About Aquatec India - Brass Hardware Supplier in India

Aquatec India is based in India and lists nine active products across its catalogue. The portfolio includes brass sanitary and plumbing fittings, compression fittings, flare and barb fittings, precision components, inserts for PPR, CPVC and UPVC, and forged components, each classified under HS chapter 74 (e.g., 7412.20 for most fittings and 7412.10 for inserts) or HS 7307.99 for carbon and stainless steel castings. Materials are specified as brass alloys such as C360, CW617N, CZ132 and CW614N, with copper content ranging from 58 % to 63 % and zinc from 35 % to 41 %, while the steel castings are described as carbon or stainless steel of various grades. The catalogue also mentions generic hardware items such as nuts, check nuts and bush accessories, which fall under standard hardware HS headings.

The listed products address both sanitary plumbing and industrial pressure‑fitting applications. Brass sanitary/plumbing fittings are recorded under HS 7412.20 and are made from C360 alloy (Cu 60‑63 %, Zn 35‑37 %, Pb 2.5‑3.5 %). Compression fittings use dezincification‑resistant brass CW617N/CZ122, and flare and barb fittings use CW617N/DZR brass with lead below 0.5 %. Precision components are coded under HS 7407.21 and are produced from CuZn39Pb3 (CW614N) or free‑machining C36000. Inserts for PPR pipe fittings are under HS 7412.10 and use CZ132 alloy (Cu 58‑60 %, Zn 38‑40 %, Pb 1‑3 %). Brass forged components and fittings share the 7412.20 code and are typically CW614N or CW617N lead‑brass alloys.

Product Range and Specialties of Aquatec India

Aquatec India’s catalogue groups its brass items under HS 7412.20, covering sanitary fittings, compression, flare, barb and forged components, all manufactured from alloys such as C360, CW617N, CZ132 and CW614N. In the brass industry, C360 is a free‑machining alloy meeting ASTM B16 / B21 standards, while CW617N is a dezincification‑resistant grade often required for potable‑water systems and complies with BS 5250 Part 2. Typical specifications include pressure ratings from PN 10 to PN 25, pipe‑thread standards (BSP, NPT) and dimensional tolerances of ±0.1 mm for precision components. The precision component line (HS 7407.21) uses CuZn39Pb3 alloy, which is common for CNC‑machined parts needing high dimensional stability and is often tested to ISO 2768‑1 tolerance class. The steel casting line (HS 7307.99) includes carbon and stainless steel grades such as ASTM A36 or AISI 304, which are standard for divertor and valve applications and are usually supplied with mill test certificates.

Trade and Export Information - Aquatec India

India is a major exporter of brass fittings, with the majority of shipments destined for the Middle East, Africa and Southeast Asian construction markets. HS 7412.20 items are subject to customs inspections that verify material composition, often through a Declaration of Conformity and a third‑party assay report. Buyers typically request ISO 9001 quality‑management certification, CE marking for EU markets, and RoHS compliance for electronic‑compatible fittings. Steel castings under HS 7307.99 are frequently required to carry a Material Test Certificate (MTC) and, where stainless steel is used, a certification to ASTM A240 or EN 10204 3.1. Common packaging includes wooden crates with internal corrugated dividers, and logistics are usually quoted FOB Mumbai or CIF Dubai, reflecting the standard Indian export routes for hardware products.

Sourcing from Aquatec India - Buyer Guidance

When sourcing brass fittings from Aquatec India, request a material assay report that confirms copper, zinc and lead percentages for the specific alloy (e.g., C360, CW617N). Ask for compliance documents such as ISO 9001, CE or BIS certification, and for pressure‑test certificates that show performance at the intended PN rating. Verify that the supplier can provide mill test certificates for any steel castings and that the packaging plan includes moisture‑resistant inner liners to protect against corrosion during sea freight.

What HS codes are associated with Aquatec India's brass products?

The majority of brass sanitary, plumbing, compression, flare, barb and forged fittings are classified under HS 7412.20, while brass inserts for PPR pipe fittings use HS 7412.10. Precision components fall under HS 7407.21 and steel castings are listed under HS 7307.99.

Which brass alloy grades are listed in the catalogue?

The catalogue specifies C360 (Cu 60‑63 %, Zn 35‑37 %, Pb 2.5‑3.5 %), CW617N/CZ122 (dezincification‑resistant), CZ132 (Cu 58‑60 %, Zn 38‑40 %, Pb 1‑3 %), and CW614N (CuZn39Pb3) as the primary alloys.

What certifications should a buyer request for these fittings?

Buyers should ask for ISO 9001 quality‑management certification, CE marking if the goods are destined for the EU, and RoHS compliance for electronic‑compatible applications. For steel castings, a Material Test Certificate to ASTM A36 or AISI 304 standards is typical.

Are there standard pressure ratings for the brass fittings?

In the industry, brass plumbing fittings are commonly supplied to PN 10, PN 16 or PN 25 pressure classes, with thread standards such as BSP or NPT. Specific pressure ratings should be confirmed in the supplier’s technical data sheet.

What packaging is used for shipment?

Standard export packaging for brass hardware from India includes wooden crates with internal corrugated dividers, often wrapped in moisture‑resistant film. Larger orders may be palletised on Euro‑pallets for container loading.

Which Incoterms are typically offered?

Aquatec India generally quotes FOB terms from the major Indian ports such as Mumbai or Chennai, and can also provide CIF quotes to regional hubs like Dubai or Singapore.

How can a buyer obtain samples?

Buyers can request a pre‑shipment sample by specifying the exact alloy, product type and required dimensions; the supplier will usually provide a small quantity for testing before confirming a full order.

What documentation is needed for customs clearance?

Customs authorities typically require a commercial invoice, packing list, certificate of origin, material assay report for brass alloys, and any relevant certification (ISO 9001, CE, RoHS) that matches the HS code declaration.