About GOC Petrochemicals Private Limited - Petroleum By Products Supplier in India

India is the base of GOC Petrochemicals Private Limited, which lists six active products across petroleum by‑products and lubricants. The catalogue includes Gold White Oil Industrial Grade, Gold Light Liquid Paraffin (LLP & LLP‑IP), White Oil Cosmetic Grade, Rotospin 15 Lubricants, Gold Super 4t Plus 20W‑40 API SN, and Gold Mp 3 Grease. These items fall under the HS‑code family 2710 for refined petroleum oils and related lubricating products. The supplier’s portfolio therefore covers both liquid hydrocarbons used as base oils and finished lubricating formulations. The product list reflects typical industrial and cosmetic applications for white oils and standard engine oils meeting API SN specifications.

The six products are grouped into two primary categories: petroleum by‑products such as white oil and liquid paraffin, and lubricants including engine oil and grease. White Oil Industrial Grade is positioned for metalworking, transformer, and rubber processing, while the Cosmetic Grade variant targets personal‑care formulations that require low odor and high purity. The Light Liquid Paraffin series is supplied in both standard (LLP) and improved‑purity (LLP‑IP) grades, commonly measured by viscosity at 40 °C. Rotospin 15 is a mineral‑based lubricant formulated for gear and hydraulic systems. Gold Super 4t Plus 20W‑40 meets API SN service classification for gasoline‑engine oils, and Gold Mp 3 Grease conforms to NLGI grade 2 specifications for general‑purpose greasing.

Product Range and Specialties of GOC Petrochemicals Private Limited

The catalogue’s six items span typical grades found in the petroleum by‑product and lubricant markets. Industrial white oil usually exhibits a viscosity of 10‑100 cSt at 40 °C, a flash point above 250 °C, and purity levels exceeding 99.5 %. Light liquid paraffin grades are often specified by a viscosity range of 100‑200 cSt and an acid number below 0.5 mg KOH/g. Engine oil classified as API SN and SAE 20W‑40 typically shows a viscosity index of 100‑110 and a pour point around - 30 °C. Grease designated as NLGI 2 (Mp 3) is expected to have a dropping point above 200 °C and a consistency measured in mm. These specifications align with buyer expectations for industrial, automotive and cosmetic end‑uses.

Trade and Export Information - GOC Petrochemicals Private Limited

India ranks among the major exporters of refined petroleum oils and lubricants, with most shipments classified under HS chapter 27, specifically HS 2710 for refined petroleum oils, lubricating oils and greases. Typical destination regions include the Middle East, Africa, Southeast Asia and parts of Europe, where manufacturers of metalworking fluids, automotive parts and personal‑care products source such grades. Buyers usually require certifications such as an API license for engine oils, ISO 9001 quality‑management system documentation, and compliance with REACH or local hazardous‑material regulations. Standard export packaging comprises 200 L IBCs, 208 L steel drums and bulk tanker loads of up to 20 metric tons; a 20‑ft container can accommodate roughly 22 metric tons of liquid product. Export terms are often FOB from major Indian ports like Mumbai, with CIF options available for distant markets.

Sourcing from GOC Petrochemicals Private Limited - Buyer Guidance

When sourcing from this supplier, request a current material safety data sheet, a certificate of analysis and test reports covering viscosity, flash point, pour point and acid number for each liquid product. Verify the presence of an API license for the 20W‑40 engine oil and ask for ISO 9001 or equivalent quality‑system documentation to confirm compliance with industry standards. Confirm packaging details (drum or IBC size) and ensure the agreed incoterm matches the buyer’s logistics plan; typical minimum order quantities start at 1 metric ton per SKU. Lead times of 30‑45 days are common after order confirmation, allowing time for production, testing and export documentation.

What product categories does GOC Petrochemicals offer?

The supplier lists six items split between petroleum by‑products (industrial white oil, light liquid paraffin, cosmetic white oil) and lubricants (Rotospin 15, 20W‑40 engine oil, Mp 3 grease).

Which HS codes apply to these products?

All listed items are classified under HS chapter 27, specifically HS 2710 for refined petroleum oils and related lubricants, including grease.

What specifications should a buyer verify for the White Oil Industrial Grade?

Buyers should check viscosity (typically 10‑100 cSt at 40 °C), flash point (>250 °C), purity (>99.5 %), acid number (<0.1 mg KOH/g) and request a material safety data sheet and certificate of analysis.

What certifications are commonly required for the 20W‑40 engine oil?

Importers usually request an API license confirming API SN classification, a COA showing SAE 20W‑40 viscosity grades, and ISO 9001 quality‑management documentation.

What are typical packaging and shipment sizes for these oils?

Standard packaging includes 200 L IBCs, 208 L steel drums and bulk tanker loads up to 20 metric tons; a 20‑ft container can hold approximately 22 metric tons of liquid product.

What is a typical minimum order quantity and lead time?

Suppliers often set a MOQ of 1 metric ton per product, with production and documentation lead times ranging from 30 to 45 days after order confirmation.

How can a buyer obtain a sample before placing a full order?

A 5‑L or 10‑L sample can be requested together with the product’s SDS and test report; the supplier typically ships samples under FOB terms.

What import documentation is normally needed for these petroleum products?

Importers should secure a commercial invoice, packing list, certificate of origin, MSDS, and any required customs clearance certificates, while ensuring compliance with REACH or local hazardous‑material regulations.