About Ivory UAE Recycling - Plastic and Metal Scrap Supplier in United Arab Emirates

Based in Abu Dhabi, United Arab Emirates, Ivory UAE Recycling lists seven active product entries in its catalogue. The company trades ferrous and non‑ferrous metal, plastic and paper scrap sourced from local vendors. Its plastic catalogue includes low‑density polyethylene (LDPE) film scrap, polyethylene terephthalate (PET) bottle waste, polyurethane (PU) foam, high‑density polyethylene (HDPE) milk bottles and blue drums, as well as polymethyl methacrylate (PMMA) acrylic scrap. The metal side is represented by used electric motor scrap. Each product is identified with a specific HS‑code: 3915.10 for most plastic waste, 3921.19 for PU foam, 3915.90 for PMMA, and 7404.00 for electric motor scrap.

The HS‑code families place the plastics in Chapter 39 (Plastics and articles thereof) and the motor scrap in Chapter 74 (Copper, nickel, cobalt and articles thereof). The catalogue covers both bulk forms such as rolled LDPE film and baled PET bottles, and discrete items like HDPE drums and acrylic sheets. Ivory UAE Recycling states that it supplies these materials to customers in various parts of the world, reflecting the UAE’s role as a regional hub for scrap collection and re‑export. The seven product lines together enable buyers to source a range of recyclable polymers and metal components from a single UAE‑based supplier.

Product Range and Specialties of Ivory UAE Recycling

LDPE film scrap is typically graded by melt flow index (MFI) between 0.5 and 2 g/10 min and may be supplied in bales of 500 kg or in rolls up to 1 000 m. PET bottle waste is usually sorted by colour, cleaned to less than 0.2 % foreign material, and measured for intrinsic viscosity (IV) in the range 0.65 - 0.85 dl/g. PU foam scrap can be flexible or rigid; common specifications include density 30 - 50 kg m‑3 and compression set below 15 %. HDPE milk bottles and blue drums are food‑grade polymers with moisture content below 1 % and are often shipped in 20‑ft containers holding 12 - 15 tonnes of baled material. PMMA acrylic scrap is graded by optical clarity and thickness, with typical sheet thicknesses from 0.5 to 5 mm and transmittance above 92 %. Scrap electric motors are classified as ferrous metal with copper windings; buyers usually request a steel grade (e.g., mild steel) and copper recovery rate of 20 - 30 %.

In the global recycling market, these grades correspond to the most common export specifications. For example, LDPE film of MFI 0.5 - 2 is accepted under EU waste‑plastic directives, while PET with IV 0.70 dl/g meets the requirements for re‑granulation into food‑contact bottles. PU foam with the stated density is suitable for re‑processing into carpet underlay, and HDPE drum scrap is frequently used for producing new containers after melt‑flow testing. PMMA scrap of high optical clarity is a feedstock for optical lenses or signage. Electric motor scrap is often processed in secondary metal smelters that require a documented copper recovery percentage and a CE or RoHS compliance statement.

Trade and Export Information - Ivory UAE Recycling

The United Arab Emirates serves as a major trans‑shipment hub for plastic and metal scrap, leveraging its free‑zone logistics and proximity to Asian and European markets. Plastics classified under HS 3915.10 and 3915.90 are routinely exported to the European Union, China, India and Turkey, where they enter re‑processing streams for PET bottles, LDPE films and PMMA sheets. Importers generally require compliance with REACH, the EU Waste Framework Directive, and, where applicable, ISO 14001 environmental management certification.

Motor scrap under HS 7404.00 is typically destined for secondary metal smelters in the EU and South‑East Asia, and buyers often request CE marking and a test report confirming copper content and the absence of hazardous substances such as PCBs. Standard packaging includes wooden pallets for 20‑ft containers (≈10 tonne) for plastics and steel drums for metal scrap, with FOB Abu Dhabi or CIF Dubai being the most common Incoterms. The UAE’s customs procedures allow for rapid clearance of waste shipments provided that material safety data sheets (MSDS) and waste export permits are supplied.

Sourcing from Ivory UAE Recycling - Buyer Guidance

Buyers should request a recent laboratory analysis for each plastic grade: MFI for LDPE, intrinsic viscosity for PET, density for PU foam, moisture and contamination levels for HDPE, and optical clarity for PMMA. A sample batch of 10 - 20 kg is customary before finalising volume orders, allowing verification of colour sorting, foreign‑material percentage and melt‑flow characteristics. For electric motor scrap, a test report showing steel grade, copper recovery rate and a declaration of non‑presence of hazardous components is standard.

It is advisable to confirm that the supplier can provide an MSDS, a REACH compliance statement for the plastics, and, if required by the destination country, an ISO 9001 or ISO 14001 certificate. Verify that the HS code used in the commercial invoice matches the product description to avoid customs delays. Finally, discuss packaging details - whether the LDPE rolls will be shrink‑wrapped, PET bottles baled, or HDPE drums palletised - to ensure compatibility with the buyer’s logistics chain.

What plastic scrap categories does Ivory UAE Recycling offer?

The catalogue includes low‑density polyethylene (LDPE) film scrap, polyethylene terephthalate (PET) bottle waste, polyurethane (PU) foam, high‑density polyethylene (HDPE) milk bottles and blue drums, and polymethyl methacrylate (PMMA) acrylic scrap, each listed under HS 3915.10, 3921.19 or 3915.90.

Which HS code is used for the LDPE and PET bottle scrap?

Both LDPE film scrap and PET bottle scrap are classified under HS 3915.10, the code for plastic waste in forms such as sheets, plates, rods, tubes and other shapes.

What specifications should a buyer check for PET bottle scrap?

Buyers typically verify colour sorting, foreign‑material contamination below 0.2 %, and intrinsic viscosity (IV) in the range 0.65 - 0.85 dl/g, which indicates suitability for re‑granulation.

How is scrap electric motor classified and what documentation is common?

Electric motor scrap falls under HS 7404.00 (scrap of electric motors). Buyers usually request a test report showing steel grade, copper recovery percentage (20 - 30 %) and a statement of compliance with CE or RoHS standards.

What are the typical container capacities for the plastic scrap listed?

A 20‑ft container can hold roughly 12 - 15 tonnes of baled PET or HDPE, while rolled LDPE film can fill a 40‑ft container up to 20 tonnes, depending on packaging density.

Which certifications are normally required for importing UAE plastic waste?

Importers often ask for REACH compliance, an ISO 14001 environmental management certificate, and a material safety data sheet (MSDS) for each plastic grade.

What lead time and minimum order quantities are common for these scrap products?

Suppliers in the UAE generally work with a minimum order of one 20‑ft container (≈10 tonnes) and a lead time of 2 - 4 weeks from order confirmation to shipment, subject to availability of the specific grade.