Magic Pox -epoxy System For Coating And Casting

Magic Pox is a crystal clear epoxy coating and casting resin Magic Pox is a crystal clear casting and coating epoxy system that cures to a rigid, Moisture resistant, shiny high gloss of crafts and decorative applications Magic Pox finishes used for: Coating Casting Clear coating and sealing artwork Casting jewelry including earrings Photography Pendants Plaques and frames Necklace ring & Rings Paper collages Figurines Tabletops Coasters Ideal for Both Casting and Coating Perfect for starter beginner and professional artist Cures crystal clear Moisture resistant Environment friendly (odor free and no solvent) Rigid and high gloss finish Self-leveling Exceptional clarity Natural air bubble release without the need for degassing Hard wearing and highly polishable! Excellent impact strength Mix ratio by weight : 100 A : 25 B Color Water clear Solids Content 100 % Specific gravity 1.1 ± 0.02 Working time Approx. 30 min. (at 23 C) Substrate temp. Min 10 C , max 30C Initial Curing time Approx. 24 h (at 23 C) Fully cured 7 days (at 23 C) Hardness, Shore D > 82 How to use Surface preparation: The surface must be clean, dry, and free of dust. The all damaged areas, cracks and surface irregularities must be repaired and smoothened. Mixing: It is important to remember that this cast has a limited work time (Approx. 30 min. at 23 C).Therefore it is wise to check and make sure everything is in order before starting the mixing sequence. Stir the contents of part A with an electrical stirrer .Add part B to part A completely for 2 - 3 minutes with a low speed stirrer until a homogenous mix is achieved. Be careful not to introduce any air bubbles while mixing until a uniform consistency is obtained. Afterwards the mixture is left to rest for approx. 5 minutes, then pouring Magic Pox in prepared surface. Processing conditions: Temperature-The optimal processing temperature is about 20 C. Raising the temperature by 10 C halves the pot life and doubles the reactivity Air humidity The relative air humidity during processing should not exceed 65 %. Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 C) can counteract too great an exothermal reaction. Cleaning Cleaning all tools and equipments immediately after use with acetone or cellulose thinners. Health and Safety Use gloves and breathing mask when applying. Apply forced ventilation in confined spaces. Skin splashes to be removed with hand cleanser, soap and water. Eye splashes to be removed with plenty of water. If ingested seek medical advice