About Beijing Hongyi Guangfa Trading Co., Ltd. - Stainless Steel Sheets Supplier in China

China, Beijing‑based Beijing Hongyi Guangfa Trading Co., Ltd. lists ten active products covering stainless steel sheets, elevator components, household mirrors and carbon steel strips. The catalogue specifies embossed stainless steel sheet, custom hairline black sheet, hairline nickel‑silver sheet, supper mirror sheet and elephant‑skin coloured embossed sheet, all under HS code 7219.31 or 7219.90 and made from grades such as SS304, SS316, SS430 and SS201. A carbon‑steel strip type is recorded with HS code 7209.18 and uses ASTM 1045, 1035, 1030 and 1020 grades. Additional items include elevator handrails, stainless steel mirror, elevator rope anchorage and stainless steel elevator handrails, for which HS codes are not provided in the source data.

Product Range and Specialties of Beijing Hongyi Guangfa Trading Co., Ltd.

The product list focuses on flat stainless‑steel products that are commonly supplied as coils or cut sheets. Typical industry grades for the listed items are SS304 and SS316 for corrosion‑resistant applications, while SS430 and SS201 provide lower‑cost alternatives with magnetic properties; surface finishes range from embossed patterns to hairline and mirror polish, often measured by Ra values below 0.8 µm for mirror grades. Carbon‑steel strips such as the HY012 type are usually supplied in the 0.5 mm to 6 mm thickness range and conform to ASTM A108 or EN 10025 specifications for mechanical properties. Buyers in the elevator sector often request handrails and rope anchorage components that meet EN 81‑20/81‑50 safety standards and are fabricated from the same stainless‑steel grades to ensure durability and fire resistance.

Trade and Export Information - Beijing Hongyi Guangfa Trading Co., Ltd.

Stainless‑steel sheet and strip exports from China are frequently shipped to construction, appliance, automotive and elevator manufacturers in Europe, North America and Southeast Asia. HS chapter 72 (steel products) governs the listed items, with sub‑heading 7219 covering flat stainless‑steel products and 7209 covering carbon‑steel strips. Importers typically require mill test certificates, compliance with ISO 9001 quality‑management systems and, where applicable, CE marking for EU market entry. Packaging is usually in bundled coils or flat packs, secured on 20‑ft or 40‑ft containers; FOB Shanghai or CIF destination ports are common Incoterms for these commodities. Chinese exporters of stainless steel often provide pre‑shipment inspection reports (e.g., SGS or Bureau Veritas) to satisfy buyer due‑diligence.

Sourcing from Beijing Hongyi Guangfa Trading Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request mill test certificates that detail chemical composition and mechanical properties for each stainless‑steel grade. Verify that surface‑finish tolerances (e.g., Ra < 0.8 µm for mirror finish) and thickness tolerances (typically ±0.1 mm) are documented in the product data sheet. For elevator handrail and rope‑anchorage items, ask for conformity statements to EN 81‑20/81‑50 and any relevant fire‑rating test reports before confirming order quantities.

What stainless‑steel grades are offered for the embossed and hairline sheet products?

The embossed and hairline sheet products are listed as SS304, SS316, SS430 and SS201. These grades correspond to the standard grades defined in ASTM A240 and EN 10088‑2 for corrosion resistance and formability.

Which HS codes apply to the stainless‑steel sheet items?

All stainless‑steel sheet items in the catalogue are classified under HS code 7219.31, except the elephant‑skin coloured embossed sheet which uses HS code 7219.90.

What material and HS code are used for the carbon‑steel strip?

The carbon‑steel strip (HY012 type) is specified as ASTM 1045, 1035, 1030 or 1020 and is classified under HS code 7209.18.

Are certifications such as ISO 9001 or CE required for these products?

The supplier’s catalogue does not list any certifications. Buyers should request ISO 9001 quality‑management certification and CE compliance documentation where the products will be used in the EU market.

What typical packaging and container sizes are used for shipping the steel sheets?

Stainless‑steel sheets are usually bundled in coil or flat‑pack form, secured on pallets, and loaded into 20‑ft or 40‑ft containers. Standard shipping terms are FOB Shanghai or CIF to the buyer’s destination port.

What documentation should be obtained before placing an order for elevator handrails?

For elevator handrails, request a product conformity statement to EN 81‑20/81‑50, a mill test certificate for the stainless‑steel grade, and any fire‑rating test reports required by the target market.

How can I verify the thickness and surface finish of the mirror‑grade stainless steel?

Ask the supplier for a detailed product data sheet that includes measured thickness (with tolerance) and surface‑finish roughness (Ra value). A third‑party inspection report can provide independent verification before shipment.