About China Custom Flag Makers - Advertising Equipments & Materials Supplier in China

China Custom Flag Makers operates from China and currently lists five active products in the advertising equipment sector. The catalogue includes Advertising Feather Flags, Custom Teardrop Flags, Teardrop Flag Printing, Feather Flag Banners, and Teardrop Banner Flags. These items fall under HS Chapter 63 with codes 6307.90 for most flag fabrics and HS 9405.59‑60 for pole‑mounted banners. Each product is described with its primary material, such as knitted polyester 110 gsm with fiberglass pole for feather flags or 110‑180 gsm polyester fabric for teardrop flags. The supplier’s focus is on polyester‑based flag fabrics combined with fiberglass or aluminum supporting structures.

The listed materials specify polyester fabrics ranging from 110 gsm to 180 gsm, often treated for outdoor durability, and poles made of fiberglass or aluminum. Dye‑sublimation printing is noted for the Teardrop Flag Printing and Teardrop Banner Flags, indicating a full‑color digital print process on polyester. The product set therefore covers both printed and plain fabric options, compatible with standard flag pole diameters used in outdoor advertising. All five entries are categorized under the single top category “Advertising Equipments & Materials.”

Product Range and Specialties of China Custom Flag Makers

The supplier’s catalogue comprises five items: Advertising Feather Flags (HS 6307.90, knitted polyester 110 gsm with fiberglass pole), Custom Teardrop Flags (HS 9405.60, 110‑180 gsm polyester fabric), Teardrop Flag Printing (HS 6307.90, polyester flag fabric with dye‑sublimation ink), Feather Flag Banners (HS 9405.59, polyester fabric with fiberglass or aluminum pole) and Teardrop Banner Flags (HS 6307.90, polyester fabric 110 gsm with digital dye‑sublimation print). These products represent standard advertising flag formats used for outdoor promotion and event signage.

In the advertising‑flag industry, polyester fabrics are typically supplied in 110‑180 gsm weights, UV‑stabilised, and water‑repellent to withstand weather exposure. Poles of fiberglass or aluminum are rated for wind loads between 0.5‑2 kN depending on diameter. Dye‑sublimation printing provides fade‑resistant colors with a minimum resolution of 144 dpi, and buyers often request reinforced stitching at seams. Common size ranges include feather flags from 0.6 m to 4 m in height and teardrop flags from 0.5 m to 2 m width.

Trade and Export Information - China Custom Flag Makers

China is a leading exporter of textile‑based advertising products, and the flag items listed under HS 6307.90 and 9405.x are regularly shipped to North America, the European Union, the Middle East and Southeast Asia. Import duties for these HS codes typically range from 5 % to 12 % depending on the destination, and buyers frequently require ISO 9001 quality management certification, CE marking for pole safety, and Oeko‑Tex Standard 100 for textile safety when importing into regulated markets.

Typical logistics involve rolling the flags in polyethylene tubes, loading them into 20‑ft containers (approximately 1,200 kg) or 40‑ft containers (approximately 2,400 kg). Common Incoterms used by Chinese manufacturers include FOB Shanghai and CIF destination port. For EU shipments, compliance with REACH restrictions on textile chemicals and provision of a material safety data sheet for fiberglass components are standard requirements.

Sourcing from China Custom Flag Makers - Buyer Guidance

Prospective buyers should request a material data sheet that confirms GSM, UV‑stabiliser type, tear strength (N) and pole load rating. Samples of dye‑sublimation prints are advisable to verify colour fidelity, and test reports for flame resistance (e.g., NFPA 701) may be needed for markets with strict safety standards. Confirm that the packaging will be rolled in protective tubes and that the commercial invoice lists the correct HS code to avoid customs delays.

Typical minimum order quantities are around 100 units per design, with a production lead time of 15‑30 days after artwork approval. Buyers should calculate container loading - a 20‑ft container can accommodate roughly 800 rolled flags - and ensure any required import permits for fiberglass poles are obtained before shipment.

What types of flag products does China Custom Flag Makers offer?

The supplier lists five products - Advertising Feather Flags (HS 6307.90), Custom Teardrop Flags (HS 9405.60), Teardrop Flag Printing (HS 6307.90), Feather Flag Banners (HS 9405.59) and Teardrop Banner Flags (HS 6307.90) - all made from polyester fabrics with fiberglass or aluminum poles.

Which materials are used for the flags and poles?

Flag fabrics are polyester ranging from 110 gsm to 180 gsm, either knitted or woven, and printed with dye‑sublimation ink where indicated. Poles are supplied in lightweight fiberglass or aluminum, chosen for outdoor durability.

What HS codes apply to these items?

Flag fabrics fall under HS 6307.90 (other made‑up textile articles), while pole‑mounted banner items are classified under HS 9405.59 and HS 9405.60 (other furniture).

Are there common certifications buyers should request?

Buyers typically ask for ISO 9001 for manufacturing quality, CE marking for pole safety, and optionally Oeko‑Tex Standard 100 for textile safety; the catalogue does not list any specific certifications held by the supplier.

What is the usual minimum order quantity and lead time?

Standard minimum order quantities are about 100 units per design, with a production lead time of 15‑30 days after final artwork approval.

How are the flags packaged for shipment?

Flags are rolled and placed in polyethylene tubes, then packed in wooden crates or cardboard boxes suitable for loading into 20‑ft or 40‑ft containers.

Which markets commonly import these advertising flags?

Major import markets include the United States, European Union members, the United Arab Emirates and several Southeast Asian countries, where outdoor advertising and event promotion drive demand.

What documentation is needed for customs clearance?

Typical documents are a commercial invoice, packing list, certificate of origin and any applicable test reports such as UV‑resistance or flame‑retardancy that match the HS code description.