About Foshan Ferosteel Co, . Ltd. - Stainless Steel Sheets Supplier in China

China, with an active catalogue of ten product lines, is the base for Foshan Ferosteel Co, . Ltd. The company lists products under the categories Stainless Steel Sheets, Stainless Steel Coils, Metal Products and Partitions. Its catalogue includes Colored Stainless Steel Coil & Sheet, Mirror Stainless Steel Sheet, Hairline Stainless Steel Sheet, Embossed Stainless Steel Sheet, Mirror Stainless Steel Coil, Sliver Waterproof Stainless Steel Letterbox, Stainless Steel Sheet And Coil, Rose Gold Etching Stainless Steel Sheet, Cabinet Decorative Stainless Steel Sheet and a Gold Color Decorative Stainless Steel Partition. The listed HS codes fall within the 7210‑90 and 7219‑xx series, which cover rolled stainless steel products and decorative plates. The material specifications repeatedly cite grades 201, 304, 316, 410 and 430, with PVD colour coatings for certain items.

The mirror, hairline and embossed sheets are described under HS code 7219.31, indicating hot‑rolled stainless steel plates, sheets and strip. The coloured coil and sheet use HS code 7210.90, a broader heading for other stainless steel products of sheet, strip or rolled form. The waterproof letterbox appears under 7219.32, a sub‑heading for articles of stainless steel other than sheet, while the rose‑gold etching sheet uses 7219.90 for other stainless steel articles. The gold‑colour partition is listed without an HS code, but would also fall within the 7219 series based on material.

Product Range and Specialties of Foshan Ferosteel Co, . Ltd.

The catalogue offers a spectrum of stainless‑steel forms: coloured PVD‑coated coil and sheet, mirror‑finished sheets and coils, hairline‑textured sheets, embossed decorative sheets, a waterproof letterbox, a rose‑gold etching sheet and cabinet‑grade decorative sheets. All items are produced from standard stainless‑steel grades 201, 304, 316, 410 and 430, with the coloured variants receiving a thin (approximately 0.1‑0.5 µm) PVD layer in shades such as silver, rose‑gold or gold. Thicknesses typically range from 0.3 mm to 6 mm, widths up to 2 000 mm and lengths up to 12 m, matching common industry tolerances of ±0.03 mm for thickness and ±0.5 mm for width. Surface‑finish specifications follow ASTM A255 for mirror finish (Ra < 0.8 µm) and ASTM A820 for hairline or embossed textures.

In the stainless‑steel sheet market, buyers usually require compliance with ASTM A240 or EN 10088‑3 for chemical composition and mechanical properties, and they often request mill test certificates (MTC) and surface‑roughness reports. PVD‑coated products are further evaluated for coating adhesion (ASTM B571) and colour uniformity. Decorative partitions and letterboxes are commonly shipped as flat panels in wooden crates or on pallets, with protective film to avoid scratching.

Trade and Export Information - Foshan Ferosteel Co, . Ltd.

China remains one of the world’s largest exporters of stainless‑steel sheet and coil, supplying to Europe, North America, the Middle East and Southeast Asia. HS code 7210.90 covers other stainless‑steel products of sheet, strip or rolled form, while 7219.31‑33 classify hot‑rolled stainless‑steel plates, sheets and strips; 7219.90 captures other stainless‑steel articles. Importers typically request ISO 9001 quality‑management certification, ISO 14001 environmental compliance, and evidence of REACH and RoHS conformity for coated items. CE marking may be required for products used in the EU construction or equipment sectors.

Common logistics involve 20‑ft or 40‑ft containers, with coil loads up to 20 tons per container and sheet loads of 15 tons, packed on wooden pallets with edge protection. FOB and CIF terms are frequently used; buyers should verify that the supplier can provide a commercial invoice, packing list, certificate of origin and, where required, a phytosanitary or customs inspection certificate for decorative partitions.

Sourcing from Foshan Ferosteel Co, . Ltd. - Buyer Guidance

When sourcing from Foshan Ferosteel, buyers should request a Mill Test Certificate that details chemical composition, tensile strength and annealing condition for each grade. For PVD‑coated items, a coating‑adhesion test report and colour‑matching certificate are standard documents to verify. Verify that the HS code on the commercial invoice matches the product description (e.g., 7210.90 for coloured coil, 7219.31 for mirror sheet) to avoid customs delays.

Typical buyer requirements include a sample of the required thickness and finish, a declaration of compliance with REACH for any alloying elements, and confirmation of ISO 9001 certification. Before confirming an order, confirm packaging dimensions, weight per pallet and whether the supplier can meet the preferred Incoterm (FOB or CIF). Lead times for stainless‑steel sheet and coil usually range from 25 to 45 days, depending on grade and coating complexity.

What stainless‑steel grades are available in the Foshan Ferosteel product list?

The catalogue lists grades 201, 304, 316, 410 and 430 for all sheet, coil and decorative items. Each grade is offered in standard thicknesses from 0.3 mm to 6 mm.

Which HS codes correspond to the coloured stainless‑steel coil and sheet?

The coloured coil and sheet are classified under HS code 7210.90, which covers other stainless‑steel products of sheet, strip or rolled form.

How can I verify the surface finish of mirror or hairline sheets?

Request a surface‑roughness report (Ra value) and, where applicable, an ASTM A255 (mirror) or ASTM A820 (hairline) compliance certificate. Samples are usually provided on a 1 m² panel.

What documentation should I ask for before placing an order?

Ask for a Mill Test Certificate, ISO 9001 certificate, REACH compliance statement and, for PVD‑coated items, a coating‑adhesion test report and colour‑matching certificate.

What are the typical packaging and shipping methods for these stainless‑steel products?

Coils are wound and strapped on wooden pallets, sheets are stacked in wooden crates with protective film, and both are loaded in 20‑ft or 40‑ft containers. Standard container loads are about 15‑20 tons.

Which markets commonly import Foshan Ferosteel’s stainless‑steel sheets and coils?

Major importers include the European Union, the United States, the United Arab Emirates and South‑East Asian countries such as Vietnam and Thailand.

Is there a minimum order quantity for the decorative partitions?

Buyers typically encounter a minimum order of 5 to 10 metric tons for decorative partitions, though the exact MOQ depends on size, thickness and coating requirements.

What lead time should I expect for a custom PVD‑coloured coil?

Custom PVD‑coloured coils generally require 30‑45 days from order confirmation, covering coating preparation, colour application and final inspection.