Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

The Bonka 1500mAh 80C 4S Graphene LiPo battery operates at a nominal voltage of 14.8V, composed of four 3.7V lithium polymer cells in series. It delivers a continuous discharge rate of 80C, enabling a maximum current output of 120A, and features graphene-enhanced electrodes to improve thermal conductivity and cycle stability. The battery uses a JST-XH balance connector and an XT60 discharge terminal.
Graphene technology in this battery reduces internal resistance and improves heat dissipation compared to standard LiPo cells, allowing higher discharge rates without significant voltage sag. The 80C rating is typical for high-performance RC racing batteries, suitable for 1/8 scale buggies, 5-inch FPV drones, and high-torque applications. The pouch casing remains lightweight, with an estimated weight of 135 grams, consistent with similar graphene-enhanced packs.
This battery is targeted at professional RC racers, drone operators, and industrial robotics integrators requiring burst power and rapid recharge cycles. It is sold in bulk packaging with individual anti-static shielding. Trade terms are typically FOB Shenzhen, and minimum order quantities must be confirmed directly with the supplier. Lead times are not stated and should be verified prior to order placement.
| Nominal Voltage | 14.8V |
| Capacity | 1500mAh |
| Discharge Rate | 80C continuous |
| Max Continuous Current | 120A |
| Cell Configuration | 4S (4 cells in series) |
| Connector Type | JST-XH balance, XT60 discharge |
| Weight | Approximately 135g |
| Chemistry | Lithium Polymer with graphene-enhanced electrodes |
| Typical Internal Resistance | 8-12mΩ per cell, typical for graphene-enhanced 1500mAh 4S packs |
| Typical Charging Rate | 1C recommended, up to 3C with active cooling, standard for high-C graphene LiPo |
Bonka Co., Ltd. is a supplier based in Shenzhen, Guangdong, operating from an industrial address in the Guo Run Industrial area. The listing identifies the supplier as imported and verified through harbor-level trust signals, indicating compliance with export documentation standards. There is no public information on years in business, employee count, or certifications beyond the product listing.
The company appears to focus on manufacturing and exporting RC batteries under the Bonka brand, with no mention of retail operations, in-house R&D, or third-party testing. Response rates and average reply times are not recorded, suggesting limited customer service infrastructure. Buyers should treat this as a direct manufacturer without additional service layers.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before placing an order, verify the actual graphene content and electrode construction method. Request a test report showing internal resistance per cell and voltage consistency under load. Confirm that the battery lacks a built-in protection circuit and that your system includes external safeguards. Packaging should include anti-static shielding and clear labeling of voltage, C-rating, and polarity.
Confirm the Incoterms with the supplier - FOB Shenzhen is likely, but CIF or DAP may be available upon request. Lead times are not listed and can vary from 10 to 28 days depending on production volume. Payment terms are typically T/T in advance or LC for bulk orders. Always request a proforma invoice with full product specifications before payment.
For quality assurance, request a sample batch for performance testing under load. Use a capacity tester to verify actual mAh output and a resistance meter to check internal impedance. Inspect for swelling, damaged terminals, or inconsistent labeling. Require a certificate of conformity for each shipment, even if no formal certification exists, to document compliance with basic safety standards.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
Securing a reliable supply chain for Bonka 1500mah 80c 4s Graphene Lipo is critical for maintaining your business operations. Bonka Co., Ltd., a verified supplier located in China, provides high-quality Bonka 1500mah 80c 4s Gra ready for international export. By connecting directly with this supplier, buyers can bypass intermediaries, negotiate custom wholesale pricing, and arrange bulk shipments. This product is a key offering within the Battery Testers & Chargers industry, catering to distributors, wholesalers, and importers worldwide.
Navigating the complexities of global sourcing is easier when you have direct access to the right manufacturers and exporters. When importing Bonka 1500mah 80c 4s Gra from China, buyers can discuss shipping logistics, packaging requirements, and preferred payment terms directly with Bonka Co., Ltd.. This seamless communication is powered by EximNext, a premier global B2B marketplace that connects ambitious buyers with verified global sellers across every major industry.
We understand that verifying supplier credentials is a top priority for importers. Bonka Co., Ltd. is part of our extensive network of vetted international exporters. Browse more products in the Battery Testers & Chargers category or discover new suppliers across the Battery Testers & Chargers sector. Expand your sourcing capabilities through our trusted import export marketplace — the import export marketplace built for serious international trade.
When importing Bonka 1500mah 80c 4s Gra from China, buyers should consider shipping terms (FOB, CIF, EXW), customs documentation requirements, and payment security. Contact the supplier to discuss the best logistics options for your destination country.
Click the "Request Quotation" button to contact Bonka Co., Ltd. directly. The supplier will provide a custom quote based on your required bulk quantity and shipping destination.
Yes, Bonka Co., Ltd. provides Bonka 1500mah 80c 4s Gra for bulk export from China. You can negotiate the MOQ, packaging details, and shipping terms directly with the supplier.
Shipping terms such as FOB, CIF, or EXW can be negotiated directly with Bonka Co., Ltd.. Contact the supplier to discuss the best logistics options for importing Bonka 1500mah 80c 4s Gra to your country.
Send a direct message to Bonka Co., Ltd. through our platform to request a product sample before committing to a large wholesale order.
Bonka Co., Ltd. is a registered and verified supplier on EximNext. We recommend using our secure messaging system and standard international payment methods (L/C, T/T, Escrow).
Request a detailed product data sheet including grade, purity, dimensions, material composition, and applicable industry standards from Bonka Co., Ltd..
Many suppliers on EximNext, including Bonka Co., Ltd., offer custom packaging and private label options for bulk wholesale orders.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services.
Yes, EximNext hosts a wide network of verified Battery Testers & Chargers manufacturers, exporters, and wholesalers across 200+ countries.
Click "Request Quotation" or "Contact Supplier" on this page. Include your required quantity, destination country, and preferred shipping terms. All communications are managed securely through our global B2B marketplace.
Discover more products in Battery Testers & Chargers from verified suppliers worldwide.