About Bibi Empire Sdn. Bhd - Aluminum Ingots Supplier in Malaysia

Based in Malaysia, Bibi Empire Sdn. Bhd lists sixteen active products across metal, agricultural, energy and chemical categories. The catalogue includes aluminum ingots (A7 grade, 99.7% purity, HS 7601.20), lump iron ore (hematite, 62‑63% Fe, HS 2601.11), non‑LME copper cathodes (99.99% Cu, HS 7403.11), diesel EN590 with 10 ppm sulfur, ICUMSA‑45 sugar, several fertilizer grades (NPK 15, DAP, Urea N 46%), corn, wheat, soybean, sunflower oil, jet fuel A1, Bonny Light crude oil, wood pellets EN A1 and poultry by‑products such as chicken feet.

The product list also mentions commodity grades without explicit HS codes, such as dried yellow corn (GMO and non‑GMO), wheat, soybean, sunflower oil, jet fuel, Bonny Light crude oil, wood pellets and chicken paws. Each entry reflects a specific material or grade that aligns with standard international HS chapters for metals (Chapter 76‑74), agricultural grains (Chapter 10‑12), fuels (Chapter 27) and fertilizers (Chapter 31).

Product Range and Specialties of Bibi Empire Sdn. Bhd

The catalogue covers primary aluminum ingots (A7, 99.7% Al) which are commonly supplied in 5‑ton or 12‑ton ingot blocks and meet the standard specifications of the Aluminium Association. Dried yellow corn is offered in both GMO and non‑GMO variants, typically with a moisture content of 13‑14% and compliant with HS 1005.10. Diesel EN590 is specified at 10 ppm sulfur, aligning with the EU diesel standard and usually shipped in ISO tank containers. Lump iron ore (hematite) is described with 62‑63% Fe, a typical grade for blast‑furnace feed, classified under HS 2601.11. ICUMSA‑45 sugar falls within the 600‑1200 ppm ash range and is graded under HS 1701.99. Fertilizer products include NPK 15 (balanced N‑P‑K ratio), DAP (diammonium phosphate, ~46% P₂O₅) and Urea with 46% nitrogen, all standard grades in HS 3105‑3102. Non‑LME copper cathodes (99.99% Cu) are supplied in 1‑ton slabs under HS 7403.11. Additional commodities such as sunflower oil, jet fuel A1, soybean, wheat, Bonny Light crude oil, wood pellets EN A1 and chicken feet are typical bulk agricultural or energy products, each matching their conventional HS chapters.

Industry norms for these categories define quality parameters such as aluminum purity (≥99.7%), copper assay (≥99.95%), diesel sulfur (≤10 ppm), sugar ICUMSA value (≤45), fertilizer nutrient analysis (±0.5% for N, P₂O₅, K₂O) and wood pellet calorific value (≥4 500 kcal/kg). Buyers frequently request ISO 9001 or ISO 14001 compliance for metals, phytosanitary certificates for grains, and SGS inspection reports for fuels and fertilizers.

Trade and Export Information - Bibi Empire Sdn. Bhd

Malaysia exports aluminum alloys, copper cathodes, iron ore and a broad range of agricultural commodities, primarily to Asian markets such as China, Japan, South Korea and to the EU and United States. HS code families 7601, 7403 and 2601 are routinely inspected under the Malaysian Ministry of International Trade and Industry (MITI) and may require a Certificate of Origin for preferential tariff treatment. Diesel, jet fuel and crude oil are shipped under Incoterms FOB or CIF, with bulk cargo handled in ISO tankers or oil tankers, while solid commodities like aluminum ingots, copper cathodes and fertilizers are typically loaded in 20‑ft or 40‑ft containers or bulk carriers. Standard certifications requested by importers include ISO 9001 quality management, ISO 14001 environmental management, and, for food‑grade products, ISO 22000 or HACCP documentation.

Buyers of Malaysian fertilizers and agricultural products often require a Phytosanitary Certificate, a Certificate of Analysis (CoA) and, where applicable, a GMO declaration. Energy products such as diesel EN590 and jet fuel must meet the specifications of ISO 8217 and may be subject to bunker fuel sulphur monitoring under IMO 2020. Export documentation generally includes a commercial invoice, packing list, bill of lading and, for metals, a mill test report. The typical export logistics involve trans‑shipment through Port Klang for containers and the Petronas Deepwater Terminal for bulk oil shipments.

Sourcing from Bibi Empire Sdn. Bhd - Buyer Guidance

When sourcing aluminum ingots from Bibi Empire, request a recent mill test report showing chemical composition, tensile strength and dimensional tolerances, and verify that the HS code 7601.20 matches the supplied grade. For copper cathodes, ask for an assay certificate confirming 99.99% Cu purity and any surface cleanliness tests.

For agricultural and fuel commodities, buyers should obtain a Certificate of Analysis that details moisture, protein (for corn and soybean), sulfur content (for diesel), ICUMSA value (for sugar) and nutrient percentages (for NPK, DAP, Urea). Phytosanitary certificates are mandatory for grain shipments, while fuel purchases typically require a bunker fuel inspection report and compliance with ISO 8217. Verify packaging specifications - bulk bags for fertilizers, ISO tanks for diesel and jet fuel, and 20‑ft/40‑ft containers for grains - and confirm the agreed Incoterm (FOB or CIF) before finalizing the contract.

What metal grades does Bibi Empire offer and how are they classified?

The supplier lists A7 aluminum ingots (99.7% purity) under HS 7601.20 and non‑LME copper cathodes (99.99% Cu) under HS 7403.11. Both grades follow standard industry specifications for purity and dimensional tolerances.

Are GMO and non‑GMO corn available from this supplier?

Yes, the catalogue includes dried yellow corn in both GMO and non‑GMO variants. Typical specifications include 13‑14% moisture and compliance with HS 1005.10.

What fuel specifications are provided for diesel and jet fuel?

Diesel is specified as EN590 with a maximum sulfur content of 10 ppm, while jet fuel is listed as A1 grade. Both products are usually shipped in ISO tankers and meet ISO 8217 standards.

Which certifications should a buyer request for the fertilizer products?

Buyers should request a Certificate of Analysis for NPK 15, DAP and Urea, showing nutrient content (e.g., NPK 15‑15‑15, DAP ~46% P₂O₅, Urea 46% N) and verify ISO 9001 or ISO 14001 compliance if available.

What documentation is needed for grain imports such as wheat, soybean or corn?

Importers typically require a commercial invoice, packing list, bill of lading, a phytosanitary certificate and a Certificate of Analysis that confirms moisture, protein and GMO status.

How are bulk commodities like wood pellets and chicken feet packaged for export?

Wood pellets (EN A1) are usually packed in 1 ton bulk bags or bulk carrier holds, while chicken feet and paws are shipped in insulated containers or refrigerated bulk bags to maintain hygiene.

What HS codes apply to the iron ore and sugar products?

Lump iron ore (hematite, 62‑63% Fe) uses HS 2601.11, and ICUMSA‑45 sugar falls under HS 1701.99, which are the standard classifications for these commodities.

What are the typical minimum order quantities and lead times for these products?

Metal ingots and copper cathodes often have a minimum order of 1 ton, fertilizers usually start at 10 tons, diesel and jet fuel at 5 tons, and grains at 20 tons. Lead times vary from 2 weeks for bulk grains to 4‑6 weeks for metals, depending on production and shipping schedules.