8.19 fastener classifications used worldwide.

Which material grades are commonly used for these fasteners?

Typical grades are ISO 898‑1 class 8.8, 10.9 and 12.9 for carbon‑steel bolts, providing tensile strengths of 800, 1000 and 1200 MPa respectively. Stainless‑steel options such as AISI 304 or 316 are also offered for corrosion‑resistant applications.

What documentation should a buyer request before placing an order?

Buyers should ask for a mill test report or certificate of compliance that details chemical composition and tensile strength. In addition, product data sheets and any applicable ISO 9001 or CE certificates should be obtained to verify quality management and market conformity.

Are custom lengths or thread specifications available?

Yes, stud bolts and thread rods can be cut to custom lengths according to the buyer’s drawing. All threads follow the standard M‑series metric profiles defined in ISO 261, allowing precise matching to equipment requirements.

What are the typical packaging and container loads for these products?

Small bolts are often packed in 25 kg bags, while larger studs and anchor bolts are palletized at 1 ton per pallet. A 20‑ft container can accommodate roughly 18 tons of fasteners and a 40‑ft container about 22 tons, depending on packaging density.

Which markets commonly import Chinese metric fasteners?

Major import regions include the European Union, the United States, the Middle East and Southeast Asian countries such as Vietnam and Thailand. These markets regularly source metric bolts for construction, machinery and agricultural equipment.

What Incoterms are usually used for shipments from Handan?

Exporters commonly quote FOB Handan, allowing the buyer to arrange inland transport from the departure port. For door‑to‑door delivery, CIF Shanghai is also frequently used, covering freight and insurance to the destination port.